What glue should I use to install the washbasin?

What glue should I use to install the washbasin?

As we all know, not only the living room and bedroom at home should be beautifully decorated, but also the bathroom. However, the bathroom is always a damp and dark place, so avoid falling, and there is no glue when it falls. Let's share what glue is used to install the washbasin.

What glue should I use to install the washbasin? 1 1, the washbasin glue should be neutral.

2. Glass glue used for decoration is mostly glue, silicone glue is divided into acid glue and neutral glue, and neutral glue includes structural glue, sealant and weather-resistant glue.

3. The ceramic washbasin is bonded with neutral glass glue, which not only has strong bonding ability and convenient replacement, but also has good waterproof and mildew-proof sealing performance.

Neutral glass glue.

The ceramic washbasin is bonded with neutral glass glue, which not only has strong bonding ability and convenient replacement, but also has good waterproof and mildew-proof sealing performance.

Glass glue used for decoration is mostly silicone glue, which is divided into acid glue and neutral glue. Neutral glue includes structural glue, sealant and weather-resistant glue.

Neutral glue overcomes the characteristics that acidic glue corrodes metal materials and reacts with alkaline materials, so it has a wider application range and its market price is slightly higher than that of acidic glue.

A special kind of neutral glass glue on the market is silicone structural sealant. Because the metal directly used for glass curtain wall is bonded with glass structure or non-structure, its quality requirements and product grade are the highest among glass adhesives, and its market price is also the highest.

Extended data:

The curing time of glass glue increases with the increase of bonding thickness. For example, an acidic glass glue with a thickness of12mm may take 3-4 days to cure, but within about 24 hours, a 3mm outer layer has cured. When glass, metal or most wood are bonded, the peel strength is 20 lbs/inch after 72 hours at room temperature.

If the place where the glass glue is used is partially or completely closed, then the curing time is determined by the tightness of the seal. In an absolutely closed place, it may never be cured.

If the temperature rises, the glass glue will soften. The gap between metal-to-metal bonding surfaces should not exceed 25mm. In all kinds of bonding occasions, including closed conditions, before using bonding equipment, it is necessary to comprehensively check the bonding effect. During the curing process of acidic glass glue, there will be an odor due to the volatilization of acetic acid, which will disappear during the curing process and there will be no odor after curing.

What glue is used to install the washbasin? 2. What glue is used for water leakage in washbasin?

Generally speaking, neutral glass can be used for bonding, but it still depends on the material type of the sink.

2, neutral glass glue can be directly used to paste ceramic sinks, and has strong adhesion, waterproof and mildew-proof, and good sealing performance.

3. If it is a marble washstand, it must be bonded with marble glue or structural glue.

2. What are the selection methods of washbasin?

1, washbasin material

There are many kinds of washbasin materials on the market, and different materials have different decorative effects and sense of use. Everyone should choose according to their own preferences, but be sure to pay attention to safety when buying.

2, wash basin size

To know the area and layout of the bathroom, but also exclude the space occupied by the washing machine, toilet and shower area, you can reserve the space of the sink and determine the size of the sink according to the size.

3. Wash basin style

The style of the sink is generally semi-circular or rectangular, and it is best to choose a rectangular style. Because the rectangular sink is relatively large, it is not easy to spill water outside when washing hands and faces, so it is more convenient to use.

4, wash basin work

When we choose the sink, we touch its surface with our hands to see if it is smooth and flat, and if there are any defects such as particles and scratches. The hardware fittings of the sink are also very important, but when choosing hardware fittings, we must choose high-quality fittings, so that the installation will be firmer and the use will be smoother.

5. Wash basin cabinet

Because the bathroom space is limited, and when choosing a sink, you must choose a combination cabinet, which is not only practical, but also saves a lot of space.

1, glass glue

Glass glue used for home decoration is mainly silica gel material, which can be divided into neutral glass glue, acidic glass glue and water glass glue according to its nature. Acid glass glue has strong adhesion, which is corrosive to some materials, but irritating.

Neutral glass glue is suitable for all kinds of materials, such as marble, metal, glass, etc., with little irritating taste, but relatively weak adhesion. Waterborne glass glue has weak adhesion and slow curing process, but it can be coated and dried after drying, so it is rarely used in home improvement.

2. White latex

Home decoration is mostly used for carpentry, wall pasting and so on. It can also be used for pasting leather paper. The curing time is long, and it can only be cured after general operation 12 hours.

3309 glue

Also known as all-purpose adhesive, it is mainly suitable for finished wood boards, plastic surface laminates and metal surface laminates. High bonding strength, long service life, but inelastic, not easy to open glue, not flammable. When in use, both sides of the joint should be bonded in time and left for 10 to 20 minutes.

4. Floor glue

Suitable for wood floors, with short curing time and curing after 1-3 hours. High bonding strength and long service life. Can be used for floor splicing.

5, stone adhesive

Commonly used marble glue is mainly used for matching and repairing various marbles and installing finished boards. Marble glue can be cured quickly within 30 minutes, with high bonding strength and long service life. No expansion and contraction, not affected, easy to open the glue.

What glue is used to install the washbasin? 3 What glue is used to stick the ceramic washbasin?

It can be pasted with glass glue. However, glass glue can be divided into acidic and neutral. Among them, neutral glass glue has weak viscosity and will not corrode objects, so it can be used to paste mirrors, sinks, sanitary ware, toilets and other objects.

Acidic glass glue has strong viscosity and is generally used in the dumb mouth on the back of wood lines, which is more firm and not easy to degum.

What should I do if the ceramic washbasin leaks?

First, the water leakage is not serious.

1, high loss.

If there is a slight water leakage, it is necessary to decide whether to deal with it according to the location of the water leakage. For example, the damaged position is relatively high, and only the rear edge will leak when the water is full, so it can be left untreated without affecting the use.

2. The damaged position is low.

If the damage is low, it can be blocked with plasticine or other waterproof glue. If the hole is low, be careful not to cut your hand when handling it.

3, the appropriate tilt processing

In case of water leakage, if the washbasin can be moved, the contact between the base bracket and the washbasin can be properly adjusted, so that the position of water leakage can be adjusted to the top without affecting the use.

Second, the water leakage is serious.

1. If the water leakage is serious, there is no point in maintenance, so it is better to replace it directly. After all, the price of the washbasin is not more expensive now, and direct replacement is simpler and more effective.

2. If the project is relatively large, it's best to invite professionals to handle it at home, so as to avoid causing more damage in the process of dismantling the sink, which is not worth the candle.