Steel plant safety knowledge

1. Safety education in steel plants

(1) Company-level safety education content:

1. Safety production situation of the unit and basic knowledge of production safety;

2. Relevant national laws, regulations and safety standards;

3. The unit’s safety production rules and regulations and labor disciplines;

4. Basic rights of employees and obligations;

5. Accident cases of this unit or related similar units;

6. Emergency rescue plans for major hazardous source accidents and relevant contents of plan drills and preventive measures;

7. Other content that requires training.

(2) Workshop-level safety education content:

1. The basic situation of the environment and dangerous and harmful factors in the workplace of employees;

2. Types of work performed Job safety responsibilities, operational skills and mandatory standards;

3. Employee self-rescue, mutual rescue, first aid evacuation and on-site emergency handling methods;

4. Safety equipment and facilities , the use and maintenance of personal protective equipment;

5. The safety production situation and rules and regulations of this department;

6. Measures to prevent accidents and occupational hazards and the safety that should be paid attention to Matters;

7. Relevant accident cases;

8. Other contents that require training and notification

(3) Team-level safety education content:

p>

1. Post safety operating procedures;

2. Safety and occupational health precautions for work coordination between posts;

3. Relevant accident cases; < /p>

4. Equipment performance and the use of safety devices, tools or appliances;

5. The performance and correct use of labor protection supplies (appliances);

6. Accident emergency response skills;

7. Other content that requires training.

2. Safety Education in Steel Plants

Chapter 8 of "Safety Production Management of Steel Enterprises" are introduction, identification of hazard sources, risk assessment and control, occupational safety in my country Health and safety laws, regulations and standards, policy and target management, establishment of documented management system, safety production operation control, safety production monitoring and measurement, audit and review.

At the back of the book are professional safety regulations for ironmaking, steelmaking and steel rolling. Extended information From the identification and risk assessment of hazards and hazard factors, the risks existing in the safety production of iron and steel enterprises are mainly smelting injuries, mechanical injuries, electrical injuries, fire and explosion protection, poisoning and suffocation, lifting and transportation injuries and special equipment injuries, as well as Occupational injuries.

In order to achieve safe production, the above risks should be effectively controlled. Smelting damage is mainly burns, which ranks third after mechanical damage and object strikes.

Smelting injuries come from high-temperature molten iron, splashing of molten steel and slag, fire burns such as dolomite, lime, calcium carbide, steam, hot water, hot steel parts, gas, oxygen, etc., chemical and arc burns, etc. Injuries mostly occur in the coking, sintering, ironmaking, steelmaking, continuous casting and rolling processes.

The main control measures are: provide labor protection supplies in accordance with regulations and strengthen personal protection; formulate and implement safe operating procedures and strictly standardize operations; strengthen detection to strictly prevent scrap steel from containing water and explosives; adopt detection and flaw detection and other methods to prevent equipment aging and damage. Baidu Encyclopedia-Steel Enterprise Safety Production Management.

3. Ask for some safety and production common sense in steelmaking plants

Through the study of A management model, the No. 1 steelmaking plant has improved its ideological understanding and is determined to comprehensively improve safety management. On the basis of the original inspection system, a new safety inspection system was revised and formulated, and the inspection system was further refined, determined to take the safety management of the No. 1 Steelmaking Plant to a new level.

First of all, a safety department inspection system was formulated, requiring each safety officer to wear labor protection supplies every day, correct "three violations", and then

inspect the gas system and Put more effort into smoking control. At the same time, we should provide three-level safety education for employees and carry out team activities so that each safety officer has clear responsibilities and goals. And new inspection standards were formulated for the factory's "five professional inspection teams".

