Seek the method of making CS 1.6 server!

This is only my version, (CS 1.6 Zeng Qiang popular version). Other versions may be different. * * * * * * * Before building the server, please run the "CS Mode Converter" and switch to "Network Warfare Mode"! Because in this mode, it has all the original features of Cs 1.6! If you don't switch, it's a bit like CZ.

1. Basic requirements for server installation

1), hardware requirements

The minimum hardware configuration of the server is about PIII500, and the memory is above 128M. If you have a low memory, you will often work overtime. Fortunately, P4 is relatively common, and the memory is generally above 256M or even higher.

2), the line requires the line as soon as possible. Although the highest speed of continuous uploading and downloading of CS in the game is only 3K/ s, if the PING is too high, people will still be unhappy.

2. The game plug-ins included in this special edition of the server are as follows (provided that the plug-ins are selected for installation and enabled after installation. ):

1), meta-module (server plug-in browser, enabled by default)

2) amxmodx (Super Management Plug-in, enabled by default)

3) booster (server FPS stable plug-in, enabled by default)

4) WWCL (script checking plug-in, which is not enabled by default)

5) Cheating-Death Server (the famous anti-cheating plug-in server is not installed by default, please refer to the following instructions carefully if necessary, this time is different from the past! )

3. How to set up the server (be sure to read it in detail)

This version is a fool version that can be run after installation, but some simple settings (such as server password) need to be made. If you don't want to watch it, run the "CS mode converter" mentioned above and switch to "network battle mode". Then according to whether you want to build a "LAN server" or an "Internet server", directly run "Cs 1.6 LAN server" and "Cs 1.6 Internet server" respectively. (as shown in the figure below). Of course, if you want to know more and how to build a better server, please read the following patiently.

1), set up a "graphical interface" server:

Run the hlds.exe file in this directory directly. And fill in your own server name, number limit, Internet or LAN mode, OP password and other related settings in the settings.

2) Install "Console Mode" server [recommended]:

A, please select the hlds.exe file in the directory CS 1.6 to create a shortcut, which can be sent to the desktop, and then right-click the "Properties" of the shortcut, and fill in "All Highlighted Contents" after "Target" of the "Properties".

-game cstrick+servercfgfileserver.cfg-unsafe-port 27016+maxplayers14+map de _ dust 2+SV _ LAN 0- console

The modified parameters should be as follows:

"X:\CS 1.6 Okgogogo enhanced popular version \ hlds.exe"-gamecstrike+servercfgfileserver.cfg-insert-port27016+maxplayers14+mapde _ dust2+SV _ lan0.

& lt Remember to leave a space after "... \ hlds.exe". > (change "0" in +sv_lan 0 to "1", that is, local area network. )

BoeZombie s Interpretation of Common Start-up Parameters in hlds.exe;

-Console

//Start the server in console mode;

-Game cstrike

//Specify that the server content is CS; This is a required parameter in console mode;

-Not safe

//Cancel the anti-cheating module of VAC valve; If you want to load VAC, please cancel this parameter and make sure that Secure "1"exists in [HL server \ cstrike \ lib list. gam];

-IP 192. 168. 1.2

//Specify the IP address of the server as192.168.1.2; This IP address must be a valid intranet or extranet IP of the server.

-Port 27026

//Specify the server port as 27026, and the port range is generally: 270 10~27030. When this parameter is empty, 270 15 defaults to the server port;

+maxplayers 14

//Specify the maximum number of servers (14, ranging from 1 to 32);

+Map Dust 2

//Specifies that the server map is de_dust2, and the alternate map refers to [hlserver \ maps \ *. bsp]；

+sv_lan 0

//Specify the server as the Internet server; +sv_lan 1 is a lan (local area network) server;

-Norman.

+servercfgfile server2.cfg

//Specify [HLServer\cstrike\server2.cfg] as the server settings file; When this parameter is empty, by default, [HLServer\cstrike\server.cfg] is the server settings file;

+mapcyclefile mapcycle2.txt

//Specify [hlserver \ cstrike \ mapcycle2.txt] as the mapping cycle list file; When this parameter is blank, [hlserver \ cstrike \ mapcycle.txt] defaults to the map circular list file;

+motdfile motd2.txt

//Specify [HLServer\cstrike\motd2.txt] as the content of the server welcome window; When this parameter is empty, [HLServer\cstrike\motd.txt] defaults to the contents of the server welcome window;

+logsdir log2

//Specify the directory where the server logs are located as [hlserver \ cstrike \ logs2]; When this parameter is empty, [HLServer\cstrike\logs] is the directory where the server logs are located by default;

-Noy

//Turn off the server's support for the handle rocker, and the client can use the handle rocker, etc. This may only be to relieve the CPU pressure slightly, because the server closed the handle rocker support port;

-noipx

//Turn off support for NetWare IPX; Slightly reduce the pressure on CPU, unless playing on NetWare LAN;

-250,000 pounds

//Specify that HLDS uses 250 MB of memory, which can improve the performance of the server if there is enough memory; This parameter is not required.

-Area 2048

//Even if the statement in consloe is too long, the server will not hang up; This parameter is not required.

+Login

//Server logging is turned on;

B Similarly, you can edit two bat files "Cs 1.6 LAN server" and "Cs 1.6 Internet server".

Specific methods:

Right-click "Cs 1.6 Internet Server" and select "Edit" to open the file. You can also modify the common startup parameters of "hlds.exe".

Mapcycle.txt is the sequential file of map file cycle.

Mapcycle.txt contains all map file names without suffixes, such as de_dust2.bsp, and only takes de_dust2.

Maps in the X:\CS 1.6 Okgogogo enhanced version \cstrike\maps directory, pick out the maps that you want to cycle, and then enter the file name into mapcycle.txt according to the above rules, and separate each map by pressing enter. The new map added should not only put *. Bsp file

Copy to the X:\CS 1.6 Okgogogo enhanced version \cstrike\maps directory, and add the name of the new map in mapcycle.txt, remember!