Safety responsibility letter for projects under construction

Safety Responsibility Letter for Projects Under Construction (Selected 5 Articles)

In today’s society, responsibility letters are used more and more widely in life. Signing a responsibility letter can effectively enhance our safety Consciousness and initiative. How is a general liability letter drawn up? The following are the safety responsibility documents for projects under construction that I have collected for you (selected 5 articles). Welcome to read and collect them.

Safety Responsibility Letter for Projects Under Construction 1

In order to implement the party and the country’s production safety policies, prevent the occurrence of various accidents in production, and ensure the safety and security of national property and people’s lives The work must be carried out according to the principle of "whoever is in charge is responsible". According to the construction characteristics of this project, this responsibility letter is specially formulated.

Item 1. Personnel working at heights and construction on high slopes and cliffs

Article 1. Dangerous loose pumice has not been removed. Construction under the slope is not allowed, and safety equipment is not worn. No construction is allowed without a hat or a safety rope. The safety rope should be on a solid fixture. Uninspected safety ropes are not allowed to be used. Construction on the top and bottom of the slope is not allowed at the same time. Excavation of earth and stone should be from top to bottom, and digging of "fairy soil" is strictly prohibited.

Article 2. Safety ropes, safety helmets, and safety nets must be worn during bridge construction and high-altitude operations.

Article 3. When excavating a deep foundation pit, no earth or rocks should be piled within 2 meters around it. When erecting supports, the structure should be reasonable and solid according to the technician's requirements. Non-slip shoes must be worn on bridge supports and high-altitude operations, and playing during construction is strictly prohibited. Personnel with high blood pressure, heart disease and other diseases, as well as those who are not accustomed to working at heights, are not allowed to work on bridge supports and high slopes. Warning personnel should be provided when erecting the scaffolding to prevent casualties from entering and being injured.

Article 4. When constructing structures and lifting and transporting stones, the lifting ropes and poles should be checked in advance. It is strictly forbidden to stand under high retaining walls and bridge abutments. Dump trucks (tractors) are required to load earthworks and stones. When building road materials, it is not allowed to throw them around, they should be carried out in order, and it is strictly forbidden to carry people on the dump truck (tractor).

Item 2. Construction in special seasons and at night

Article 1. Construction during rainy season and flood period should be based on the local weather forecast and the specific conditions of the construction site, and flood prevention during the construction period should be carried out Drainage work.

Article 2. During construction in the rainy season, accumulated water should be removed from the construction site in time, and steps should be dug or sand should be paved on the up and down slopes of crosswalks. Anti-slip measures should be taken on scaffolding, ramps and springboards. Strengthen inspections of supports, scaffolding and earthworks to prevent tipping and collapse.

Article 3. For projects that will be operated in the rainy season for a long time, canopies should be erected according to conditions. Construction should be suspended if there is a storm during construction.

Article 4. Winter construction must strictly implement the relevant regulations on winter construction, and take safety protection measures such as thermal insulation and anti-freeze.

Article 5. During construction in high-temperature seasons, heatstroke prevention measures should be taken in accordance with labor protection regulations. Adjust your work and rest schedule appropriately and try to avoid high temperature times.

Article 6. During night construction, the lighting equipment on site must meet the operating requirements. Street lights should be installed at the construction site.

For temporary projects such as small bridges and culverts under construction and pipelines crossing the roadbed, fences should be set up and red light warning signs should be hung.

Item 3. Traffic Safety

Article 1. Promote and educate construction workers to abide by traffic rules. It is prohibited to take transport vehicles and other construction machinery to and from get off work, and they are not allowed to climb by force. car. Any resulting casualties will be borne at your own risk.

Article 2. When moving air compressors, mixers and other machinery, unified command, unified orders, and designated personnel must be responsible. Idle people are not allowed to enter the work area, and construction workers are not allowed to drive the machines (vehicles) for fun. , When the gravel crusher and sand blasting machine are working, you are not allowed to put your hands into the feeding hopper, and you are not allowed to go to work barefoot. When inspecting the motor, the power should be cut off first, and a dedicated person should guard the switch.

Article 3. All transportation machinery that enters this contract section to participate in construction must abide by traffic rules. Unlicensed driving, drunk driving and "sick" driving are strictly prohibited, and they must obey the inspection and inspection of the construction site safety officer. The commander and technician arrange to unload materials at the designated location.

