Specification for installation dimensions of sanitary ware

Specification for installation dimensions of sanitary ware

Basic accessories for the bathroom:

1, the distance from the bathtub to the ground is 520mm；; The distance from the drain plug to the wall is 280mm.

2, drainage distance metope size is 50mm；; The reserved drain pipe is 200mm away from the ground.

3. The faucet is 620mm away from the finished ground; The distance between hot and cold water pipes is 50 mm.

4. The distance from the fixed point of shower nozzle to the upper edge of bathtub is1300mm; ; The length of metal hose of shower head is 1500mm.

Installation dimensions of toilet:

1, toilet drainage distance of 420mm；; The installation height of feed pipe angle valve is150 mm.

2. The distance from the angle valve of water supply pipe to the center line of toilet is140mm; ; The distance between the reserved drainage pipe and the ground is100 mm.

Installation dimensions of squatting pan:

1, the drainage distance of squatting pan is 640mm； from the wall; The distance from the foot flush valve of the squatting pan to the center line of the squatting pan is 360 mm

2. The reserved drainage pipe is higher than the ground100 mm..

Installation dimensions of washbasin:

1, drainage distance of support washbasin is150 mm; ; The installation height of bracket washbasin angle valve is 490 mm from the ground.

2. The distance between hot and cold water pipes of support washbasin180mm; ; The distance from the drain of column washbasin to the wall is 210 mm.

3. The size of the washbasin on the stage on the wall is170 mm; ; The installation height of the angle valve on the stage washbasin is 490mm from the ground.

4. The installation height of the corner valve of the corner washbasin is 450 mm from the ground; ; The distance from the angle valve of the angle washbasin to the two side walls is about 200 mm.

note:

Different installation dimensions of sanitary ware have a fixed parameter, which is summarized according to people's usage habits and indoor building conditions, and has certain reference value. If there is a conflict with the actual installation, you can debug it properly.