Illustration of Malfunction Lights in Mazda Artz Instrument Panel

Instructions for use of the complete set of illustrations of Mazda's Artz fault lights

Most of the indicator lights are divided into four categories:

① Bright red indicator lights mean warning, and driving again may cause risks at this time

② Light yellow indicator lights represent the function of early warning information, but corresponding problems need to be properly handled.

③ The dark blue indicator light advises car buyers to think carefully, such as whether the high beam will do harm to other cars.

④ The emerald indicator light is a multifunctional lighting effect, such as direction light, width light and proximity light.

The following is a detailed explanation of the Atz indicator light of Mazda (serial number matching diagram)

4. Cleaning liquid level meter

When the indicator light is on, it means that it is time to fill the car window or headlight cleaning equipment with cleaning liquid.

5. Brake system friction piece

The friction piece becomes soft and thin, and it will not meet the requirements of the brake pedal again. Be sure to replace it immediately. Friction discs on the same shaft should be removed and replaced at the same time to avoid the direction deviation of the braking system.

19. Switching to locking system software

There is a functional problem in the steering system of the car, so the car cannot be switched to. Therefore, don't tow the car at this moment, which will definitely lead to safety accidents.

21. Tire inflation working pressure video monitoring system

This fault indicator will light up whether the tire working pressure is high or low. Naturally, it may be that there is information recorded again after changing the tire.

31. Electric pedal parking brake

When the hand brake is tightened, the indicator light will light up, and it will go out when you learn to put it down. When the indicator light keeps flashing, it means that the brake _ is in normal working position, which is likely to cause the risk of slipping.

32. Battery power consumption

The battery power is insufficient.

48. The refrigeration system

There may be a shortage of refrigerant, or the fan may not be working.

49. Anti-lock braking system (ABS)

The failure indicator light is on, indicating that the anti-lock braking system is invalid at this time. The occurrence of EDS in electronic differential system will also cause the fault indicator to light up. At this time, if the brake pedal is crushed quickly, it may cause uncontrollable personal behavior such as side slip.

53. The mark

of total gasoline and diesel oil lights up for the first time, which means about 8L of gasoline and diesel oil remains. When gasoline and diesel are on for many times, it means that common faults may occur in the gasoline and diesel system.

57. Engine oil quantity

The oil pressure is too low or the remaining oil is not enough.

6. Electric motor control driving smoothness system software (ESP)

When the fault indicator light is on for a long time, the ESP function is turned off or invalid. ESP is mainly to avoid risks such as sideslip and drift.

62. Video monitoring system for organic waste gas

Cause: the problem of automobile engine or the problem of purification treatment equipment such as three-way catalytic converter.

million car purchase subsidy