Safety Hazard Rectification Report Sample

#report# Introduction Whether at work or in life, the topic of safety is only increasing in popularity. The following is a sample safety hazard rectification report, welcome to read!

Sample report on rectification of potential safety hazards

In order to ensure the safety of teachers and students in our class, our class has long regarded safety work as a top priority and a major event every day. . We have established a safety working group and regularly conduct inspections on class safety work.

The self-examination situation is now reported as follows:

1. Attach great importance and improve the system.

The safety management of our class has been further standardized and institutionalized. We have formulated safety work plans and systems, adhering to the principle of safety first and prevention first, through class meetings, group meetings, inter-class assemblies, etc. Propaganda and education have strengthened the safety awareness of teachers and students to prevent and eliminate the occurrence of all safety accidents.

2. Establish a position and conduct long-term publicity.

We have written fixed safety slogans in eye-catching places in the classroom, such as "Nothing is trivial in school, safety is greater than the sky", "Safety work should be carried out every year, every month, every day, every time", etc.

3. Management is in place and always focuses on key points.

Regularly investigate, monitor and rectify all types of safety hazards at all levels within the class. The class safety work has been carried out unremittingly. Educate students not to climb walls, railings, handrails, doors and windows on campus.

4. Students are required to pay attention to food hygiene and safety.

Educate students not to buy expired and spoiled food, food and "three noes" products. Our class regularly checks the inside of students' schoolbags and desks to see if snacks, etc. are stored.

5. Students are required to dress safely.

We have checked the clothing of each student. If there is any unsafe clothing (such as wearing bare-soled shoes that can easily cause falls and slips), we require students not to continue wearing them and to change them in time.

6. Educate students on fire, waterproof, explosion-proof and theft-proof safety.

We educate students to improve fire prevention, explosion prevention, and safety awareness. Do the "five don'ts", that is, don't play in crowded places, don't play under tall buildings, don't play on ice, don't play on roads with many vehicles, and don't play at construction site gas stations.

7. Unite as one to prevent and control intrusion.

Our class, from teachers to students, unites as one, condenses into a force, forms a kind of popularity, creates a momentum, puts an end to all behaviors that are not conducive to students' physical and mental health, and strictly prohibits students from entering and exiting Internet cafes and game consoles. room.

8. Pay enough attention to corridor safety and traffic.

Educate students to abide by the teaching building management regulations and go up and down the stairs in a civilized and orderly manner. Don't play around in the corridor. Every day after school, we must insist on escorting students to the designated road section of the school, and stay to direct students when they cross the road; before the road team leaves school, they must form a team to publicize and emphasize traffic rules.

In short, school safety is a top priority and we must continue to work on it. Our safety management must be institutionalized, standardized, specific and regular.

Part 2 Safety Hazard Rectification Report Sample

Schools are places where students and children learn. If there are safety hazards in school facilities, it will endanger the lives of children in school. In order to conscientiously implement the spirit of the safety work meeting held by Xinmi City Education and Sports Bureau and West Street Central School on May 4, 201X, strengthen school safety management, ensure the school’s normal education and teaching order, and create a safe campus, our school carries out safety hazard inspections based on specific conditions. The investigation work has achieved certain results. The progress of the work is now reported as follows:

1. The leadership pays attention and the responsibilities are in place

Our school has established a team with the principal as the team leader and is in charge of leadership As the deputy team leader, the safety work leading group with each year's section leaders and class teachers as members immediately held a working meeting on carrying out safety hazard inspection activities. At the meeting, Principal Xu organized all teachers to learn the spirit of the meeting and required all classes to fully implement the spirit of the meeting, refine responsibilities, conduct blanket inspections of various facilities in the school and surrounding environment, and keep records. Immediately carry out repairs to the best of our ability on facilities that do not meet safety standards, and promptly report safety hazards that cannot be solved by ourselves.

2. Increase efforts and improve efficiency

The principal is responsible for comprehensive inspection and supervision work, and the head teachers of each class implement safety education for students, so as to ensure inspection and prevention at the same time. The specific situation is as follows:

1. Convene a school meeting to learn again the spirit of the safety hazard investigation meeting, and use the teacher meeting to organize learning and understanding of the Xinmi City Education Bureau's "Notice on Carrying out Special Actions to Investigate and Control School Safety Hazards" spirit, so that all teachers can improve their awareness of action and actively participate in this investigation activity.

2. Use various forms of activities such as class meetings, red scarf radio stations, and newspapers to promote safety laws and regulations and strengthen students' safety awareness.

