Safety production management measures in construction site

Safety production management measures on the construction site

Through production planning, the scheme for optimal operation of the production system is formulated; Through the production control work, we can timely and effectively adjust all kinds of relationships inside and outside the enterprise's production process, so that the operation of the production system meets the requirements of the established production plan, and achieve the goals of expected production varieties, quality, output, production period and production cost. I have prepared the management measures for safety production on the construction site for you. Welcome to read.

1. Enhance the safety awareness of leaders and establish and improve the safety production guarantee system.

(1) urge the leaders of all construction units to firmly establish? Safety first, prevention first? The idea, resolutely implement the principle that production must be safe, and put safety in production on the important agenda. Seriously implement the relevant? Safe production and civilized construction? The provisions of the. Strictly implement the responsibility system for production safety, so that leaders at all levels and functional systems can take responsibility and ensure the implementation of various production safety systems, plans and measures.

(2) urge the construction unit to establish and improve the full-time safety organization, require the construction unit to be equipped with full-time safety technical cadres in the prime of life, strengthen the leadership of the safety department, and give full play to their supervision and inspection role.

(3) check the implementation of the responsibility system for production safety of the construction unit. In particular, check whether the organization, personnel, responsibilities, safety education, safety disclosure, safety inspection, and the system of holding certificates for workers with special types of work have been implemented and violated. Who cares about production and safety? The principle of.

(4) Require the construction unit to conduct three-level safety education for the construction personnel. At the same time, it is required to strengthen the education of workers' safety production technology knowledge, and resolutely stop illegal command and illegal operation.

(5) review whether there are corresponding safety technical measures and whether the review is targeted. Whether effective single safety technical measures have been worked out for earthwork, aerial work, structural hoisting, up-and-down interchange construction, formwork support, demolition, scaffolding and other projects. Supervise and urge the construction unit to check the safety disclosure before construction, conduct spot checks during construction, and check whether the safety operation measures against natural disasters (typhoon, lightning strike, flood control, earthquake, high temperature, anti-skid, anti-virus, anti-dust and harmful gas, etc.) are implemented.

(6) Check whether the safety electricity consumption and the protection measures of mechanical and electrical equipment conform to the Technical Specification for Safety of Temporary Electricity Consumption on Construction Site (JGJ46-88). Mechanical and electrical equipment installed on the construction site should be kept in good technical condition, and it is strictly prohibited to operate mechanical and electrical facilities in spite of illness. The safety protection devices of all mechanical and electrical equipment should be complete, sensitive and effective. Check the construction facilities of various materials in the site, and the safety, health and fire prevention facilities in the site should be complete and effective.

(7) Check whether the protection and protective measures for Gao Mingkong and interchange operations conform to the Technical Specification for Safety of Working at Height in Building Construction (JGJ8-9).

(8) check whether the site construction of the construction unit conforms to the relevant provisions of civilized construction. Including construction noise control, waste residue and slurry removal, sanitary sewage facilities, construction waste treatment and other related measures.

(9) Take seriously the accidents that have occurred in the construction site, treat the general accidents as major accidents, and treat the attempted accidents as accidents that have occurred. What are the hidden dangers of accidents that have been found out, and ask the construction unit to do? Sanding? That is, the person in charge of the solution, the time for the solution, the solution measures, and the recent review to urge the solution.

2. Require the construction unit to strengthen safety inspection, and emphasize the safety of the construction site to supervise the normal operation of the quality assurance system.

(1) Before starting work, the construction unit is required to compile safety technical measures and do a good job in safety technical disclosure according to the hydrological, geological, meteorological and facilities data of the construction site and the safety technical regulations of relevant departments.

(2) It is required that all machines, tools, equipment, facilities, materials, components, etc. on the construction site should be stacked and arranged according to the layout of the site construction stage, so as to ensure smooth and smooth roads on the site.

(3) supervise and inspect the construction unit to do a good job of anti-theft, fire prevention and prevention of bad guys' destruction at the construction site.

