Safe and civilized construction management regulations?

1 Scope These regulations apply to the construction site safety and civilized construction management of the general contracting construction project (hereinafter referred to as the construction project) of the Northeast Branch of China Petroleum Corporation Engineering Design Co., Ltd. (hereinafter referred to as the general contractor) . 2 General Principles 2.1 In order to implement the relevant laws, regulations and management measures of the country and industry, these regulations are specially formulated. 2.2 The purpose of formulating these regulations is to protect the life safety of construction workers and property from loss, improve the construction working environment to ensure the health of construction workers, eliminate interference from the external environment to ensure the smooth progress of construction, and improve the management level of modern construction at the general contracting construction site of the branch. . 3 Management content and requirements 3.1 Construction safety management adheres to the policy of safety first and prevention first. 3.1.1 Construction safety management of the general contractor 3.1.1.1 The general contractor must establish and improve the construction safety management system (including safety responsibilities, safety education, safety measures, safety supervision, accident handling, etc.) and conscientiously implement it. 3.1.1.2 During the construction process of general contracting construction projects, construction and construction must be organized and these regulations must be implemented based on the principle of ensuring safe production for reconstruction, expansion and new construction projects. 3.1.1.3 The general contractor must establish and improve the safety assurance system and implement the responsibility system. 3.1.1.4 The general contractor shall complete the safety contract and be responsible for signing the "Safety Contract Contract" with the subcontractor, which shall be reviewed and signed by the general contracting department. 3.1.1.5 When reviewing the qualifications of subcontractors, the general contractor must also review whether the subcontractor's safety assurance system is sound and whether management is in place. As a necessary condition for signing a construction contract and handling project access procedures. 3.1.1.6 The general contractor shall inspect the implementation of the safety rules and regulations of the subcontractors during the construction period. At the end of the construction, the general contractor shall inspect the subcontractors' implementation of the "Safety Contracting Contract" and summarize the inspection results and report them to the general contracting department for record. , as the basis for the safety management assessment of subcontractors. 3.1.1.7 The general contractor is responsible for organizing safety education for all construction personnel before entering the factory, enhancing the safety awareness of construction personnel, strictly implementing safety operating procedures, and ensuring the time and quality of education. 3.1.1.8 The general contractor must strictly review the relevant contents of safety management in the subcontractor's construction plan, and construction safety measures must comply with relevant safety regulations and standards. 3.1.1.9 When concluding a contract for an engineering construction project, the general contractor must clarify the construction safety content, clarify the safety responsibilities of Party A and Party B, and require compliance with relevant safety requirements. 3.1.1.10 The general contractor shall conduct regular inspections on the safety management of the construction site. If safety problems are found, it shall issue a rectification notice of potential safety hazards at any time, and oblige the sub-contractors to make rectifications within a time limit and eliminate unsafe factors in a timely manner. Units that fail to make rectifications on schedule have the right to require them to stop work for rectification, and the responsible party will be responsible for any economic losses caused thereby. For units that fail to make rectifications three times in a row with the same content of rectification notices, after the responsibilities are clarified, the general contractor has the right to terminate the project construction contract or impose penalties on the responsible unit. 3.1.1.11 The general contractor must participate in the review of safety construction plans for high, difficult and dangerous construction content. 3.1.1.12 The general contractor is responsible for publicizing and distributing the company's current safety management regulations, rules, systems, standards, etc. to subcontractors. 3.1.1.13 In the event of a major safety accident, the construction unit must report it to the company management department in a timely manner. 3.1.1.14 The frequency of major accidents in construction projects is controlled within 0.08 per million working hours. 3.1.2 Construction safety management of subcontractors 3.1.2.1 Subcontractors must establish and improve construction safety management systems (including safety responsibilities, safety education, safety measures, safety supervision, accident handling, etc.) and conscientiously implement them. 3.1.2.2 The subcontractor must have a complete safety assurance system (from the unit safety organization to the team safety officer). The safety assurance system serves as a necessary attachment for the subcontractor to sign the construction contract and apply for the project access permit. 3.1.2.3 The subcontractor must hold a valid "Safety Qualification Certificate" issued by the local labor department. This certificate is a necessary attachment for the subcontractor to sign the construction contract and apply for the project access permit. 3.1.2.4 All construction personnel of the subcontractor must pass the safety examination for each type of work that year before they can start working. 3.1.2.5 All personnel of the subcontractor must abide by the various rules and regulations of the general contractor and the construction unit where they work, as well as various laws and regulations promulgated by the state, and must accept the safety supervision of the general contractor, construction unit, and supervision unit.

