Correct opening method of toilet water tank

The toilet flush tank is one of the important parts of the toilet, and the correct use and maintenance of the toilet flush tank plays an important role in keeping the toilet clean and hygienic. The following is the correct way to open the toilet flush tank:

The first step is to determine whether the amount of water in the flushing tank is appropriate. Insufficient water in the flushing water tank will lead to poor flushing effect, while too much water will waste water resources. Generally, the water in the flushing water tank should be higher than the water level of the flushing water tank, but it should not exceed the capacity of the water tank.

Step 2, operate correctly according to the position and usage of the flush button. Usually, the flush button is located above the toilet tank and can be a button or a pull rod. Press the button or push the pull rod to open the flush gate in the water tank and let the water flow into the drain pipe of the bathroom.

The third step is to observe the washing effect. Flushing should be smooth and even, and stains in the toilet should be removed. If it is found that the flushing is not smooth or sufficient, you can appropriately increase the amount of water or check whether the toilet is blocked.

Step 4, turn off the flusher in time. The washing time should not be too long. Usually, it takes 5- 10 seconds to complete flushing. Too long washing time will waste water resources and cause environmental pollution.

Step five, get into the habit of cleaning the flushing tank regularly. Regular cleaning and flushing of the water tank to remove scale and dirt can ensure clean water quality and prolong the service life of the water tank.

It should be noted that fake and inferior flushers will affect normal use and even bring more problems to toilets. Therefore, when purchasing and installing, we must choose reliable brands and channels and ask professionals to install them.