The crane inspection will be carried out at 8:30 a.m. on Monday, which requires inspection of the safety device, mechanical part, electrical part and crane sanitation, and inspection standards have been formulated for each item. The spreader and electrical appliances will be inspected at 8:30 a.m. on Wednesday. The inspection parts of the spreader include crane wire rope, gantry hook, hook head, wire rope buckle, clamp, fork, iron chain ring, steel ladle and iron ladle trunnion. Electrical appliance inspection parts: high-voltage distribution room, low-voltage distribution room, transformer room, pump room, welding machine, cooling fan are inspected, and inspection standards are formulated for each item. A professional inspection of the factory and gas will be conducted at 8:30 a.m. on Friday. The location for professional gas inspection: gas pipelines within the jurisdiction of the factory. Factory inspection parts: main structure of the factory, factory columns, beams, steel structures, overhead tracks, and roof iron tiles. After the inspection, fill in the form according to the inspection items to truly ensure that the inspection items are clear, responsibilities are implemented in place, and hidden dangers are rectified in a timely manner .

Judging from the results of several inspections, the standards for various professional inspections have been greatly improved, the purpose of inspections has been achieved, and problems have been truly nipped in the bud, further ensuring safe production.

4. What safety issues need to be paid attention to when working in an ironmaking plant?

1. When entering the job, work site, or construction site, you must correctly wear labor protection supplies and protective equipment in accordance with regulations. Female workers must wear long The sender must put it into the hat; 3.

2. Personnel who have not received Level 3 safety education or who have failed the safety examination are not allowed to work. New workers entering the factory, internships, substitute training or temporary participation in labor and changing types of work, personnel returning to work from long-term illness, illness, maternity leave, and special operations personnel.

You must undergo safety education or professional training and pass the examination before you can take up the job; 3.3 Drinking is strictly prohibited 4 hours before and during the job, and violators will be dealt with seriously.

You should concentrate on your work and stick to your post. You are not allowed to do anything unrelated to work, and you are not allowed to bring children or unrelated people into the workplace; 3.

4. Equipment, facilities and workplaces must be inspected in detail before work. If any abnormality is found, it should be eliminated or reported immediately; 3. 5. No unit or individual may change the status of safety protection facilities without authorization. If necessary for work, it should be reported to the safety management personnel with safety precautions, and operations can only be performed with permission; 3.

Operators at 6 positions must be familiar with the performance, process requirements, operating procedures, and precautions of the equipment used or operated. The equipment should be operated by dedicated personnel. It is strictly prohibited for others to use it without the permission of the person in charge.

During the apprenticeship period, apprentices are not allowed to operate the equipment alone; 3.7 When entering the gas area (system), the CO concentration must be monitored to confirm that the content does not exceed the standard or that preventive measures are in place before entry and supervision by a dedicated person , It is strictly forbidden for a single person to enter the gas area (system). After the operation is completed, the site should be evacuated quickly, the number of people should be counted, and no stay is allowed; 3.

8. Operating equipment, rotating parts, and moving parts should have protective isolation devices. You are not allowed to stand or touch rotating parts, and you are not allowed to stand directly in front of objects or debris that may break and fly out; 3 . 9. When operating at high altitudes (at high altitudes) or at multi-level intersections, there must be a dedicated person to provide warning or command contact. Multiple people are strictly prohibited from commanding.

Safety belts must be worn when working at high altitudes (above 2 meters); 3.10 All electrical equipment, unless otherwise specified, must have a reliable grounding (zero) device and maintain continuity , Non-electrical repair personnel are not allowed to dismantle, install or repair electrical equipment and circuits; 3.

11 Non-staff members are not allowed to enter key departments such as the power distribution room, main control room, operation room, hydraulic station, cab, and control room without permission; 3. 12 Power distribution Private fires are not allowed in the room, main control room, operation room, hydraulic station and all non-fire places. If a fire is necessary, a fire permit must be obtained in accordance with relevant regulations and corresponding safety measures must be taken before starting a fire; If there is a fire in the gas area, in addition to applying for a fire permit and taking corresponding safety measures in accordance with relevant regulations, gas protection station personnel should also be asked to monitor on-site before starting a fire; 3.

