Safety officer personal summary

Safety Officer Personal Summary 1

Internship content

After arrangement, I was assigned to the xx Project Department of the Sixth Branch of xx Construction Corporation, as a construction site safety officer The responsibilities are as follows:

1. Under the leadership of the project manager, be fully responsible for supervising the implementation of safety measures in the construction organization design, and responsible for making safety technical briefings to the operation team.

2. Check whether the construction site safety protection, underground pipelines, scaffolding safety, mechanical facilities, electrical lines, storage waterproofing, etc. comply with safety regulations and standards. If any unsafe hazards are discovered at the construction site, improvement measures should be promptly proposed, their implementation should be supervised, and the improved facilities should be inspected and accepted. For those that do not improve, suggestions for disposal will be submitted to the project leader for handling.

3. Correctly fill in the safety production report on the inspection of safety measures at the construction site, and regularly provide opinions on the safety production situation analysis report.

4. Handle general safety incidents.

5. Carry out registration, statistics and analysis of work-related accidents in accordance with regulations.

6. Sign a safety discipline agreement with each construction team and individual.

7. Conduct safety supervision, inspection, and guidance on the construction site at any time, and keep safety inspection records. Provide safety education and punishment to teams and individuals who do not comply with safety standards during construction, and promptly order rectifications.

8. If the safety inspection is not in-depth or detailed, or if there are problems, the safety inspection is not carried out in an in-depth and detailed manner, and if there are problems, the safety inspection is not carried out, and the safety inspection is not reported to superiors, any accidents caused by the accident shall be fully responsibilities and consequences.

The content of my internship is to gradually become familiar with the above content under the leadership of the master. I follow the master to the construction site every day to inspect and look for safety hazards. Of course, in just one month of internship, I am not familiar with all the above content and have practiced it, but I have only learned part of it.

Internship results:

After this internship, I gained a perceptual understanding of the major I am about to engage in from practice, and laid a solid foundation for future professional study. . It not only allowed us to learn a lot of knowledge that we could not learn in the classroom, but also broadened our horizons and increased our knowledge, laying a solid foundation for us to better apply the knowledge we have learned to practical work in the future. Through production internship, I have more in-depth contact with professional knowledge, further understand the importance of rationally controlling the cost of construction projects, understand the problems existing in the project construction management process and the difficult issues that conflict between theory and practice, and through writing internship reports, I have learned Comprehensively apply the knowledge learned to improve the ability to analyze and solve professional problems.

Experience and gains from the internship:

First of all, the gain from this internship is that I learned to adapt to the environment. Before going to the construction site, I never imagined that I would be able to endure a one-month internship. But through this internship, I adapted to this kind of construction site life. Although I may not necessarily work on a construction site in the future, after this period of training, I will have a hard-working perseverance no matter what kind of work I do in the future, and I will also learn to adapt to the environment. In addition, I learned about some issues that are different from those in school at the construction site, that is, I learned how to communicate with workers as a technician at the construction site.

Secondly, through this internship, I have a deeper understanding of the relevant knowledge of engineering. It should be said that no matter how much professional knowledge you learn in school, it is only theoretical and is still somewhat different from reality. This internship has helped my drawing and drawing abilities to a certain extent. When reading pictures, I know where to pay attention and calculate carefully. Where on the structure should we consider safety issues during construction, and where should we consider actual construction issues when drawing. It can be constructed upon arrival and meets the specification requirements, achieving standardization of design and construction. Without this internship, I might have just copied the drawings from the book, and would not have considered too many issues, let alone whether my design can be constructed.

Although the construction site is hard, you can learn some practical things and exercise your practical ability to solve problems.

For example: the wall will also shift, the height of the stairwell is not enough when setting up the stair formwork, there will be slight changes in the size and elevation of the balcony and bay windows, and many other problems that may occur during the project. Only through practice can we find the cause of the problem and find a solution.

In addition, by helping the document clerk fill in some information, I also have a certain understanding of filling in construction information, knowing when to fill in what information, who needs to sign, etc. These are things I have never been exposed to before. of.

