How to unload the electric car roof?

Dismantling method of electric vehicle roof: Simple roof is easy to disassemble, just use a wrench to remove the reflector, remove the fixing bracket and untie the rope at the back. Generally, an open-ended wrench of 12- 14 is used.

For more complicated sheds, there are supports at the front and back. Dismantle the umbrella first, then the bracket. According to the order from top to bottom, demolition in turn. There are many tools used in this. Cross crane, flat crane, open-ended wrench, socket wrench.

If the bracket is welded and fixed, an angle grinder is needed. This situation is relatively rare. Furthermore, some awnings are supported on the directional columns, so you have to remove the front car shell and loosen the screws of the directional columns, which is a bit complicated. Generally speaking, disassembly is much easier than installation. It is easy to destroy, but difficult to build.

The act of installing the roof not only affects the safety of others and oneself, but also violates the provisions of China's Road Traffic Safety Law: the overall size, quality, braking, bell and night reflective device of non-motor vehicles should meet the safety technical standards of non-motor vehicles. Installing an umbrella or canopy on an electric vehicle is an illegal act to change the overall size of a non-motor vehicle.