13 Blasting operations or operations in places where there is a risk of poisoning or suffocation must be reported to the safety and security and other relevant departments for approval, and reliable measures must be taken before operation; 3. 14 Fire-fighting equipment should be There is a dedicated person responsible for safekeeping, and it is strictly prohibited to move or use it for other purposes.

No other irrelevant items are allowed to be piled around the place where they are placed, and they should be inspected and replaced regularly; it is strictly prohibited to occupy fire escapes; 3.

15 Accounts should be established for special equipment and regular inspections should be carried out. Special equipment operators must pass the examination and hold a special operation license issued by the state before they can work, and must strictly abide by safe operating procedures; 3.

16. After an accident occurs, the personnel at the post should rescue in time and report to the leadership and relevant departments. After receiving the report, the relevant departments should quickly activate the corresponding emergency rescue plan according to the type and nature of the accident to organize and implement the rescue. The principle is: first to ensure the safety of people, and secondly to protect the company's important equipment and resume production as soon as possible to avoid the expansion and spread of the accident; 3. 17 All positions should strictly abide by the shift handover system. What happened in the shift should be truthfully recorded and seriously communicated to the successor. It is strictly forbidden to be vague or conceal the facts; 3.

18. When crossing a railway crossing, you must strictly abide by the "stop once, look twice, and pass three times" system. You are not allowed to walk within 1.5 meters on both sides of the railway. It is strictly prohibited to rush through the crossing and it is strictly prohibited to walk on the railway. Walk or stay; 3.

19 "Everyone is responsible for production safety." All employees should conscientiously perform their obligations in accordance with the requirements of the "Production Safety Law", enjoy their due rights, and have the right to dissuade, correct, and stop all kinds of Violations of regulations and risky behaviors, and the obligation to conscientiously abide by the safety regulations of this type of work. If it is useful, please give it a good review O（∩_∩）O~~.

5. Can anyone help write a review of the safety accident in the steel plant?

The most precious thing for a person is life, and life is only once for everyone. "

This is a sentence in "How Steel Was Tempered", which is Paul's heartfelt feeling. Yes, everyone has only one life, but many people do not know how to Cherish your own life, not only do you not cherish life, but you also lose your life due to traffic accidents one after another.

Traffic safety is very closely related to us in life, it is like our friend. They stay by our side day and night, educating us and admonishing us. Life is precious, and we only have one life, so we should cherish life.

Paying attention to traffic safety is also to cherish life. Many people think that running a red light, driving under the influence, driving a motorcycle without wearing a helmet, driving a car without fastening a seat belt, talking on the phone while driving, driving while fatigued... Although these are small problems, many traffic accidents are It happened due to these small problems. Last time, when I went shopping with my family, a motorcycle overturned under a large truck. The driver and passengers on the motorcycle were seriously injured, only their heads were injured. Because he was not wearing a helmet, this was a serious car accident, and a large truck ran a red light. Just like that, a serious traffic accident occurred.

Some people think that these accidents occurred because of bad luck that day. Luck, bad luck; some people think that it depends on whether you worship God or Buddha, and pray to God to bless you for peace; some people think that all of this is arranged by God... In fact, these I think they are all wrong and deceptive. The real reason is that people did not consciously abide by the traffic rules and violated the traffic rules. Therefore, this traffic accident was actually caused by people themselves, but I have personally experienced it. Although God is fair, he is also stingy. He only gives people one life and only allows them to have one life. After this time, people will no longer have life. Therefore, we must cherish life. , and the basic thing to cherish life is to pay attention to safety and protect your own safety.

Care for life, pay attention to safety, and make your flower of life more bright and beautiful together.

6. I am a steel mill worker and I urgently need an article about steel mill safety, thank you

Safety is efficiency, safety is politics.

Success is also safe, and failure is also safe. Safety has the most investment, the most emphasis, and the most assessment.

Safety is related to the long-term stability of the company, and it is also related to the vital interests of employees. Party and mass work must strive to achieve "three integrations" and integrate into production. The best carrier is to do a good job in safety work in management.