Summary

This internship gave me a certain understanding of construction safety, etc., which opened a way for us to learn professional knowledge in the future. We learned through observation and inquiry. Learned a lot of things we didn't know. Every construction unit has the slogan "Safety First". As engineering personnel, we should try our best to avoid safety accidents. We should not only strictly enforce rules and regulations, but also instill safety knowledge into employees and be responsible for their life safety. Safety officer personal summary 2

In 20XX, looking back on this year, we have strictly followed the work set at the beginning of the year in a harmonious working environment, under the trust of the leaders of Tianyu Project Management Company and the correct leadership of the project department manager. The goal is to fully implement the policy of "safety first, prevention first" and put improving workers' safety awareness in the first place! Adhere to humanized management and strengthen safety production management on the premise of "knowing with reason and acting with emotion". In 20XX, I cherished the position of safety officer very much and devoted myself to work with a positive attitude. This year, I was rated as a red card construction site in Jinan City, Shandong Province by the Shunhe Street Triangle. This made me feel very fulfilled because of my efforts. It pays off. The work of the past year is summarized as follows:

1. Take "being a qualified safety officer" as the motivation for your work, focus on loving the company and the project department in your thoughts, and think about the interests of the company in your actions. Be proactive, assist the project manager in conscientiously implementing the safety production responsibility system, formulate safety reward and punishment regulations, and provide constructive suggestions to clarify the safety responsibilities, obligations, and rights of both parties when signing a labor contract with the construction team. Strengthen the implementation of relevant production safety laws, regulations, rules, systems and regulations, do a solid job in safety training, conscientiously fulfill the commitments in the "Safety Responsibility Letter", and strive to achieve the purpose of three-level safety production education. In management, we must be dedicated and devoted to our work, and pay attention to improving employees' safety awareness and the cultivation of their own professional ethics. Through safety day activities and production operation analysis meetings, potential safety hazards have been eliminated in the bud. state. Organize employees to learn and improve safety skills and knowledge, learn from the analysis and summary of accident lessons, improve their professional level, and increase employees' safety awareness. As long as it is conducive to the development of the company and the work of safe production, I promise to work hard with 100% enthusiasm for work. Any excuse.

2. Under the correct leadership of the project department manager, first of all, strictly control education and conduct safety education for new workers and transferred workers, requiring each team to make a safety technical briefing before arranging production. After working safely, improve workers’ safety awareness as the first priority. After entering the construction site, first understand the situation of "power, access, water, communication, ventilation, and one level". A. Electricity: confirm the location and model of the power distribution room in advance. Buildings generally use TN-S and five-core cables. Wire gauge. B. Access: pre-buried pipeline locations, line pipes, water pipes, sewage pipes, etc. C. Water supply: Consider setting up several valves in advance. The location of the valves and the monthly water consumption should be clearly recorded. If the team is decentralized, ask the team to sign and keep a copy for your own record. D: Communication: Today is a network society. All files are transferred via the Internet, which saves time and labor. Remember the network cable maintenance phone number. D. Ventilation: Gas and heating are included, but Jinan has not implemented it yet. E. One level: The construction site must be level.

3. Carefully carry out functional supervision of equipment and personnel on the construction site, and eliminate habitual violations during planning, layout, inspection, summary, and assessment in safe production, resolutely eliminate barbaric operations, and adhere to Punish reckless behavior, so that you can be fully aware of the operation of the equipment you are responsible for, and ensure that it operates well.

Timely eliminate major hidden dangers that threaten production safety and strengthen the management of weak links.

4. Full-time personnel for equipment operation at the construction site are responsible for specific operations. I personally guide the specific arrangements and inspections of the work, and keep abreast of the safe production operation of the equipment. Conduct in-depth on-site inspections of equipment production safety, maintenance and repair of equipment every month, analyze and investigate equipment defects, and supervise equipment operators to conduct certification compliance and pre-shift inspections to ensure that equipment can operate healthily and stably. And complete other tasks assigned by superior leaders in a timely manner.

