How to add bookmarks?

Material preparation: a piece of hard paper.

The operation is as follows:

1. Select the paper you want. Select a cardboard to support your bookmark, and then paste another pattern or image on it. You can use other paper for collage or choose multiple patterns at will.

2. Paper cutting. Bookmarks can be as big as they are. Cut the cardboard into small and inconspicuous bookmarks only 2.5 mm long, or choose to make traditional bookmarks 5 to 7.5 mm wide.

Step 3 add details. Use screened decorative paper or patterns, cut them out and stick them on card paper. You can paste a textured paper or a pattern cut from a magazine on the whole card paper to add style to your handmade works.

4. Seal the bookmark. In order to protect bookmarks from abrasion or damage, a protective sleeve can be added to bookmarks. If possible, plastic sleeve can be used for lamination. You can also stick wide packaging tape with the same length on both sides of the bookmark to achieve the same effect.

5. Make the final revision. Use a punch to make a hole at the top of the bookmark. Cut the ribbon of 15 into 20cm, and then fold it in half. Pass one end of the circle through the hole in the bookmark, then pass the tail of the other end through the circle and tighten it. You can add various ribbons to make your bookmarks more textured and colorful.

Bookmark is a kind of reading label, which is made of paper, electronic products, plant leaves and metal.

Used to inscribe the title of a book, usually attached to the upper left corner of the cover of an ancient book, sometimes with the book number, the name of the author and the reading place. A bookmark is a small piece of paper sandwiched in a book to record the reading progress. With the development of the Internet era, electronic tags are derived to record the reading progress and experience.