The Party Committee of the General Steel Plant promotes the construction of safety culture from a political perspective, strictly enforces safety standardization, strengthens the "four no's" concept of safety, and strives to create happiness. Harmonious steelmaking environment

The safety production situation of the steelmaking plant is extremely severe and the task is very arduous.

In order to protect the safety of employees, effectively prevent accidents, and ensure the smooth realization of production and operation tasks throughout the year, the factory vigorously promotes the "four no's" of safety among all employees, that is, "if instructions are given in violation of regulations, they will not be executed; if safety work is not in place, no work will be done" "If safety measures are not implemented, no maintenance will be carried out; if safety is threatened, no production will take place" is the core concept of safety culture.

The awareness of safety production and self-prevention among employees has been further enhanced, safety professional skills and emergency avoidance capabilities have been significantly enhanced, safety standardization work has been steadily advanced, and the safety culture atmosphere of "cherishing life and never forgetting safety" has become increasingly strong. 1. Improving employees’ awareness of self-protection and prevention is the core of implementing the cultural concept of “four no’s” on safety. Human life is the most precious.

The factory adheres to the "Three Stricts" work of "all institutional measures to maintain life safety must be strictly implemented, all safety hazards that may cause accidents must be strictly guarded against, and all violations of safety regulations must be seriously assessed" ideas, and strive to prevent accidents from the source of employees' thoughts. Let the concept of “four no’s” for safety sink into your ears and brains.

Leaders at both levels of the factory insist on instilling the "four no's" concept of safety into employees at dispatch meetings, regular workshop meetings, pre-work team meetings, and regular production meetings, and hang safety slogans at key positions and key hazard sources throughout the factory. , Produce safety posters to publicize and build momentum. At the same time, we collected typical cases of positive and negative aspects of the "Four Safety Don'ts", organized front-line employees to give lectures in workshops and team tours, and educated employees on the "Four Don'ts" of safety through personal experience, and constantly improved the awareness of employees in their positions that self-protection and prevention are better than disaster relief. Security awareness.

Strengthen special safety training. Regularly organize safety "four no" special trainings for workshops, sections, team-level safety officers, team leaders, and Qing'an post leaders, focusing on strengthening the development education of safety skills and safety awareness, and eliminating the employees' "taking shortcuts, trying to save trouble, and fearing" The illegal and adventurous thinking of "taking trouble and hoping for luck".

On the one hand, the company’s department leaders are invited to comprehensively and systematically explain the safety production situation, inspire safety management ideas based on job characteristics, improve safety management capabilities, and establish a working idea of ??“safety first, work second”. On the other hand, professional medical staff are invited to conduct special training on safety knowledge in terms of safety protection, emergency escape, and safety rescue, so as to reduce or avoid the harm caused by safety accidents.

At the same time, grassroots employee representatives are organized to participate in plant safety special meetings and safety inspection activities, participate in the steel plant safety management throughout the process, deepen the understanding and understanding of the steel plant safety culture, and experience and improve in practice-- ----------The article is a bit long and requires your email address.

7. Summary of the work of the steel rolling mill regarding transportation and safety

Issues that need to be paid attention to during transportation: loading must be neat, not over-high or over-wide, and must be bundled to prevent discarding. To prevent accidents such as accidents caused by steel bars penetrating into carriages and injuring people due to emergency brakes, traffic rules must be strictly observed. Pulling and running quickly will increase efficiency without violating traffic conditions.

The more complete and detailed the writing, the better. Of course, this is all done under the leadership of the unit. Other motivations should also be written along with it, especially a few sentences such as years, months, and days. There hasn't been a major accident on a daily basis. To highlight the clear examples, of course, you need to compare them with your peers, and also write down the following: because you have done the above well and made good use of time scientifically, so that the factory's efficiency has increased year after year, it is divided into: human appearance, income, factory appearance , the factory's income, and the factory's development, what it was like in the past, what it is like now, future plans, etc., I won't go into details anymore, but I will write a work summary haha! You can expand and add or write supplements based on the above outline. The organization should be clear, the language should be fluent, etc.! What do you think? .