3. Convene a parent meeting to expand the influence and allow the whole society to participate in the safety inspection work.

4. Distribute 200 copies of safety education notices to parents.

5. Write 20 promotional slogans.

After the investigation mobilization and publicity meeting was held, each class actively implemented responsibilities and divided labor and cooperated. All teachers and students took action, taking investigation as their own responsibility, reporting hidden dangers in a timely manner, and striving to block and prevent the source of hidden dangers. safety incidents occur. The investigation contents include campus infrastructure, transportation, food hygiene, and public security inside and outside the campus. After the investigation, our school promptly organized personnel to carry out emergency repairs; replace and repair classroom power switches; package wire insulation glue; reinstall and replace lighting street lamps; replace class window glass, etc.

3. Improve measures and raise awareness

1. Improve the guard duty system, strictly restrict the entry of people who have nothing to do with the school, prevent students from being harmed by criminals outside the school, and ensure the school property safety.

2. Regularly inspect, repair and replace school buildings, venues, sports, cultural and living facilities to ensure safe use.

3. Carry out relevant activities in conjunction with the Safety Education Day for primary and secondary school students, and invite the school’s vice principal of legal affairs and external counselors to give reports to teachers and students to improve safety awareness.

4. Strengthen emergency drills for students and improve their ability to handle emergency incidents. Prevent stampede accidents among students; check doors, windows, and class facilities for potential safety hazards; educate students about safe use of electricity and prevent fires; and prevent the spread of infectious diseases.

IV. Existing problems:

Since our school attaches great importance to safety work, there have been no safety accidents in the school so far. There are no obvious safety hazards. However, through inspection, the school will still attach great importance to the following issues.

1. The teaching corridors are narrow. The school will increase the inspection and management of the corridors between classes, strictly prohibit crowding in the corridors, and require students to go up and down the stairs in an orderly, disciplined and civilized manner.

2. The first 30 meters outside the school gate is the residential building passage. There are many vehicles, there are no obvious safety signs, and the people and vehicles are crowded.

3. There are many vehicles parked and parked randomly at highway intersections, and some small vendors sometimes set up stalls to occupy the road for business.

4. Some motorcycles pick up students outside the school after school in the afternoon, and they are overloaded.

5. Fire-fighting facilities need to be improved.

As a base for cultivating talents, schools also shoulder the heavy responsibility of student safety. All teachers and students must establish the awareness of safety first, and the school should make safety work the top priority of the school work. Only by unremitting efforts can ensure the orderly progress of other work. Our school will use this safety hazard investigation and management activity as a reference to institutionalize safety inspection activities, establish a long-term mechanism, conduct regular inspections and maintenance, and make our school truly a harmonious and safe campus, laying the foundation for the healthy development of education and teaching in the future. foundation.

Part 3 Safety Hazard Rectification Report Sample

1. The shopping center has reviewed fire hazards or other unsafe factors discovered during fire inspections, post self-inspections, and fire inspections. After determination, corresponding handling should be carried out in accordance with this system. Relevant departments should rectify fire hazards according to their respective responsibilities without shirk or delay.

2. Fire hazards include fire safety hazards discovered by the shopping mall security department’s fire prevention inspections, post self-inspections and fire prevention inspections, and fire hazards identified by the public security firefighting agency.

(1) Fire hazards identified in shopping mall fire inspections, post self-inspections, and fire inspections:

1. Shopping mall fire inspections and inspectors discovered the following violations of fire safety regulations , deal with the relevant personnel in accordance with the provisions of the fire safety work evaluation and reward and punishment system, order them to make corrections on the spot (issue a fire safety violation notice>) and supervise their implementation:

(1) Illegal use of open flames or work in Violating prohibitions on smoking or using open flames in business premises.

(2) Locking or blocking the safety exits, or occupying or stacking items that affect evacuation passages.

(3) Fire hydrants and fire-extinguishing equipment are blocked, affecting their use, or are used for other purposes.

(4) The normally closed fire door is open and items are piled under the fire shutter, which affects the use.

(5) Illegal closing of fire-fighting facilities and cutting off fire-fighting power.

(6) Other behaviors that can be corrected on the spot.

2. The fire supervisor of the Security Department checks the inspection system data on a daily basis (by comparing the inspection data of two adjacent inspection shifts) to check the on-site correction of the above problems and archive them for future reference.

