Safety production management system for commercial concrete mixing stations?

In order to strengthen production safety management, prevent production safety accidents, ensure the safety of employees’ lives and company property, and promote the safe and efficient operation of the company’s production and operations. We must adhere to the safety production management policy of "safety first, prevention first". All departments and production teams should take accident prevention as the focus and foothold of safety production management, and strictly implement the national "Safety Production Law" and "Road Safety Law". We must comply with the Traffic Safety Law and related laws, regulations, and the company's various rules and regulations and operating procedures, and conscientiously ensure safe production.

1. Safety Production Management Organization

1.1 The company has established a safety production management committee with the general manager as the director and the deputy general manager as the deputy director. Its members include department managers, major Production team leader.

1.2 The company's safety committee has an office. The team captain also serves as the director of the safety committee office and the company's safety officer, responsible for the company's daily safety production management.

1.3 The company has established a safety production management network with the safety committee as the center and involving all employees. Each of them shall perform their duties, conscientiously exercise their respective rights and obligations, implement the safety production responsibility system, and standardize the operating behavior of employees. , to ensure production safety.

2. Safety education and training

2.1 All employees must establish a high degree of safety awareness and fully understand the importance of safe production to the country, the enterprise and individual employees, and relevant departments must conscientiously do so Carry out safety education and training well,

2.2 Provide regular safety education and safety knowledge training to employees.

2.3 Newly recruited employees must receive education and training from the company's administrative department and the production safety management department before taking up their posts, so that they can basically master the relevant safety production rules and operating procedures, and master the safe operating procedures for their positions. and basic skills.

2.4 All departments and production teams must carry out safety activities regularly, no less than three times a month, to continuously enhance employees’ safety awareness, improve safety production skills, and enhance accident prevention and emergency response capabilities.

2.5 The safety education, training and safety activities of each department and team must be effectively implemented, and complete safety activity records must be established. Safety activity records must include activity content, time, organizers, and participants. Participants must sign on the activity records for confirmation.

3. Safety production management responsibilities

3.1 Safety production management responsibilities of the general manager (deputy general manager):

3.1.1 Conscientiously implement the national "Safety Production" Act" and relevant laws and regulations, strengthen the leadership of safety production management, and be fully responsible for the company's safety production.

3.1.2 Organize and formulate the company's production safety management system, equipment safety operating procedures and other safety production management systems, and issue and implement them.

3.1.3 According to the company’s production safety management needs, equipped with qualified full-time or part-time production safety management personnel. Conduct regular or irregular inspections or spot checks on production safety management work and work sites.

3.1.4 Take effective measures to improve the working conditions of employees and ensure the timely supply of materials, equipment, instruments and labor protection supplies required for safe production.

3.1.5 Organize and formulate education and training plans for employees on production safety knowledge and skills and urge relevant departments to implement them.

3.1.6 Organize and formulate accident prevention measures and emergency plans, conduct regular drills, check the implementation of accident prevention measures, and eliminate accident hazards in a timely manner.

3.1.7 Host a monthly safety production analysis meeting to summarize experiences and lessons, find out unfavorable factors and accident hazards in safety production, formulate measures to overcome safety hazards, eliminate accident hazards, and ensure safe production.

3.1.8 Take charge of the handling of serious and extremely serious accidents, and report accidents to the competent government departments in a timely manner. 3.2 Responsibilities of the department manager (director) in safety production management

3.2.1 Earnestly implement the national "Safety Production Law" and relevant laws and regulations and public safety management systems. Under the general manager (deputy general manager) ), conscientiously do a good job in the safety management of the department and be fully responsible for the safety production of the department.

3.2.2 Based on the actual production safety of the department, in accordance with the provisions of national laws and regulations and the company's production safety management system, formulate the safety production responsibility system of the department and submit it to the general manager for review and approval before implementation.

3.2.3 Conduct regular safety education for department employees, organize and study the national "Safety Production Law" and related laws and regulations, learn the company's safety management system and operating procedures, and enhance employees' safety awareness and Ability to prevent accidents. Organize learning and carry out safety activities no less than three times a month, and educational activities must have content and records.

3.2.4 Regularly organize part-time safety officers of the department to inspect the implementation of the safety production management system of each team and production site in the department, whether there are any violations and accident hazards, and promptly discover problems and correct and eliminate them . Security inspections and hazard source inspections are conducted once a week and are recorded.

3.2.5 Have the right to stop all violations and organize the elimination of hidden dangers of accidents. Propose handling suggestions (criticism, education, financial penalties) to those responsible for violations and accident hazards, and submit them to the general manager for approval before implementation.

