What are the commonly used technical terms for concrete mixing station equipment?

The following summarizes the common technical terms of concrete mixing station equipment for you, hoping to help those users who are new to concrete mixing station equipment and you who want to become a technician!

Productivity of concrete mixing station equipment

Under the specified test conditions, the amount of concrete produced by the concrete mixing station (building) per hour (calculated by the volume after tamping). The test conditions are as follows: a, the supply of concrete component materials is sufficient, the finished concrete is discharged in time, and the concrete mixing station (building) runs continuously; B, the concrete mixture ratio remains the same, the aggregate gradation, cement variety and label, concrete label, slump and water consumption all conform to GB4477c, and the concrete quantity for each circulating mixing is calculated according to the nominal capacity of the concrete mixing unit; D, do not add additives and additives, and do not dry stir.

model

Concrete mixing plant equipment (building) consists of assembly code, installation unit, mixer form code, main parameters and modification or update code. Among them, HZ is the concrete mixing station and HL is the concrete mixing building; The number of installation units adopts Arabic numeral standard, and a single unit can be omitted; The model code of the mixer is double horizontal shaft S, single horizontal shaft D, planetary type T, vortex type W, conical oblique discharge type F and conical reverse discharge type Z; The main parameter code is the productivity in m3/h; Change or update codes are represented by a, b and c.