How to make a cement flower pond?

Preparation tools: red bricks, cement, sand, buckets, shovels, hoes, cement shovels and washing tools.

Step 1: Determine the position of the flower pond and circle the shape and size of the flower pond.

Step 2: Dig the soil according to the determined outline and the situation of the house. Because the paved flower pond is not high, the digging depth does not need to be too deep.

Step 3: Prepare a big basin or bucket filled with clear water and put the bricks to be used into the water. Because the red brick is porous, a certain amount of gouache is stored in the pores in the middle, and soaking the red brick in water can delay the drying speed of cement.

Step 4: Pave the foundation material in the digging hole. The width of the gully is the same as the width of the brick, and the depth of the gully in the figure is average.

Step 5: Dig trenches with hoes and shovels, and then flatten and compact the pavement hammer with shovels.

Step 6: Mix water and cement to form cement mortar for foundation.

Step 7: Use cement mortar as the base and spread a layer of cement mortar with the thickness of1-2cm.

Step 8: build red bricks, so that the cement and bricks can be fully bonded.

Step 9: Tap the built bricks gently to keep them horizontal and bond them with cement mortar.

Step 10: The joint filling between the brick joints in the flower pond is not beautiful. At this time, the cement mortar between brick joints needs to be brushed evenly with a brush.

Step 11: Rinse with plenty of water.

Step 12: Clean up and finish.