(4) It is suggested that safety production slogans and safety color codes should be hung at the entrance of the construction site and at the dangerous operation parts to remind employees to pay attention to safety production at any time.

(5) All personnel entering the construction site are required to obey the unified command of the general contractor, abide by various safety production management systems, and use personal protective equipment correctly. Anyone entering the construction area must wear a safety helmet, and work at heights must wear a safety belt. It is forbidden to wear slippers, high heels or enter the site barefoot.

(6) Check the certificates of technical jobs such as the operation of all kinds of mechanical equipment, electricians, scaffolders, riggers, welders and drivers, and require special operators to hold relevant certificates.

(7) All projects more than 3 meters should take protective measures against shortage of funds, and the erection of scaffolding and safety nets must conform to the regulations and standards.

(8) It is forbidden to use mechanical excavation in fire water pipelines, cables, communication cables and liquefied gas pipelines. Manual excavation should be used, and special personnel should be assigned for supervision to prevent accidents.

(9) supervise and check whether all kinds of safety equipment, facilities, signs and color codes in the construction site are complete, and emphasize that no one is allowed to dismantle them without authorization. If they must be dismantled due to construction needs, they can only be dismantled with the consent of the construction director and the safety management department.

(1) check the implementation of measures to prevent falling from a height, object strike, mechanical injury, electric shock and fire.

(11) No parking on the road. Traffic roads should be kept smooth, and they should not be excavated or cut off at will. If the land must be excavated due to the needs of the project, the formalities should be handled with the consent of the owner in advance and the repair should be made within a time limit. Measures must be taken to ensure safe passage during excavation.

(12) Review the construction power plan. Insulated wires must be used for the construction power lines, and the vertical and horizontal distances between the overhead power lines and other buildings (structures) should comply with the provisions on preventing accumulation in the power lines. It is forbidden to connect the power supply without permission. Non-electricians are not allowed to engage in electrical operations, and all irrelevant personnel are not allowed to enter the transformer area at will.

(13) Require the construction unit to report all kinds of major accidents to the owner and the project supervision department in time, and submit the accident report in time.

3. Management measures for on-site civilized construction

(1) Suggest the owner to formulate? General layout management regulations? , strengthen the management of construction layout. The construction unit must have an accurate construction layout in the construction organization design or construction technical scheme, and report it to the project supervision department for approval. It also requires the construction unit to set up temporary facilities according to the functional areas divided by the approved general plan, pile up materials and equipment, and stipulate corresponding systems to punish violators to ensure the civilized and orderly construction site. If it is necessary to change the general layout of the construction due to the needs of the project, it should first apply to the project supervision department and the owner for AC power before implementation.

(2) urge the construction unit to set up a leading group for on-site civilized construction. Put civilized construction site management on the agenda of project management.

(3) Set up obvious signs on the construction site. Indicate the project name, owner, supervision unit, design unit, construction unit and construction project manager's name, commencement and completion date, construction permit approval number, etc., and the construction unit shall be responsible for the protection of signs on the construction site.

(4) The main management personnel of the construction unit shall wear identification cards to prove their identity at the construction site. Slogans, safety color codes or posters should be hung at the entrance of the construction site and dangerous operation parts to remind employees to pay attention to safety in production at any time.

(5) Check whether there are targeted civilized construction guarantee measures in the construction plan, so as to comply with the safety production system of relevant countries and local governments, strengthen the plane management of the construction site, and establish a good production order of safe production and civilized construction.

(6) urge the construction unit to carry out civilized construction education, labor protection dress and show certificates. Abide by various safety production management systems.

(7) For all employees participating in the construction, the contractor's management personnel are required to give them entrance safety education, post safety operation technology education and civilized construction education. Resolutely stop illegal command and illegal operation.

(8) Require the construction unit to assign the responsibility for civilized construction to people. It is suggested that the project production manager should focus on civilized construction, and the builder should be responsible for the specific civilized construction management, so that the safety and civilized construction guarantee measures in the construction organization design can be seriously implemented when organizing production, and there is a reward and punishment system.

