How to deal with printing sticking to Cobb paper?

1. When using wallpaper paint mold for wall construction, be sure to ensure that the wall is flat and the putty is leveled. Don't scratch hard where the bumps meet, but master the strength of painting.

2. Wash the mold with clean water after use, but it is forbidden to brush this kind of thing to ensure that the screen is not gambling and the box should be cleaned.

3. Wash and dry, but don't expose yourself to the sun.

4. After drying, put it in a cool place.

Matters needing attention of China liquid wallpaper mold

China 1 adopts liquid wallpaper mold.

China's (1) mold is only suitable for wallpaper, paint and coating, and paint is not used for other varieties.

⑵ Use fine sandpaper to polish the front new blade to avoid scratching the mold.

(3) Don't use molds. Intermittent molds for long-term housing construction should be cleaned in time to avoid blockage.

2, mold storage

(1) Don't store other sharp objects around the mold to avoid scratching the surface of the mold.

⑵ Wash multiple molds at a time, and be careful not to stick together back to back when drying, so that the dried molds will stick together and are not easy to separate, and forced separation will damage the mold surface.

⑶ Soft film storage: Clean wet cloth soft films should not be stacked together. The soft corners of the best films of the two clips are hung to dry or the soft films are spread on the glass to bond a single soft film. You can use a soft dry film hanger or roll a newspaper to dry and store. If the soft films stick together, they can be separated for a few minutes and then soaked in water.