5. Actively take the lead in doing the "three inspections and three in place". In addition to welcoming the safety department personnel to conduct regular safety production inspections, the company organizes a regular inspection every month, and the time is set at the beginning of each month. From the 25th to the 30th; the project department will conduct inspections twice a week, and there should be special records. The team will organize inspections before work every day, and record the inspection results in the "On-duty Inspection Record Book" for easy reference. The key is Implement and correct safety issues in place to ensure that safety production management is as vertical as possible to the end and horizontally to the edge.

6. Do seasonal safety inspections:

Before summer: prevent heatstroke and cooling; hygiene; prevent heatstroke.

Thunderstorm season: Set up the station; prevent floods; protect against lightning; inspect equipment for tipping; check for electrical leakage, etc.

Holidays: Inspections on fire protection, public security, civilized sanitation, etc., and strive to have plans and explanations for everything, make safety work arrangements in advance, and truly focus on prevention.

7. I actively cooperate with the company management to inspect work at the construction site, and carefully fill in the "Safety Production and Civilized Construction Inspection Sheet" for each inspection record in triplicate, and give one copy to the unit under inspection. One copy should be handed over to the project department manager, and the other should be handed over to the safety officer for record keeping. While filing, strict rectification and implementation will be carried out.

8. The project department accepts monthly safety production inspections from Party A, and inspects construction in accordance with the "Two Standards and Five Standards" of the Ministry of Construction:

JGJ46-2004 Construction Site Environment and Health Standards.

JGJ59-1999 Construction Safety Inspection Standard.

JGJ88-1992 Safety technical specifications for gantry and derrick material hoists.

JGJ80-1991 Technical specifications for safety of construction work at heights.

JGJ46-2005 Technical Specifications for Temporary Electricity Safety at Construction Sites.

JGJ30-2001 Safety technical specifications for steel pipe scaffolding with fasteners in construction.

JGJ28-2000 Safety Technical Specifications for Portal Steel Pipe Scaffolding in Construction.

Conduct evaluation. The top three will be rewarded based on the evaluation, and the bottom three will be punished. The monthly inspection results are reported in writing and reported to the rear company headquarters.

In the safety inspection activities, I carried out my work conscientiously and down-to-earth with strict, detailed and practical requirements, achieved good results, and received praise from Party A, project management, and supervisors.

In short, I conducted an in-depth investigation of potential safety hazards at the site, and adhered to the "two strict" management of potential safety hazards, that is, strict management and heavy penalties, and strict prevention of perseverance. Implement the management concept of "strictness is close, laxity is harmful" into daily safety management work.

Although certain achievements have been achieved in safety management work in 20XX, there is still a certain gap with the leadership requirements. In the new year, I will further follow the leadership’s requirements and instructions and pay close attention to Safety management, work hard to achieve accident-free construction throughout the year, ensure to obey the leadership arrangements, conscientiously complete the tasks assigned by the leadership, everything is for the sake of Shandong Tianyu Project Management Company, do your job well, I hope colleagues can communicate more and understand more, and be proactive Take action, unite as one, be dedicated to your job, work hard to develop, and work hard to achieve the company's 2011 annual goals with fuller enthusiasm and higher morale.

Safety Officer Personal Summary 3

The main work in 20xx is as follows:

1. Strengthen daily safety inspections, focus on inspections of positions prone to accidents, and ensure daily inspections Once, temporary electricity and flammable items are also inspected daily, hidden dangers are found to be rectified in a timely manner, and fire extinguishers that cannot reach the pressure are replaced uniformly

2. Strengthen polite construction management, and monitor all construction workers in the construction industry. Materials and sanitation require materials to be classified and stacked neatly, and sanitation personnel to clean up, so that the work is completed, materials are quiet, and the site is clean.

3. Do a good job in on-site 5S work, and designate responsible persons for all equipment.

Existing shortcomings

1. Problems in safe production and polite construction: some safety data are incomplete, electricity is used indiscriminately at the construction site, and there are no supervision requirements for the construction site. Not strict, not high standards.

2. The enthusiasm for learning professional knowledge is not enough, the work is not careful and responsible enough, and mistakes are often made in some work. The main reason is that the degree of ideological emancipation is not enough, and the organizational communication ability is still slightly lacking.

3. The work involved is diverse and complex, and it takes time to learn.

4. I am not bold enough in my work. I need to change my working methods and constantly innovate and improve in the process of continuous learning.