3.1.2.6 The subcontractor must unconditionally obey the safety hazard rectification notices issued by the general contractor, construction unit and supervision unit and make rectifications on time. 3.1.2.7 The subcontractor must formulate individual construction plans for complex construction and dangerous construction of individual projects, and safety measures must be specific and implemented. Technical briefings and safety briefings must be conducted before construction operations, so that every operator knows the dangerous factors and specific preventive measures during the operation. 3.1.2.8 All construction machinery and electrical equipment of the subcontractor must be in good safety condition and must have complete safety operating procedures. In particular, large lifting equipment, hoisting equipment, pressure vessels, etc. must comply with national requirements and pass regular inspections by the local labor department before they can be put into use after obtaining a certificate of conformity. 3.1.3 Construction safety management at the construction site 3.1.3.1 Labor protection equipment must be worn when entering the site, and protective equipment must be worn according to work needs. 3.1.3.2 Safety warnings and slogans should be hung at conspicuous places at the construction site to enhance employees' safety awareness, and safety responsibility lists should be hung at the district level. 3.1.3.3 Employees’ working hours and work shifts must comply with the provisions of the country’s Labor Law to ensure reasonable arrangements for construction periods and not to extend work hours indefinitely to prevent accidents caused by over-fatigue. 3.1.3.4 During construction, the ground breaking permit, fire permit, fire use permit, temporary electricity use permit, high-altitude operation permit, tank entry (shaft, trench, trench) operation permit, electrician work ticket, safety permit should be obtained as needed. Construction task sheets, safety maintenance task sheets, safety construction plans, etc. Various tickets, certificates, and books must be filled out and signed as required, and must be carried with them during work for inspection. 3.1.3.5 The safe operation certificate and the special type of work operation certificate are qualification certificates for on-the-job work and must be carried with you. 3.1.3.6 The construction working environment must be maintained in good condition, safety passages must be clear, tools and spare parts must be neatly placed, and necessary safety protection measures such as guardrails, covers, and safety warning signs must be in place. 3.1.3.7 Tools and instruments during construction operations must be correctly selected in accordance with relevant operating procedures and regulations, especially special operations such as lifting operations, climbing operations, electrical operations, and welding (cutting). Tools and instruments must be carefully inspected and confirmed before use. Use that does not comply with safety regulations is prohibited. 3.1.3.8 Warning lines must be set up for radiographic inspection work at the construction site, and special personnel must be provided to monitor the work. 3.1.3.9 When various vehicles of the subcontractor enter the construction site, they must strictly abide by the safety regulations of the construction unit and undergo safety inspections. 3.1.3.10 Construction personnel must work within the designated scope and are not allowed to go to the production area outside the construction area. They are not allowed to dismantle, modify or damage all equipment, facilities and items of the construction unit without permission. 3.1.3.11 Construction workers are prohibited from drinking before or during work. 3.1.3.12 No playing or playing at the construction site. 3.1.3.13 No unrelated personnel are allowed to enter the construction site. 3.2 Civilized construction management 3.2.1 The subcontractor shall set up various temporary facilities in accordance with the general construction layout plan, stack bulk materials, finished products, semi-finished products, machinery and equipment, and shall not encroach on on-site roads and safety protection facilities. 3.2.2 Obvious signs must be set up at the construction site to indicate the name of the project, construction unit, general contractor, design unit, subcontractor, project manager and general representative of the construction site, start and completion dates, and construction license approval. Document number, etc. The subcontractor is responsible for the protection of signage at the construction site. 3.2.3 The materials stacked by the subcontractor must be classified and neatly placed, and the material names, materials, and specifications must be labeled at the site where the materials are placed to prevent the misuse of materials during construction and to facilitate on-site management, inspection, and use of materials. . 3.2.4 Construction workers at the construction site must dress uniformly. 3.2.5 All personnel at the construction site should wear badges proving their identity. 3.2.6 During the construction period, the subcontractor must ensure that the site is cleared of materials after completion. 3.2.7 The subcontractor should ensure that the roads at the construction site are clear, the drainage system is in good condition, and the site appearance is kept clean. Construction waste and domestic waste should be classified and stacked and cleaned at any time. Construction should be carried out in areas where vehicles and pedestrians pass. Trench wells, ridges, cave covers and construction signs should be set up. 3.2.8 The construction site should be equipped with various necessary living facilities for employees, and meet the requirements for hygiene, ventilation, lighting, etc. The meals and drinking water supplies for employees should meet the hygiene requirements.

3.2.9 The subcontractor shall ensure the security of the construction site, take necessary anti-theft measures, and set up containment facilities around the site. Non-construction personnel shall not enter the construction site without authorization. 3.2.10 The subcontractor shall abide by national laws and regulations on environmental protection and take measures to control the environmental pollution and harm caused by various dust, waste gas, waste water, solid waste, noise and vibration at the construction site. 4 Inspection and Assessment 4.1 The safety management personnel of the sub-contractor must frequently inspect the construction site, form self-inspection reports regularly, and submit the self-inspection reports to the general contractor. For sub-contractors who do not form self-inspection reports on time, the general contractor shall A fine of 5,000 yuan was imposed on the subcontractor. 4.2 If any economic losses are caused to the general contractor and the construction unit due to illegal operations by subcontractors, the subcontractor shall compensate the general contractor and the construction unit for all losses. 4.3 The general contractor should conduct regular on-site safety and civilized construction supervision and inspections at the construction site of the construction project it manages, and educate and punish subcontractors with problems in accordance with relevant documents. 4.4 The general contracting project department is responsible for regularly summarizing the inspection status of the construction project construction site and the handling and rectification of existing problems to form a self-inspection report and submit it to the general contracting division. 4.5 The general contracting project department is responsible for inspecting the self-inspection reports submitted by the subcontractors, and uses the inspection results as a basis for the assessment of the subcontractors' implementation of on-site safety and civilized construction management regulations of the construction project. 4.6 The General Contracting Division regularly conducts comprehensive inspections on on-site safety and civilized construction of construction projects. In addition to punishing sub-contractors in accordance with regulations if problems are found, the general contracting site managers must also be held accountable.

For more information about engineering/service/purchasing tender document writing and production to improve the bid winning rate, you can click on the official website customer service at the bottom for free consultation: /#/?source=bdzd