Item 4. Public security and compliance with laws and regulations.

All personnel and construction teams participating in the construction of this contract section must abide by relevant national laws and regulations, consciously maintain social order, abide by local village rules and regulations, respect folk customs and public security regulations, and be law-abiding citizens. , the construction team must accept the management of the local administrative department, public security department, and project department. Each construction worker must hold a resident ID card or a township-level identity certificate before entering the site for construction. Construction workers are not allowed to steal or engage in other illegal activities, let alone commit murder and cause trouble. The construction team is not allowed to stay overnight with criminals who are breaking the law or being pursued by the public security organs.

Whenever a construction team enters a highway construction site in our township, the person in charge shall be fully responsible for the safety of the construction site and must strictly abide by the provisions of this responsibility letter, strengthen safety education and safety learning for construction personnel, and strengthen For safety management, full-time safety officers are deployed to conduct safety inspections on the construction site every day to discover potential accidents and eliminate them in a timely manner to achieve "safety production, prevention first".

During construction, if the construction team violates the relevant provisions of the certificate of responsibility, the township government has the right to report to the higher-level people's government and the project management department, and issue a rectification notice to the construction team or suspend work for rectification.

Responsible person:

Date: Safety Responsibility Letter for Projects under Construction 2

In order to institutionalize, normalize and standardize the work of safety production, make responsibilities clear and Tasks are specific. This responsibility letter is specially formulated in accordance with relevant measures and the actual situation of the project department.

1. Responsible objects

The person in charge of the construction unit is the first person responsible for safety production and is fully responsible for the safety production work of the unit. The person responsible for safety production (safety officer) is The person directly responsible and other responsible persons shall be responsible for the safety production work within their own construction scope.

2. Responsibility objectives

1. Establish and improve the safety production leadership organization to implement personnel, systems and measures. Develop an annual production safety plan and sign a production safety responsibility letter with relevant responsible persons and all employees.

2. Carry out safety production publicity and education work, create a good safety production atmosphere, and enhance the safety awareness of all employees.

3. Strengthen daily safety supervision, eliminate safety hazards in a timely manner, ensure that there are inspection records every day, rectification measures are in place, and implementation is effective.

4. Emphasize the management of safety details, formulate an accident emergency rescue plan, and report it to the safety committee of the project department for record. If an accident occurs, you should actively organize rescue and truthfully report it in accordance with relevant regulations, actively participate in the aftermath, and assist in the accident investigation. deal with.

3. Specific measures

1. The main person in charge of the construction team, safety management personnel, and special operations personnel must participate in training and hold a certificate to work, and the certificate holding rate reaches 100.

2. Safety belts, safety ropes, safety helmets, dust masks and other labor protection supplies must be fully equipped.

3. When entering the construction site, you must wear a safety helmet and other labor protection supplies correctly. It is strictly prohibited to wear sandals, slippers, high heels or short skirts or shorts to enter the construction site.

4. Safety protection measures for mechanical equipment are in place, and the responsible person is clearly defined. Operators should be familiar with the safe operating procedures of this type of work. All parts of the equipment must be inspected before operation to ensure safety before operation. The equipment should be parked. It is prohibited to park in a location that is flat, safe, free of any obstacles, and does not affect the passage of other vehicles. It is prohibited to park in a place that may collapse or where the address is unstable.

5. Safety protection must be implemented in accordance with relevant regulations in tunnel operations. Professional safety officers must check the safety conditions in the tunnel around the clock and establish a handover system to effectively ensure that safety measures in ventilation, drainage, power supply and other links are in place. .

6. On-site construction must abide by the principle of "safety first, civilized construction", and have complete safety warning signs, slogans, and logos.

7. Strengthen safety education for workers. All workers must undergo level 3 safety education training before taking up their posts. The employee training rate reaches 100.

8. Construction access roads, living areas, and canteens must comply with relevant safety standards, and fire protection and food hygiene systems must be implemented.

9. Explosive personnel must hold relevant certificates and comply with relevant safety regulations during each blasting process. Unused blasting equipment shall not be placed on the construction site and should be returned to the pyrotechnics depot.

