How to repair the belt of washing machine

The belt of the washing machine is an important part of the washing machine, which is responsible for transmitting the power of the motor to the drum, driving the drum to rotate and completing washing and other tasks. However, after long-term use, the belt will wear and break, thus affecting the use effect of the washing machine. When there is a problem with the belt, it needs to be repaired in time. Here are several ways to repair the belt of washing machine.

Method 1: Replace the belt.

If the belt is broken or seriously worn, the best solution is to replace the belt. First, you need to buy a suitable belt, then remove the shell and drum of the washing machine, find the original belt and remove it. Then fix the new belt on the motor and drum and install it back to the original position.

Method 2: Adjust the belt tension

If the belt is not seriously damaged but loose, the belt tension can be adjusted. First, you need to find the adjusting shaft at the bottom of the motor, loosen the fastening screw, then adjust the nut on the shaft according to the actual situation to make the belt tension moderate, and finally tighten the screw again.

Method 3: Lubricate the belt

If the belt has the problem of making sharp noise, please consider lubricating the belt. First, you need to turn off the power of the washing machine, disassemble it, find the belt on the drum and motor, spray lubricant on the belt, and then reinstall it.

In a word, the method of repairing the washing machine belt can be determined according to the specific situation, and it is necessary to pay attention to safety and follow the correct operating instructions. If you can't complete the maintenance, you can seek professional maintenance services.