Talking about the safety operation rules of slipform workers?

Slipform workers must meet certain safety standards when working. Today, we will learn the safe operation procedures of slipform workers.

1 The hanging cage loaded with personnel and materials must be equipped with reliable rope-breaking safety fixture and the travel switch of the hanging cage to ensure accurate parking. Hanging cages for passengers should have double safety devices, and safety effect test and acceptance must be carried out before use. Ensure that all kinds of safety devices are sensitive and reliable, and deal with problems timely and effectively.

2 The hoist for hoisting the cage must be equipped with a limit switch when the cage is in the highest and lowest position, and the electromagnetic brake should work reliably.

3. Reliable dialogue and communication devices should be installed in the hoist room and the upper and lower parts of the construction platform, and the signals should be unified with the hoist room to ensure the safe operation of the hoisting cage.

4 Slipform construction platform and hanger planking must be laid flat and tight, fences should be installed reliably (including the upper and lower construction platforms and around the feed inlet), and closed with safety nets.

5. In case of sudden temperature change, strong wind or heavy rain, the slipform construction shall be stopped immediately and emergency preparations shall be made.

6 Fire fighting and lightning protection facilities should be set on the sliding platform, and grounding devices should be set on the power equipment. Smoking is strictly prohibited on the platform.

7 Demolition of high-altitude slipform platform, especially the slipform platform without derrick, must be carried out under unified command.

8 There should be protective railings and safety nets around the sliding mode machine and the operating platform, and there should be no gaps when laying the platform plate. Fences must be set below the construction area, and protective sheds must be erected for frequent traffic.

9 prepare flashlights for construction at night to prevent power failure. Vertical transportation system should be responsible by designated personnel.

On the 10 operating platform, many people are not allowed to gather in one place, and the materials and machines should be cleaned up during the shift change.

1 1 formwork, operating platform, derrick, gantry, etc. It should be demolished in a planned and measured way. Templates, machines, equipment, etc. It should be removed by winch and not thrown.

12 there must be a warning zone and obvious signs in the construction demolition area, and the demolition work should be supervised by special personnel.

I believe that after the above introduction, everyone has a certain understanding of the safety operation procedures of slipform workers. Welcome to Zhong Da for more information.

For more information about project/service/procurement bidding, and to improve the winning rate, please click on the bottom of official website Customer Service for free consultation:/#/? source=bdzd