10. The use of electricity must comply with construction standards, professional electricians must be equipped, and unlicensed personnel are strictly prohibited from engaging in live work.

11. All vehicles in the construction area must abide by traffic regulations. It is strictly prohibited to use "three noes" vehicles. Workers are strictly prohibited from taking construction vehicles (non-passenger vehicles). Drivers must strictly abide by the relevant regulations of the project department.

12. The construction team must establish an emergency rescue organization and be equipped with necessary emergency rescue equipment.

Responsible person:

Date: Safety Responsibility Letter for Projects under Construction 3

Party A: xxxx

Party B: x

In order to thoroughly implement the "Safety Production Law", further improve the awareness of production safety, implement the safety management system, and strengthen the safety management of the construction project department. Combined with the actual situation of our construction site, we will improve our construction site safety target management, and effectively guide our work with the policy of "safety first, prevention first" to improve our sense of responsibility, prevent the occurrence of various accidents, and protect the health of workers and national property. Without any loss, our company (project department) specially signs the following safety production responsibility letter with your unit.

1. You must protect yourself before operating to ensure the safety of yourself and others.

2. Strictly implement welder safety operating procedures, and welders must hold a certificate to work. Construction operators must conscientiously implement the technical safety specifications for temporary electricity use at the construction site.

3. The electric welding machine and its shell must meet the requirements; it must be well grounded, and the installation and disassembly of the power supply should be carried out by a full-time electrician.

4. Protect against rain and moisture. It is forbidden for the ground wire and ground wire to come into contact with the steel wire rope. It is strictly forbidden to use steel wire rope or electrical equipment to replace the neutral wire.

5. After the work is completed, the power supply should be cut off and the equipment should be stored in the warehouse.

6. Carefully follow the safe operating procedures for high-altitude operations. The use of water, electricity, and fire in construction operations must be negotiated with Party A and the project development unit in advance to determine the use procedures and scope.

7. Party B shall be solely responsible for casualties and accidents caused by work negligence during the construction operation and on the construction site. Party A shall not be responsible for any joint liability. At the same time, Party B shall also bear the local government's liability for Party A's accidents. Fines and corresponding legal responsibilities shall be borne in accordance with the provisions of the Production Safety Law.

8. During the construction process, Party B’s personnel must protect the integrity of various facilities and equipment on the construction site and the protection of finished products; destruction, random installation, random dismantling, etc. are strictly prohibited. If there is any damage, Party B will be responsible for all recovery costs.

9. It is strictly prohibited to throw, play or fight on the frame. Materials should be placed in designated places and neatly stacked.

10. Party B must implement safe and civilized construction, be equipped with and distribute labor protection supplies, use and wear them correctly, adhere to regular safety inspections, and promptly rectify and eliminate safety hazards and unsafe factors in operations.

This book is made in duplicate, with Party A and Party B each holding one copy.

Party A (seal) Party B (seal)

Legal person or agent of the entrusting unit:

Date:

Person in charge :

Date: Safety Responsibility Letter for Projects under Construction 4

In order to ensure the implementation of the production safety responsibility system, strengthen the safety production management of the project department and ensure the life safety and occupational health of construction personnel , is now clearly the first person responsible for safe and civilized production of the team, and his responsibilities are as follows:

1. Responsibility goals

1. Prevent death and serious injury accidents, prevent minor injury accidents, minor injuries The frequency of accidents does not exceed the requirements of the project department. Focusing on controlling that there are no safety hazards at the work site, that workers do not operate illegally, and that personal protection is in place, we focus on prevention, strengthen management, and strive to achieve zero safety accidents throughout the year.

2. Prevent construction pollution, protect the living environment, protect the health of employees, and make no mistakes that affect the project's creation of a safe and civilized construction site, or make mistakes that damage the company's image and reputation.

2. Guarantee measures

1. The team leader should sign a safety production responsibility letter with the team members, and the responsibilities should be divided among the people. We should be responsible for the safety and occupational health of our team members, and be responsible for the actions of our team members in fulfilling their responsibilities.

2. Team leaders should hire people who are healthy and have corresponding job skills. They are not allowed to hire minors, those with physical defects, diseases, old age, infirmity and unknown identities that may affect their work. personnel.

