Requesting chemical workshop safety slogans

Chemical companies have "14 inaccuracies" to ensure production safety.

Strengthen the management of open flames, and no smoking is allowed in the factory area

According to the fire and explosion prevention characteristics of chemical enterprises, the use of open flames must be strictly controlled and managed. For fire work, fire procedures must be followed and reliable safety measures must be taken. In addition, smoking is not allowed inside the factory.

Minors are not allowed to enter the production area

The chemical production area is a place where toxic and harmful substances are densely packed. To enter, you must be familiar with the relevant safety systems, production operations, equipment and environment. Minors are not allowed to enter the production area.

You are not allowed to do anything unrelated to production during working hours

Only by concentrating at work can you grasp the responsibilities of your job and pay attention to equipment operation, process material balance and differences between upper and lower processes at all times. conditions to ensure safe production. Doing things that have nothing to do with production, such as reading magazines and chatting at work during working hours, can cause accidents.

Drinking is not allowed before or during class

Drinking can make people confused and lose their ability to process instructions correctly, which may lead to accidents.

It is not allowed to use gasoline and other flammable liquids to scrub equipment, utensils and clothing

Due to their strong decontamination ability, gasoline and other highly volatile flammable liquids have long been used for cleaning. However, this often causes fires, explosions and other accidents due to improper use, so it is prohibited to use gasoline to clean equipment, clothing and utensils.

Those who do not wear labor protective equipment in accordance with regulations are not allowed to enter production positions

Wearing protective equipment in accordance with regulations is the second line of defense for safe production, ensuring personal safety and preventing injuries. .

Equipment and tools without complete safety devices are not allowed to be used

Protective safety devices, signal safety devices, insurance safety devices, interlocking safety devices, etc. are necessary to ensure normal production and prevent personal, Indispensable device in case of operation and equipment accidents. Not only must it be complete and effective to ensure sensitivity and reliability, but it must also be inspected regularly according to the system.

Do not use equipment and tools that are not in your own charge

Professional skills are required to operate production equipment and tools. There are also many people who use equipment or tools without understanding their performance, or who use equipment they are familiar with because they are not on duty and do not understand the working status, and accidents occur.

If safety measures are not implemented when inspecting equipment, inspection is not allowed to begin

Chemical production equipment is different from general equipment. Before inspection, the insulation filler needs to be removed and isolated from the production system before the equipment can be cleaned and replaced. internal chemicals. If various work tickets such as maintenance work permits, power outage contact sheets, etc. are not handled as required, accidents may occur.

Equipment after shutdown is not allowed to be used without thorough inspection

Chemical production equipment is all interconnected. After shutdown, the internal conditions often change abnormally and safety measures are not implemented. Very prone to accidents. Therefore, a comprehensive inspection must be carried out according to the driving procedures, and the driving can only be started after confirmation.

Without a high-altitude work permit, without safety belts, and with weak scaffolding and springboards, you are not allowed to work at heights

Our country stipulates that work above 2m above the ground is generally classified as high-altitude work, so fasten your safety The belt can protect the operator's life in the event of a fall. Scaffolding and springboards are the primary requirements for climbing operations.

No work is allowed unless the springboard is fixed on the asbestos tiles

Asbestos tiles are a lightweight building material that cannot bear load and can only be used for pressure relief roofs in off-site buildings and explosion-proof factories. build. Therefore, when working on asbestos tiles, a springboard must be fixed to prevent falling accidents.

Mobile power tools without an electric shock safety device are not allowed to be used

Mobile power tools are widely used and are prone to leakage. The electric shock safety device is a protective instrument to prevent electric leakage and electric shock. If there is an electric leakage or electric shock accident in the system, it can immediately send out an alarm signal and quickly cut off the power supply to protect personal safety.

Employees who have not obtained a safe work certificate are not allowed to work independently

Special types of work are not allowed to work without obtaining a certificate. It is illegal to operate without a license.