Q&A of Factory Safety Education Examination

1, China's safety production policy is.

2. People's Republic of China (PRC) Mine Safety Law was implemented in.

3. The Labor Law of People's Republic of China (PRC) has been implemented since.

4. The Law of People's Republic of China (PRC) on Work Safety came into force on.

5. The Law of People's Republic of China (PRC) on the Prevention and Control of Occupational Diseases came into force on.

6. It is forbidden for all personnel to go into the well before going into the well, and they must carry and wear it when going into the well.

7. team realization? Three noes? The goal is: no individual, no post, no team.

8. The Class A hazards in our mine are,,,, etc.

9. The main causes of electric shock accidents are: (1); (2) ; (3) ; (4) 。

10, is it safe? Six? Refers to: there are wheels; Axis has; Platform ladders include: pit hooks, holes and pools; The dangerous place is; There is one in the factory.

1 1. The theme of this year's National Work Safety Month is:

Second, choose to fill in the blanks.

1. Any work that may fall at a height of () meters or more is called aerial work.

A 1.5m b 1.8m c2m d2.5m

2. The General Safety Requirements for Lifting Operation stipulates that the included angle between lifting ropes should be less than (); When people enter the lower part of the hanger, they should first contact () and set up a support device.

A 100 leader B 90? Team leader C 120 driver D 180 commander

3. According to Article 26 of the Mine Safety Law of People's Republic of China (PRC), special operators must accept () and obtain () after passing the examination before taking up their posts.

A specialized training operation qualification certificate b training certificate

C. Education leaders agree with D. Safety education and safety institutions.

4. Insist on accident investigation and analysis? Four don't let go? The principle is: () If the analysis is unclear, don't let go, those responsible for the accident and the masses don't let go, don't let go, and those responsible for the accident don't let go. A preventive measures b not educated to deal with c accident cause d.

5, according to the provisions of article 22 of the "People's Republic of China (PRC) production safety law", the production and business operation entities must understand and master the safety technical characteristics of new technologies, new processes, new materials or new equipment, and conduct () for employees.

A. Specialized safety education and training B. Unified training management

C. Recruit and create jobs. D. Safety education before work.

6. According to Article 46 of the Law of People's Republic of China (PRC) on Work Safety, employees have the right to put forward (), report and () the problems existing in the work of work safety in their own units; Have the right to refuse illegal command and force risky operations.

A questioned b accused c criticized d revealed.

7. According to the provisions of the assessment method of the economic responsibility system for production safety of this unit, labor protection articles should be fully dressed. If it is found that 1 person is not fully dressed, () points will be deducted and () yuan will be deducted.

A 2、20 B 5、20 C 5、50 D 2、 100

8. According to the provisions of the assessment method of the economic responsibility system for production safety in our unit, employees have mastered the post safety operation procedures, and found that 1 person failed in the exam, and deducted () points and fined () yuan.

A 2、20 B 5、20 C 5、50 D 5、 100

9. According to the provisions of the Assessment Method of Economic Responsibility System for Work Safety of our unit, it is found that 1 person is not wearing complete labor protection articles, so () points will be deducted and () yuan will be deducted.

A 2、20 B 2、 100 C 5、 100 D 5、50

10, in the process of gas welding, the distance between oxygen cylinder and acetylene cylinder should not be less than () meters, and the distance between oxygen cylinder and open flame should not be less than () meters.

A 2 m B 10 m C 2.5 m D 5 m

Three. Noun explanation (two optional questions)

1, what is labor protection?

2. What is three-level safety education?

3. What are the four obeisances of safety work?

4. What is safe production?

4. Short answer questions (choose a question)

1, what do you mean by the general principles of employee safety?