3. Team members should receive safety education and training organized by the project department. The team leader should provide safety education and training to the team members before taking up their posts, safe operating procedures for this type of work, and necessary safety precautions. Improve workers' safety awareness and safe operation skills. Personnel without education and training are not allowed to work.

4. The team leader should conduct pre-shift safety activities, and brief and comment on the pre-shift safety operations of the operators based on the construction characteristics, working environment, personnel conditions and weather conditions of the day.

5. The team leader shall inspect the working environment, tools, equipment and various protective facilities of the team before the shift to ensure their safety and reliability before use.

6. During the construction process, the team leader should monitor the work site and operation process, stop illegal operations in a timely manner, and eliminate potential accidents in a timely manner. If potential safety hazards are discovered, they should report to the leader in a timely manner. In case of danger, the team leader can be organized Evacuate the dangerous area urgently or take decisive and effective measures.

7. Team members should abide by the project department’s safety production and civilized construction regulations, and strictly implement safety technical disclosure and safety technical operating procedures for sub-projects. It is strictly prohibited to give orders in violation of regulations, to operate in violation of regulations, to perform risky operations, to work under the influence of alcohol, to work while sick, to dismantle or misappropriate all safety facilities at will, and to operate machinery indiscriminately by non-designated personnel.

8. Use personal safety protective equipment correctly. When entering the construction site, you must wear a safety helmet. When working at high altitudes or near edges without protective facilities, you must fasten your seat belts. Violations of regulations will be punished.

9. The team leader should actively participate in the safety inspections and meeting activities of the project department, and promptly organize rectifications of problems raised by the project department to eliminate hidden dangers and ensure safe production.

10. Safety responsibility system

(1) Construction team captain

The construction team captain is the first person responsible for the safety production of their respective pipeline sections. Lead the entire team of employees to conscientiously implement various safety production rules and regulations from superiors, strictly implement safety management standards and operating procedures, stop "three violations" and ensure the safety of construction operations.

Resolutely obey the supervision and inspections of superior leaders, supervisory engineers, and safety supervisors. Conscientiously adhere to the "three tasks" (pre-work explanation, in-work inspection, and post-work evaluation) system, actively carry out safety production activities, and keep safety activity records and shift handover records. Carefully organize safety education and technical learning, conduct inspections during construction, and eliminate hidden dangers of accidents.

After an accident occurs, organize rescue immediately, protect the scene, and report the accident to superiors in a timely manner.

Be directly responsible for accidents and economic losses caused by illegal operations or even failure to obey instructions.

(2) Full-time safety officers of the construction team

After training, they are qualified to serve as safety officers and are specifically responsible for the safety inspection of their respective pipe sections. Work under the leadership of the construction team leader, assist the construction team leader in implementing safety production regulations and protective measures, and supervise and inspect. Be familiar with the type of work being performed. Its tasks include establishing health protection and accident prevention measures and monitoring the implementation of all safety rules and regulations. Timely discover and stop illegal command and operation behaviors, and correct and eliminate unsafe factors in the human, machine, and physical environment. Danger that endangers personnel and equipment must be eliminated in a timely manner, and major dangers have the right to stop the continued construction and report to the team leader at any time. Be liable for accidents caused by negligence at work.

(3) Part-time safety officer of the team

Carry out construction together with the construction team, conduct on-site safety inspections, and check whether the construction operating conditions are safe. Criticize and educate workers who violate regulations, and guide team members to use protective equipment correctly. Take timely measures when discovering potential safety hazards and report to the team safety officer and the Safety Supervision Department.

3. Reward and Punishment Measures

1. Teams that can conscientiously implement guarantee measures, complete responsibility goals, and have no safety accidents throughout the year will be rewarded at the end of the year. The rewards will be reported by the project department manager. Approved by company leaders.

2. Team leaders and workers who model compliance with various safety and civility systems, actively carry out work, dare to resist illegal orders, dare to stop illegal operations, and prevent work-related injuries and accidents will be rewarded by the project department.

3. If an accident occurs in violation of Article 2, the team leader shall bear 80% of the financial responsibility.

4. Anyone who violates Articles 7 and 8 will be fined 10-50 yuan each time.

5. If a fatal accident occurs due to violation of regulations, the team will be fined 10,000-30,000 yuan; if a serious injury accident occurs, the team will be fined 5,000-20,000 yuan; if a minor injury accident occurs continuously, the team will be fined 1,000-3,000 yuan. The team bears financial responsibility for 20-80 RMB of accident handling expenses.