3. For fire safety hazards discovered during inspections or inspections or reported by the department that cannot be corrected on the spot, a "Fire Hazard Rectification Notice" should be printed through the function set up in the inspection system to clarify the time limit and requirements for rectification. It is issued by the person responsible for fire safety of the Security Department and orders relevant departments to make rectifications.

(1) For fire safety hazards involving fire protection facilities and key parts, the property engineering department is ordered to be responsible for rectification within a time limit.

(2) For fire safety hazards involving other departments, order the fire safety person in charge of the responsible department to correct them within a time limit.

4. After the fire hazard rectification is completed, the fire safety person in charge of the security department signs the rectification record and reports it to the shopping mall fire safety manager for confirmation and signature, and files it for future reference.

5. For fire safety hazards or major fire hazards that are indeed difficult to rectify in a timely manner (in terms of time, technology, funds, etc.) and cannot be rectified in a timely manner, the Security Department is responsible for proposing solutions and reporting them in a timely manner. The shopping center reports to the higher authorities.

(2) Fire hazards identified by the public security firefighting agency:

1. Fire safety hazards identified in relevant legal documents issued by the public security firefighting agency should be corrected within the prescribed period And write a reply letter on fire hazard rectification and submit it to the public security fire department.

(1) For fire safety hazards involving automatic fire protection facilities and key parts, the Property Engineering Department is ordered to be responsible for rectification within a time limit.

(2) For fire safety hazards involving other departments, order the fire safety responsible person of the relevant department to correct them within a time limit.

2. For fire safety hazards that require a large amount of funds to rectify and are indeed difficult to rectify, the Security Department will formulate a specific rectification plan, including the hazard situation, rectification plan, rectification time limit, implementation department, etc. , and the security department will be responsible for implementation after approval from the person in charge of fire safety in the shopping mall.

Part 4 Safety Hazard Rectification Report Sample

In order to create a safe and civilized campus, create a good teaching and educating environment, to completely eradicate safety hazards, and ensure the life and property safety of teachers and students in school , to ensure the smooth development of education and teaching work in each school and the normalization and standardization of teaching order. Not long after the start of the school year, the school's administrative leadership team carefully and thoroughly investigated the safety hazards within the school and made timely rectifications. Currently, the rectification effects are obvious. The investigation and rectification work is now reported as follows:

1. Investigation of safety hazards

Recently, our school has inspected the campus and surrounding environment, and we found that there are still some safety hazards:

1. There is a bridge slope about 30 meters before the school entrance. There are many motorcycles and other vehicles, and there are no obvious safety signs.

2. Students’ bicycles park randomly on campus and block passages.

3. The food racks at the entrance of the boiler room are stored in an open manner and there is no safety guarantee.

4. The road at the entrance to the student dormitory is potholed, making it inconvenient for students to walk.

5. The D-level dilapidated buildings in Central Park are still in use.

6. The poncho leading from the classroom to the kindergarten in Daji Primary School is in danger of collapse.

7. The wall of Xiaoji Primary School collapsed and blocked students’ access to school.

8. There is a dead pine tree in a corner of the school and is in danger of collapsing.

2. Strengthen rectification and organize implementation.

In response to the above related situations, we have done a lot of work.

1. Raise awareness and strengthen safety education leadership and management. In order to further strengthen the school's daily safety management work, firmly establish the idea of ????"safety first", and effectively implement the safety work responsibility system, our school carefully organizes all teachers and students in the school to study relevant safety education documents from superiors, and learn from the lessons of recent safety accidents in other areas. , the school has formulated relevant safety work measures and corresponding emergency plans.

2. Strengthen safety education and management of students. Our school strictly implements the regulations and requirements of the "Safety Management Measures for Primary and Secondary Schools and Kindergartens" and the "Guidelines for Safety Education for Primary and Secondary Schools" to further strengthen safety education for students. Our school conducts all-round safety education and publicity through blackboard newspapers, radio, morning meetings, class teams, etc., establishes safety awareness among all employees, effectively strengthens safety education for students, and educates students on how to prevent drowning, food poisoning, epidemics, traffic and other safety accidents Education and safety knowledge education in response to floods, fires, lightning and other emergencies have effectively enhanced the safety awareness and self-rescue and self-protection abilities of the majority of students.

3. Strengthen the connection between the school, various departments of society and families. According to the actual situation of our school, we organize and mobilize the whole society to care about the safety of students' lives, work together to do a good job in student safety outside the school, and sign a safety responsibility letter with the students' parents, issue a "Notice to Parents", and home visits. , parent meetings and other forms have strengthened the communication and contact between the school and parents, and obtained the support and cooperation of parents.

