What are the potential safety hazards in the foaming workshop? What kind of protection measures are there? Do you have any better suggestions?

All kinds of foaming main and auxiliary materials shall not be placed at will, and special personnel shall be appointed for management and regular inspection;

1, fire extinguishers and other fire-fighting equipment equipped in the production workshop should be kept in good condition, and all personnel will use fire-fighting equipment correctly; 2. Cables used in the workshop shall not be immersed in water or used where there is water, and shall be checked for leakage at any time, and must be operated after moving or cutting off the wiring;

3. When there is water or humidity at hand, it is forbidden to pull the power control switch, plug and unplug power supply equipment and electrical facilities such as power sockets and cabinets;

4. Before coming off work every day, relevant electrical equipment in the work area must be turned off and cut off as required, and doors and windows should be closed and locked to avoid damage to electrical equipment due to rain, snow or humidity.

5. Conduct regular safety, fire prevention and anti-theft inspections on the workshop work area and site, especially on holidays, so as to eliminate potential safety hazards.