6. Violations of other provisions will be dealt with as appropriate.

Responsible person:

Date: Safety Responsibility Letter for Projects under Construction 5

Party A (contractor): ______________ Party B (contractor): ______________

In order to safeguard the common interests of both parties, Party A and Party B, ensure construction quality and safe production, maintain good working order and a hygienic environment at the construction site, after equal consultation between Party A and Party B, the construction safety production responsibilities of this project have been signed. Book.

1. Basic information of the project

1. Construction project: _________________________________________

2. Validity period: _________year____month____ _________year____month____

3. Project location: __________________________________

2. Party A’s safety responsibilities

1. Conscientiously implement The state promulgated the "Work Safety Law of the People's Republic of China", "Fire Protection Law of the People's Republic of China", "Environmental Protection Law of the People's Republic of China", "Occupational Disease Law of the People's Republic of China" Prevention and Control Law, Labor Law and other laws and regulations on labor protection and production safety, and urge Party B to implement them.

2. Establish and improve the safety production management system: Establish a safety management organization of the project department, establish and improve the safety production responsibility system, implement the safety management system, equip full-time safety management personnel, improve rules and regulations, and formulate safety production for various types of work Observe operating procedures and make technical briefings. Party A shall require Party B to formulate construction safety measures, which shall be submitted to Party A's Project Technology Department for record upon approval by the supervisor before starting construction.

3. Establish a safety education system: Safety education should be provided to Party B’s construction workers; including first-level education and regular education for new workers (or entering new positions); and safety information recording and collection should be done well. , organizing and archiving work.

4. Establish a safety production inspection system. The company and the project department regularly conduct safety inspections on the construction site and keep written records; they have the right to issue hazard notices to Party B for potential unsafe hazards during construction and rectify them within a time limit. If the circumstances are serious and rectification is not made on time, Party A has the right to Party B has the right to stop Party B's operations, and Party B shall bear all responsibilities for any consequences arising therefrom.

3. Safety responsibilities of Party B:

1. Conscientiously implement the "Work Safety Law of the People's Republic of China and the People's Republic of China" and the "Work Safety Law of the People's Republic of China and the People's Republic of China" promulgated by the state Fire Law, "Environmental Protection Law of the People's Republic of China", "Law of the People's Republic of China on the Prevention and Control of Occupational Diseases", "Labor Law" and other labor protection and safety production laws and regulations.

2. Establish and improve the safety production management system:

(1) Must strictly abide by relevant national systems and various safety rules and regulations, operating procedures and regulations issued by Party A management procedures and strictly obey the safety supervision and management of Party A’s personnel. And designate a dedicated person to be responsible for supervising safe construction operations.

(2) Before construction personnel enter the site, they must first submit the original copies of the site person in charge, the roster of construction personnel (including management personnel, construction personnel, and special operations personnel), enterprise qualification certificates, and power of attorney to the supervisor. After review, a copy (copy signed by the director) will be sent to Party A’s Project Technology Department for filing.

(3) Party B shall, in accordance with relevant national regulations, apply for personal insurance for construction workers and equip them with qualified labor protection supplies and safety equipment. Risk warning:

Before the start of the project, the contractor must organize all construction personnel to conduct safety education, skills and safety examinations by type of work. Only those who pass the test can enter the site for construction. Those who need to change types of work, add or transfer personnel must undergo safety education and skills and safety examinations before taking up the job, and report to the safety department of the contractor for record. Special operations personnel must hold a valid "Special Operations Certificate".

3. Establish a safety education system: Before the start of construction, Party B shall organize all construction personnel to conduct three-level safety education (Party A’s first level and Party B’s second and third level) and take up their posts after passing the examination. They will also participate in safety education The list of educational personnel (including temporary additions or transfers) and examination results shall be reported to Party A’s Project Technology Department for record. Special operation personnel must hold corresponding valid special operation certificates and be trained to work. It is strictly prohibited for unlicensed and untrained personnel to work.