2. What do you mean by the "20 prohibitions" in the production area?

3. Briefly describe the significance of carrying out hazard prediction activities.

Answer:

1. 1, safety first, prevention first 2. 1993 5 1

3、 1995 1 1 4、2002 1 1 1 5、2002 5 1

6, drinking lighting safety protection articles 7, illegal accidents

8, stope slope tailings dam explosive depot liquefied gas station pharmacy room

9.( 1) Lack of electrical safety knowledge (2) Violation of safety operation regulations (3) Unqualified electrical wiring equipment (4) Poor management.

10, with protective signs covering the railings, sidewalks 1 1, obeying the law and caring for life.

Second, 1, 2m 2, 120? 3, the driver specialized training operation qualification certificate

4, the cause of the accident education preventive measures have not been dealt with.

5, specialized safety education and training 6, criticism and report

7、5 50 8、5 100 9、5 50 10、5 10

Iii. 1 In order to protect the safety and health of workers in productive labor, the comprehensive protection measures taken in legal system, organization and management, technology and education are called labor protection.

2, the enterprise for new workers into the factory safety education, workshop education and team post education, known as the three-level safety education.

3, safety and production tasks should be subject to safety work when there is a contradiction; When there is a contradiction between safety and equipment status, obey safety work; When there is a contradiction between safety and construction progress, obey the safety work; When safety conflicts with other tasks, safety work must be obeyed.

4. Safety in production refers to efforts to improve working conditions, overcome unsafe factors, prevent casualties and ensure the smooth progress of labor production under the premise of ensuring the safety and health of workers and the safety of state property and people's lives and property.

Iv. 1, (1) Consciously abide by the rules and regulations of production safety, do not operate illegally, and stop others from operating illegally at any time. I don't hurt myself, others and others.

(2) Constantly improve safety awareness, enrich knowledge of safety production, and enhance self-prevention ability. I want to be safe, I will be safe, I manage safety, and I guarantee safety.

③ Take an active part in various safety production activities.

(4) Care and correct use of machinery, equipment, tools and personal protective equipment.

(5) Put forward suggestions to improve safety in production.

2.( 1) Smoking is prohibited in the fire and explosion-proof area;

(2) Children are not allowed to enter the production area;

(3) Motor vehicles without flame arresters are not allowed to drive in the no-burn zone;

(4) You are not allowed to sleep, do private things, leave your post or do things unrelated to your post during working hours;

(5) Do not drink alcohol before or during class;

(6) Don't blow dust with oxygen;

(7) Do not enter the work area without wearing labor protection clothes;

(8) Equipment with incomplete safety devices is not allowed to be used;

(9) Do not use other people's equipment and tools;

(10) When the equipment is overhauled, it shall not be overhauled before the safety measures are implemented;

(1 1) After equipment overhaul, it is not allowed to start trial operation without thorough inspection and safety confirmation;

(12) Climbing operations are not allowed without wearing a seat belt;

(13) If scaffolding and springboard are not firm, please do not start work;

(14) Asbestos tiles and old iron tiles are not allowed to be operated without fixed pedals;

(15) Hand-held power tools are not allowed to be operated without electric shock protector; (16) Do not cross the belt, roller table and electromechanical equipment;

(17) It is forbidden to walk and pass under the lifted objects;

(18) It is forbidden to clean, wipe and repair running equipment;

(19) No fighting in class;

(20) It is forbidden to drill through the railings and vehicles at the railway crossing, and it is forbidden to walk or stay on the railway.

3. Significance of hazard prediction activity: Hazard prediction activity is a mass activity based on production teams and groups, aiming at production characteristics, technological processes and dangerous objects? Self-management? Safety activities, the purpose of which is: to improve the safety awareness of all employees, enhance the ability to identify and predict dangers, and improve the predictability of accidents of employees; Reduce the frequency of accidents caused by illegal and unsafe behaviors; Enhance the knowledge of self-help and mutual rescue of all employees and promote the unity and cooperation of employees; Improve the urgency of workers' timely rectification of unsafe factors on site; Reduce the accident rate.

?