What should I do if there is noise when I open the window after pasting the window film?

The glass film in the window is crusted by friction, or there are foreign bodies in the joints, or there are residual glue. You can go to the membrane construction shop to find construction personnel to check the situation and help solve it. After sticking the film, in order to avoid damaging the heat insulation film, it is best not to lift the window glass for 5-7 days.

Because it takes a certain time for the thermal insulation film to be fixed on the window, if the window glass is opened and closed during this period, the edge of the newly attached film will be tilted, and the film that has not been completely attached is also prone to displacement.

It is forbidden to open the window after the thermal insulation film is attached to the window glass, but it is also necessary to pay attention to: do not wash the car within 3 days, and do not wipe the surface of the film with a cloth containing chemical solvents.

Extended data:

Window defogging

1, properly open the window, let the air inside and outside the car circulate, keep the temperature consistent, and avoid condensation on the inner surface of the windshield.

2. Turn on the air conditioner, adjust the temperature in the carriage and eliminate the fog on the windshield.

3. Once the fog beads condensed on the windshield affect the line of sight, don't wipe it while driving. Stop and wipe with a clean towel before driving.

4. Apply a thin layer of glycerin, alcohol or salt water on the windshield as an antifogging agent to prevent the inner surface of the windshield from fogging in a short time.

5. Pour a little detergent on the wet cloth and rub it evenly on the inside of the windshield, which can effectively keep it from fogging for 20 hours. When the weather clears or the line of sight improves, just wipe off the liquid film on the windshield with a clean wet towel.