What are the requirements of the electric hanging basket staff?

1. Construction scheme: A special construction scheme should be prepared for the installation of electric hanging basket, and the structural bearing capacity of hanging basket bracket should be checked; The special construction plan shall be examined and approved in accordance with the provisions.

2. Safety device: the electric hanging basket should be equipped with an anti-falling safety lock, which should be sensitive and effective; The anti-fall safety lock shall not exceed the calibration period; The hanging basket should be equipped with safety rope and safety lock, so that the operator can hang the safety belt. The safety rope should be fixed in a reliable position in the building and should not be connected to any part of the hanging basket. Hanging basket should be equipped with upper limit device, and should ensure that the limit device is sensitive and reliable.

3. Suspension mechanism: the front bracket of the suspension mechanism shall not be supported on the non-load-bearing structure such as the parapet and cantilever edge of the building; The extension length of the front cross beam of the suspension mechanism shall meet the product specifications; The front bracket should be perpendicular to the supporting surface, and the casters should not be stressed; The upper bracket shall be fixed at the joint between the adjusting rod of the front bracket and the cantilever beam; It is forbidden to use damaged counterweights or other substitutes; The counterweight should be fixed and reliable, and its weight should meet the design requirements.

4. Wire rope: The wire rope of the electric hanging basket should not have broken wires, broken strands, loose strands, rust, hard bending, oil stains and attachments; Safety wire rope should be set separately, and the model and specification should be consistent with the working wire rope; When the hanging basket is running, the safety wire rope should be tightened and hung; During welding operation, protective measures shall be taken for wire rope.

5. Installation operation: the assembly length of the building hanging basket platform should meet the requirements of product specifications and instructions; The components of the hanging basket shall be the products of the same manufacturer.

6. Hoisting operation: The hanging basket must be hoisted by trained and qualified personnel; The staff in the hanging basket shall not exceed 2 people; The operator in the hanging basket should correctly hang the safety buckle of the safety belt on the special safety rope set independently; Operators should enter and leave the hanging basket from the ground.

7. Disclosure and acceptance: after the installation of the building hanging basket, it shall be accepted according to the requirements of the specification, and the acceptance sheet shall be signed by the responsible person for confirmation; Before and after work, check the hanging basket as required; Before the hanging basket is installed and used, safety technical disclosure shall be made to the operators, and written records shall be kept.

8. Safety protection: the setting of protective railings and skirting boards around the electric hanging basket platform should meet the requirements of the specification; When the hanging basket is interchanged up and down, there should be a top guard plate.

9. Stability of the hanging basket: measures should be taken to prevent the electric hanging basket from swinging when working; The distance between the hanging basket and the working face should be within the specified requirements.

10. Load: The construction load of the electric hanging basket should meet the design requirements and be evenly distributed.