Regulations on the management of forklift use

In order to standardize the use of forklift trucks in the company's warehouse and ensure the safety of the company's property, the company will formulate a forklift use system. The following are the regulations on the use and management of forklift trucks. Please refer to them.

Article 1

In order to standardize the use of forklifts in workshops and factories, Chapter is formulated. The specific provisions are as follows:

One. person in charge

1. The forklift driver is the first person responsible for driving, maintaining and providing forklift service for the company.

2. The use of forklift must be trained, and the forklift driver must be designated as a special person. Without the consent of the forklift management, no one can drive a forklift except the forklift driver.

3. When the forklift is running, the driver should pay attention and not eat, drink, use mobile phones or carry others.

Second, the forklift driving problems should be paid attention to

1. If the forklift starts abnormally, it shall immediately notify the forklift management department for maintenance, and it is forbidden to dismantle and repair the forklift without authorization.

2. Before the vehicle starts, the brakes, forks and tires of the forklift must be checked to make them in good condition. When the forklift starts, the starting speed should be kept low, and the driver should check whether there are people and obstacles around and pay attention to avoid them.

3. Don't operate up and down while driving, and no one is allowed to get on or off.

4. The forklift should start, turn, drive, brake and stop smoothly, and slow down when turning on wet or smooth roads.

5. Overload and partial load are strictly prohibited during operation.

6. It is forbidden to lift goods when driving for a long distance.

7. It is forbidden to use the method of braking inertia to unload, and it is forbidden to use inertia to load and unload.

8. It is forbidden to stand or carry people on the forklift.

9. It is forbidden to carry unfixed or loosely stacked goods.

10. No one is allowed to stand under the fork during forklift operation. When the forklift lifts the goods, no one is allowed within the radius of 1M centered on the forklift.

1 1. When the forklift driver damages the goods and facilities, or finds the damaged goods and facilities, he shall truthfully report it to the person in charge of the forklift.

12. It is forbidden to hang goods after parking.

13. Forklifts should not be parked at emergency exits, safety exits and fire control facilities.

14 The diesel engine and the key must be turned off when the forklift is refueling. It is forbidden to carry fire or static sources. After adding engine oil, the tools containing engine oil should be sealed and put back in place. It is strictly forbidden to misplace related tools at will.

Third, maintenance

1. If the forklift is abnormal, stop it immediately and notify the forklift management department for inspection in time.

2. It is forbidden to carry out maintenance when the forklift is started. It is strictly forbidden to repair forklift trucks and disassemble parts without authorization. Carry out regular maintenance in strict accordance with forklift manufacturer's "forklift maintenance manual".

Draft: review: approval:

the second

1, special purpose.

2, who use who manage, who maintain, who follow up the maintenance.

3, forklift driver related certificates, it is forbidden to drive a forklift.

4, it is forbidden to carry other personnel except the driver.

5, according to the provisions of the line, indoor turning should be slow, outdoor speed should be controlled within the prescribed range of15 km/h. ..

6. When driving, the horizontal distance between the bottom of the fork or pallet and the ground should be controlled at the specified height of 25 cm-35 cm; Forklift fork adjustment is prohibited while driving; If it is really necessary to adjust under special circumstances, stop the car first and then adjust.

7, forklift loading and unloading, handling goods, must keep the line of sight unobstructed; You can retreat if necessary.

8. When driving, pay attention to the speed and direction. Pay attention to the horn to avoid damaging the equipment and personnel.

9, in and out of the warehouse, should be fixed fork height, so as not to collide with the warehouse door.

10, when working, someone should command to ensure safety.

1 1. Take effective measures to prevent and avoid safety accidents.

12, after use, park in the designated location.

13, check on time before going to work every day, and record the checklist; Maintenance once a week; Professional maintenance companies maintain it every two months.

14. When hiring external personnel for repair and maintenance, the forklift driver should follow up and supervise the whole process.

rear-service department

Article

In order to standardize the use of forklift trucks in the workshop, relevant chapters are specially formulated. Details are as follows:

One. person in charge

The forklift owner is the forklift driver in the workshop and belongs to the workshop for management.

Second, responsibility.

1, abide by the company's rules and regulations and relevant regulations.

2. Obey the workshop management and complete the daily tasks and plans arranged by the monitor with good quality and quantity.

3. Keep the vehicle clean and complete, regularly check its safety accessories and efficiency, and carry out repairs and maintenance according to regulations.

4. It is forbidden to drink and drive.

Third, use management.

1. Overloading, speeding and manned vehicles are strictly prohibited, and people other than drivers are prohibited from using vehicles at will. If the forklift driver can't go to work normally for some reason, the shift leader and the dispatcher can temporarily make up the position;

2. It is forbidden for vehicles to stop, slam on the brakes, turn sharply and drive at a speed limit during operation;

3. Check the braking condition before the vehicle starts to work. During the operation, the forklift should be parked at the designated location. It is forbidden to park vehicles at will on the production line.

4. Adjust the height of the forklift arm during driving to avoid scratching the ground.

Fourth, punishment.

1, drivers and personnel will compensate for the loss according to the original price of the company's materials if they cross the defective materials during the operation.

2. During the operation, he disobeyed the workshop command, and was fined 50 yuan for the first time and given a warning after verification; Give double punishment for the second time.

3. For speeding in the workshop, 50 yuan was punished for the first time and warned and criticized; Give double punishment for the second time;

4. If the driver damages the appendages and public property during the operation, he shall be fined according to the circumstances or compensated according to the original price of the property.

5. During working hours, it is forbidden for drivers to sleep off duty. Found a fine 50 yuan and warned criticism; Give double punishment for the second time;

6. After the work, the forklift should be parked at the designated position and the forklift arm should be lowered to the ground level. If it violates the regulations, it will punish 50 yuan/time;

7. Those who drink alcohol during work or go to work after drinking alcohol will be fined 100 yuan/time;

8. Forklift drivers are strictly forbidden to carry people during the operation, and those who violate the rules will be punished by 50 yuan/time;

9. Forklift drivers who fail to take the keys after work or hand over the forklift to workshop operators will be fined 65.438 million yuan/time;

10. It is forbidden to destroy all signs and lines in the workshop. After refueling, it is necessary to check whether there is oil leakage. In the forklift operation industry, the forklift arm must be lifted to a suitable height to avoid scratching the ground. If it violates the regulations, it will be fined 100 yuan/time;

Preparation, review and approval:

manufacturer

20xx165438+1October 6th