4. Establish a safety production inspection system.

(1) Party B must conduct regular safety inspections on the construction site and keep written records, and promptly rectify and correct the accident hazard rectification notices issued by the construction safety supervision agency or Party A’s safety management personnel where the project is located. Write out a feedback form for rectification of potential accident hazards, and after acceptance and signature by the construction unit, supervisory engineer and person in charge of the construction enterprise, submit one copy to the construction safety supervision agency where the project is located or to Party A's project technology department and engineering management department.

(2) Party B will inspect the labor protection of construction workers before and after work every day, urge construction site personnel to consciously wear safety protective equipment, and explain construction safety precautions.

(3) The right to refuse construction and report to Party A for situations that may endanger personal and property safety or do not provide a safe production environment.

(4) The construction unit should send full-time safety production management personnel to supervise and inspect the implementation of the safety technical measures compiled in the construction organization design and the temporary power consumption plan at the construction site. Prepare special construction plans for hazardous sub-projects that reach a certain scale, with safety calculation results attached, and implement them after approval and signature by the technical person in charge of the construction unit and the chief supervisory engineer.

5. Establish a production safety accident reporting and handling system:

(1) Party B shall report to Party A immediately any casualties or equipment accidents or unsafe conditions that endanger production operations during the construction process. party and actively cooperated with the investigation.

(2) Party B must immediately report any personal injury or death accident that occurs during construction to the government safety management department, public security department, and labor union at the location of the accident by telephone, telex, or telegraph, as required. Organize investigation and processing, and Party B will make statistical reports and be responsible for financial compensation and aftermath handling.

6. Construction site safety management:

(1) On-site construction should comply with national and local laws, regulations and rules on labor safety and labor employment to ensure the legality of its employment.

(2) Party B must provide personal insurance for construction workers and equip them with qualified labor protection supplies and safety equipment in accordance with relevant national regulations. When entering the construction site, you must wear qualified labor protection equipment correctly as required.

(3) Vertical crossing operations are strictly prohibited on site; it is prohibited to throw tools, accessories and objects up and down when working at heights; workers inside the building are strictly prohibited from throwing garbage and any other objects out of the windows or edges to prevent objects Hitting hurts.

(4) Party B must assign dedicated personnel to supervise work items that are more dangerous.

(5) Party B needs to use electricity and water during the construction process. Party B should contact Party A in advance, and no unauthorized connections are allowed. When electricity is required for construction, it must be operated by a full-time electrician; any work that requires cooperation or assistance from Party A must be carried out under the unified arrangements of Party A's electrician.

(6) Party B shall implement civilized construction and safe production, clean the site at the end of daily work, stack materials in an orderly manner, keep the construction site beautiful and tidy, and prevent environmental pollution.

(7) The quantity and quality of the construction machinery, tools and safety protection equipment used by Party B for this project must meet the construction needs, and have been inspected by a qualified inspection unit to comply with safety regulations. We are responsible for personal injuries and equipment damage caused by improper tools and tools.

(8) Party B shall install temporary fences or warning signs in the construction area. Without Party A’s consent, Party B shall not use Party A’s facilities and equipment unrelated to the construction without authorization; Party B shall not dismantle or change Party A’s protection without authorization Facilities and signage.

(9) Party B must accept the supervision and inspection of Party A, and must promptly rectify the safety rectification suggestions put forward by Party A. Risk warning:

If one party violates the above provisions or violates fire protection, public security and other safety regulations, and its behavior seriously affects the normal production, operation and safety management of the other party, the two parties can agree on the liability for breach of contract accordingly. , so that when a breach of contract occurs, enforcement can be more convenient.

IV. Liability for breach of contract If Party B causes personal injury, equipment damage and other property losses to third parties due to Party B's responsibility, Party B shall bear the corresponding liability and compensate the third party for all losses caused thereby.

5. Liability for accidental claims. If an accident occurs during the construction process and causes personal injury or death, the insurance company will be responsible for settling the claim in accordance with the relevant regulations and quotas. Party A will not be liable for compensation.

6. Party A and Party B must strictly implement this agreement. The legal effect of this agreement is independent of the main contract.

7. This agreement will come into effect after being signed and stamped with an X by the legal representatives or authorized agents of both parties.

8. This agreement is made in two copies, with Party A and Party B each holding one copy.

9. The signing place of this agreement is at __________________.

Party A: __________________ Party B: __________________

_______year_____month_____day_______year_____month_____day;