How to make warehouse shelf signs

1. Ground access lines and area division lines

1) Line type

Category A--yellow paint solid line

Line Width 60mm: In principle, it is used for item positioning lines;

Line width 80mm: In principle, it is used for equipment area lines;

Line width 120mm: In principle, it is used for main channel lines.

Category B-yellow paint dotted line

Line width 60mm: internal division line of large work area, passage line allowed to be crossed (can be combined with virtual and real);

Category C--red solid line

Line width 60mm: the dividing line of the defective product placement area (where three walls are encountered, a red solid line is drawn on the fourth side of the ground);

Category D-twill zebra crossing composed of yellow and black (tilt 45°)

Dangerous goods area line, warning area line, fire escape line;

2) Positioning line

Category A - Positioning of equipment:

All equipment and workbenches are positioned with yellow four-corner positioning lines. The inner space of the four-corner positioning lines of the workbench is marked with "XX workbench/equipment" " words.

Category B - Defective product area (waste recycling barrels, boxes, defective product placement racks) positioning

Use red lines. If the positioning range is less than 40cm×40cm, use it directly Closed solid line frame positioning;

Category C - positioning of fire-fighting equipment, oil, chemicals and other dangerous goods

Use red and white warning positioning lines;

Category D—Positioning of material stacking racks, regular-shaped common items, and all equipment that can be moved or easily moved

Use yellow four-corner positioning lines;

02

< p>Category E—Positioning of door opening areas where items such as fire hydrants and power distribution cabinets are prohibited to be placed

Use yellow and white zebra-style filling lines;

Category F—Mobile equipment Positioning (such as hydraulic forklifts, electric forklifts, material turnover vehicles, etc.)

Use positioning lines around the yellow line and indicate the starting direction;

G category-positioning of shelves

p>

Category H--door opening and closing line

Category I--height limit line

Category J--warning range line

Set in Fire hydrants on the wall; power distribution cabinets, distribution boxes, electrical control cabinets, etc.; areas to remind people to pay attention to work operations, areas to remind people to pay attention when walking, places to remind people to meet, etc.;

K category - countertop Item positioning

Parts to be processed, processed parts, work tools, inspection tools, record sheets, small boxes;

03

2. Channel marking< /p>

3. Precautions for painting

Because there is a certain deviation between the computer display effect and the actual color, various colors (bright yellow, sky blue, bright red, standard green) can be used The color is adjusted according to the actual effect, but it must be close to the color sample displayed on the computer and consistent within the factory.

4. Tool identification plates

The company has customized identification plates for tool cabinets, mold racks, and object cabinets (attached to the upper left corner of the cabinet door) to indicate the tool category and person in charge.

Each unit can make individual adjustments when implementing the above regulations. For example, some simple occasions that only need to identify names can be printed and produced by themselves, but they must be eye-catching and beautiful, and strive to be unified and standardized within the unit.

5. Workshop material identification plate

The material placement points, to-be-processed and processed materials placement points within the workshop, and the control of material name, quantity, specification and maximum limit.

6. Setting up regional signboards

7. Other precautions

Trash cans should not be stored at fixed points against walls, and should be cleaned regularly to avoid overflow or backlog.

The workplace layout map should plan and show:

Production site (or team area location)

Passage

Work in process turnover Ground

Garbage storage point

Others

In the work or production site, all facilities and items not indicated in the placement plan should be removed and completed as shown in the plan. Things match.

Curtains or other obstacles cannot be hung on the windows in the workshop.

The team rest area has clear placement and slogans.