(9) at the weekly supervision meeting, civilized construction should be discussed as a special project.

(1) once various problems are discovered, measures must be taken to correct them to avoid recurrence. No matter which level, department or person is involved, it will never be tolerated, and it must be rectified and implemented, and it will be punished according to the relevant regulations according to the seriousness of the case; If the results are outstanding, they will be rewarded according to the reward and punishment method.

(11) supervise and inspect the stacking management of materials, semi-finished products and machines and tools on the construction site. Stack bulk materials, semi-finished products and machines and equipment according to the general layout of construction, and do not encroach on the roads and safety protection facilities in the site. The materials department should ensure the timely supply of materials, process equipment required for safety technical measures, ensure that the purchased safety nets, safety helmets, safety belts and other labor protection articles and appliances meet the safety technology and quality standards, regularly check all kinds of scaffold materials, and ensure that the quality materials of the supplied appliances and materials should be managed frequently, used strictly and quantitatively, and the bulk materials should be recycled in time. The materials shall be stacked neatly, with the lower cushion and the upper cover.

(12) The construction unit is required to strengthen the management of construction machinery for the construction site machinery. Construction machinery shall be set in accordance with the location and line specified in the general layout of construction, and shall not arbitrarily occupy the roads in the field. Construction machinery must pass safety inspection before entering the site, and can only be used after passing the inspection. Construction machinery operators must establish a unit responsibility system, and hold relevant certificates in accordance with relevant regulations, and unlicensed personnel are prohibited from operating. Construction machinery should be placed neatly, the fuselage should be kept tidy, the tag number should be clear, the safety device should be sensitive and effective, the inside and outside of the shed should be clean, and the operation should be convenient. The mixing station should be listed and stirred, and it should be cleaned after the day. The equipment management department should always check, repair and maintain the mechanical and electrical equipment, so that the equipment is in a good technical state, and it is strictly forbidden for the mechanical and electrical facilities to operate in spite of illness. Ensure that the safety protection device is complete, sensitive, effective and reliable. Mechanical operators should be trained and certified.

(13) emphasize the safe use of electricity. Insulated wires must be used for construction power lines, and the vertical and horizontal distances between overhead power lines and other buildings (structures) should comply with the provisions of protection regulations in power lines. It is forbidden to connect the power supply without permission. Non-electricians are not allowed to engage in electrical operations, and all irrelevant personnel are not allowed to enter the transformer area. The installation and use of power lines and facilities on the construction site must conform to the installation specifications and safety operation procedures, and be erected according to the construction organization design. It is strictly forbidden to connect wires at will. Line poles are arranged neatly and securely. The construction site must be equipped with night lighting to ensure the construction safety requirements; Lighting in dangerous and humid places and hand-held lighting lamps must use voltages that meet safety requirements. When constructing near high-voltage lines, the regulations on power supply and fire fighting should be observed. Within seven meters below the high-voltage line, materials are not allowed to be piled up, supervision facilities are not allowed to be erected, and mechanical equipment is not allowed to be parked. When lifting and hoisting on one side of the high-voltage line or other erection lines, it is required to comply with the regulations issued by the Ministry of Labor? Safety management regulations for hoisting machinery? The provisions of the requirements, the construction site should be equipped with enough effective fire fighting equipment, materials are not allowed to be piled up within five meters around the fire hydrant.

(14) Strengthen the fire control management of the construction unit. Effectively strengthen the management of fire sources, inflammable and explosive articles should be specially stocked by special personnel, and fire prevention tools are complete. The construction unit shall, in strict accordance with the provisions of the Fire Protection Regulations of the People's Republic of China, establish and implement a fire protection management system at the construction site, set up fire protection facilities that meet the requirements of fire protection, and keep them in good standby condition. When constructing or storing and using inflammable and explosive equipment in fire-prone areas, the construction unit shall take special fire safety measures. ;