3.2.6 Regularly inspect, maintain and repair the production and living equipment, facilities and protective devices used by the department to ensure their safety. The authority has the right to put forward suggestions for improvements to the protective devices used in the storage and use of equipment in the department, and report them in writing to the general manager or the deputy general manager in charge, and proceed with construction after approval.

3.3 Responsibilities of the company’s part-time safety officer

3.3.1 Seriously study and follow the national guidelines, policies and relevant laws and regulations on production safety, educate employees to abide by the law and strictly implement them The company's production safety system and safety operating procedures. Based on the actual situation of concrete production, transportation and pumping of the company, we will revise and improve the safety production management system, operating procedures and other rules and regulations, and submit them to the general manager for review and implementation after approval.

3.3.2 Supervise the implementation of safety production management systems, safety operating procedures and other rules and regulations, check the operation status of equipment, the implementation of equipment safety protection devices and safety production measures, and urge rectification of identified problems , report major equipment defects and accident hazards discovered to company leaders in a timely manner, and take measures to rectify and eliminate them.

3.3.3 Frequently go to the production and construction site to check the operation status of equipment and the safe operation status of employees. Have the right to stop illegal commands and illegal operations, put forward handling suggestions for violators, notify relevant departments, and report to company leaders for approval and implementation.

3.3.4 Organize and guide part-time safety officers of various departments and teams to manage and inspect production safety work. Establish and improve safety production management materials and records, and conduct assessments on the safety production work of various departments.

3.3.5 Participate in accident investigation and handling, carefully analyze the causes of accidents, identify weak links and tendentious issues in safety production management, report to supervisors, and take measures to correct them.

3.3.6 Put forward suggestions for rewarding and commending those who have made outstanding contributions to safety production, and recommend those responsible for accidents, those responsible for violating safety production rules and regulations, and those with relevant leadership responsibilities according to the severity of the circumstances. Handle comments.

3.4 Responsibilities of part-time safety officers in each department and team

3.4.1 Responsible for safety education of employees in the department and team, organizing safety activities, establishing and improving safety activity materials and records, Give full play to the role of part-time safety officers in departments and teams to ensure safe production in their own departments and teams. Safety inspections are conducted daily and safety activities are conducted weekly.

3.4.2 Responsible for the daily safety production and on-site management of the department and team; inspect and correct violations, take the lead in strictly implementing the safety production system and safe operating procedures, and have the right to refuse violations of safety rules and safe operating procedures instructions.

3.4.3 Personnel who have contributed to the safety production of the department and team have the right to recommend commendations and rewards, and to propose handling suggestions for those responsible for violations or accidents, and submit them to the department manager or the safety committee office .

4. Safety production responsibilities for positions and types of work

4.1 Safety production responsibilities of mixing station operators

4.1.1 Operators must establish "safety first, The idea of ??"prevention first". Strictly abide by the company's production safety management system and operating procedures, enhance production safety awareness, and achieve safe production.

4.1.2 Before each start-up, the condition of the equipment must be carefully checked. Check whether there are people or debris in the main machine, belt conveyor and discharging area. The equipment can only be started when there is no one, and inspection records must be kept. . In winter, start the operation and wait for 10 minutes to warm up.

4.1.3 If there is an abnormality in the equipment during the shift, promptly notify the maintenance personnel to check, eliminate the abnormality, and keep records.

When handing over the shift, the operating status of the equipment, existing problems and matters that should be paid attention to must be explained to the successor. The handover record must be signed and confirmed by both the handover and successor parties before they can leave their posts.

4.1.4 When mechanics or auxiliary workers inspect and clean the mixing system equipment, they must first cut off the main power supply. The operator and the mechanic or auxiliary worker both confirm the power outage, sign on the record sheet, and hand over the key to the power distribution cabinet to the main engine maintenance and cleaning person for safekeeping. And place a warning sign on the operating table before entering the machine for maintenance or cleaning.

4.1.5 After the mechanics and auxiliary workers complete the inspection and cleaning, the operator must check and accept, confirm that there is no one in the machine or any debris left behind, start the trial operation of the equipment, and if there is no abnormality, both parties will record the maintenance Sign the form to confirm.

4.1.6 The operating room is an important area for equipment operation and control. Unrelated personnel are prohibited from entering without permission.

For more information about engineering/service/purchasing tender document writing and production to improve the bid winning rate, you can click on the official website customer service at the bottom for free consultation: /#/?source=bdzd