4. Strictly implement the first question system for safety responsibility. The school has established a leadership safety inspection system and a holiday duty system. Weekly leaders lead teachers on duty to inspect the campus every day. Any problems found by teachers should be dealt with and reported as soon as possible. The first question system for safety responsibilities is strictly implemented. The school will Report to higher authorities and the Education Bureau as soon as possible.

5. Take timely measures against discovered safety hazards:

1. Set up conspicuous safety slogans at the school entrance.

2. Set up a bicycle shed in the school to park bicycles for students and encourage students to walk to and from school.

Third, set up a protective net for the rice rack.

Fourth, renovate the student dormitory passage and build flower shops to protect the barriers.

Five submitted a report to the municipal bureau, planning to demolish and build dilapidated kindergarten buildings.

Six requires Daji Primary School to repair ponchos within this month.

Seventh, rebuild the wall of Xiaoji Primary School.

Ask professionals to cut down dead trees within eight weeks.

3. Future work

Therefore, the whole school has formed a good situation in which everyone is responsible, everyone is doing everything, there is always monitoring, there is supervision every day, and there are inspections every month. . However, due to the influence of various factors, the safety work situation in our school is still very serious, and the rectification of public security around the campus still needs to be further improved. In this regard, we carefully analyze and have the courage to face up to the existing problems in school safety and the rectification of public security around the campus. problem. We will take strong measures to further deepen special rectification, improve school safety and public security, and submit a satisfactory answer to the party and the people.

Sample Report on Rectification of Five Safety Hazards

On June xx, XX, the municipal safety supervision and law enforcement officers conducted a routine safety inspection on our company and found the following safety hazards:

1. The entry and exit of goods and vehicles into and out of the factory and into and out of the warehouse are imperfect.

2. There are insufficient human body static electricity elimination devices and insufficient eyewash facilities in Class A places.

3. The placement of materials in Class A warehouses does not meet the requirements of the specifications, and the debris is not cleared in time.

4. The fire-extinguishing equipment has expired and some fire-extinguishing equipment hoses have aged and cracked.

5. Class A workshops use electronic scales, some wire conduits in the explosion-proof area do not meet explosion-proof requirements, and the cranes do not have safety buckles. The operating procedures are not posted on the wall.

Now our company has made the following rectifications within the rectification period for the safety hazards discovered during the inspection:

1. Redesign the company’s delivery/pickup vehicle entry and exit registration form. The registration content includes: Entry/exit vehicle license plate number, vehicle usage nature, vehicle load quality, vehicle inspection validity period, driver’s name, driver’s qualification certificate number, driver’s qualification certificate validity period, escort’s name, escort’s qualification certificate number, escort’s qualifications The validity period of the certificate, the name of the goods, the quantity of goods delivered/picked up, the goods brought with the vehicle, the actual quantity of goods leaving the factory, the time of entering/leaving the factory, and the security guard on duty; the security guard is responsible for truthfully registering the incoming and outgoing vehicles according to the new registration form.

2. Purchase 8 sets of human body anti-static devices and install them at the entrances and exits of Class A warehouses and Class A workshops.

3. Purchase 3 sets of eyewash stations and install them at the exits of Class A workshops and Class A and B warehouses.

4. Category A warehouse items should be kept according to the "five distances" (the distance between the goods and the ceiling is more than 50cm; the distance between the goods and the lamps is not less than 50cm; the distance between the goods and the wall is 30cm; the distance between the goods and the inner columns of the warehouse is 10~20cm; The distance between piles (100cm) is required to be placed to keep the materials neatly placed and the site tidy. When barrels are stacked, pallets must be added between layers.

5. Inspect the fire extinguishing equipment of the entire factory, and refill the unqualified fire extinguishers (***103 sets) found during the inspection, and replace the aging and damaged equipment accessories (***75 sets).

5. Conduct a comprehensive inspection of the tools in the workshop and warehouse, and replace all barrel opening tools with copper-aluminum alloy explosion-proof tools.

6. Purchase an explosion-proof electronic scale display. Because the merchant does not have enough in stock, two explosion-proof electronic scale displays have been replaced. All will be replaced when the merchant's goods arrive.

7. The lifting hook has been equipped with an anti-falling safety auxiliary hook.

8. The wires in the metal shed at the east door of the workshop that do not meet safety requirements have been removed.

9. Safe operation instructions for each position and equipment safety operating procedures have been hung on the wall.