How to remove the one-way sticker?

One-way paste

"Sun-shading perforated single-sided penetration" is made of black and white PVC.

sheet metal

The effect of bonding pressure sensitive adhesive and release paper is very good.

Advertising materials

, suitable for posting windows, glass doors and windows,

glass curtain wall

Or the glass surface of the vehicle, which not only has the purpose of shielding the sun, but also has the effect of advertising.

1

art knife

Draw a long knife every 10 cm, then scrape a head from the single transparent end with the knife and slowly tear it parallel to the glass by hand. You can't lift your hand, and it's easy to tear if you lift it. This is very important.

2. If it can't be torn off, use it.

scraper knife

Or art knife, shovel or scrape with a knife at an angle of 30 degrees. However, this method is only used when other methods are unsuccessful, because it is relatively inefficient. At the same time, this is the only way to solve the problem of difficult tearing.

There is more or less some glue on the glass after tearing. Prepare some.

solvent naphtha

, or

deceiving and flattering words

、

xylene

(These paint shops can sell them), then dip a cotton towel in some rosin water, or banana oil and xylene, and then dip a cotton cloth in these rosin water, or banana oil and xylene, and you can easily remove the glue and wipe it off.

Note: Among these three chemical products, xylene and banana oil have the strongest degumming ability for glass. At the same time, these three chemical products are toxic and should be protected during operation.

rubber gloves

Do not touch rosin water, banana oil and xylene, especially banana oil and xylene. Don't touch your eyes,

Just in case.

Rinse eyes with clear water immediately, and then go to the hospital for treatment immediately. At the same time, these chemical products are flammable and should be kept away from kindling.