5. 20xx is coming to an end, although some work has been done this year in terms of safety production and polite construction. Some achievements have been made and some experience has been accumulated, but there are still many problems. With the arrival of 20xx, I must seriously sum up experience, overcome shortcomings, and strive to do a better job in my work in the future.

Next year’s work plan

1. Study hard, strive to improve your own quality and work potential, and complete your job with due diligence and responsibility

2. Carry forward the spirit of hard work and hard work Be spirited, not afraid of hardship, take the initiative to find things to do, adapt to the work environment as soon as possible, devote yourself to work proactively, hone your will and grow your talents in complex work.

3. Carry forward the tireless enterprising spirit, strengthen learning, be brave in practice, pay attention to collecting all kinds of information while studying, pay attention to learning methods, correct learning attitude, and improve learning efficiency. Work hard to cultivate yourself to have a solid theoretical foundation and a down-to-earth work style. Strive to do a good job and establish a good image.

4. Be a good safety officer. Propose rational rectification and solutions to various violations and problems in a timely manner, and cooperate with leaders of various departments to complete assigned tasks.

In short, in the past year, I have done some work and achieved some results, but there is a certain gap from the requirements. I will continue to sum up experience, strengthen learning, update concepts, and improve all aspects of my work. Job potential. With a highly responsible attitude towards work and career, be down-to-earth and do all the work conscientiously. Personal summary of the safety officer 4

I reported to the shipyard Jingcheng Company on September 25, XX. I was a new employee who had never worked in the shipyard. I started to process the entry process in the first few days after joining our company. For related procedures, I officially joined the company's safety team on October 1st and have been doing safety management internships so far. After three months of safety management internships, I have slowly learned about our company's safety management system and become familiar with the on-site safety management model and daily work. Key points, main points, now I will summarize my recent work situation and briefly elaborate on the work plan for XX:

After more than three months of on-site internship and the careful teaching of the master, I Now I have a certain understanding of on-site safety management work, and I can handle some problems related to our work found on-site. I have learned to fill in the "Painting Declaration Procedure" and the "On-site Safety Issues Feedback Form" by myself. I have obtained These improvements are completely inseparable from the leaders and masters of our company. It is their careful teaching and help that enabled me to make such progress. I am very grateful to them for their selfless help in my work.

As soon as I came to the safety management department, I followed my master to the production site all day long to deal with some abnormal problems and safety emergencies. At that time, our company was building (57000t-19#, 17#, 21# , 24#, 19100t-5# ship), I began to understand the basic situation of shipbuilding, and became familiar with the daily work focus of our safety officers and the daily monitoring focus of our company's ships under construction. Since the safety director of our company is also my "passenger, "Help and guide" the master, he introduced me to the on-site safety management work, and I began to understand shipbuilding. When I entered the shipbuilding company, I put up the no fireworks warning sign, raised the warning flag, and made fire prevention, explosion prevention, and ventilation the main tasks. I grasped and understood the workflow and steps of the painting operation, and took notes and work records in this regard. After painting, it is necessary to clean up the finished materials. When painting in a closed cabin, ventilation should be strengthened. The equipment must be explosion-proof. If any fire is found to conflict with the painting during the spraying process, , promptly notify the project and plant safety and technology department for coordination and processing. During the learning process, I also found that some employees exposed some uncoordinated and irregular phenomena at work, such as: employees did not wear safety helmets, safety belts, labor protection supplies were not worn in the standard, etc., and there were no hanging " "No Fireworks Warning Sign" In response to these habitual violations, we communicated with their responsible teams and responsible persons in a timely manner and adopted certain methods to deal with them.

At the beginning of December, because our company’s 57000t-16# ship was going to be launched for construction operations, I learned a lot with the help of my supervisor. Although I have experience as an intern on the slipway, I I think that what I knew before is not comprehensive enough and there are still a lot of things to learn. So far, I have been very interested in the scaffolding and warehouse ventilation issues of our factory, and I have been collecting relevant information in my spare time. There is indeed room for improvement.

Regarding the work plan for XX, I will continue to learn safety management knowledge while conscientiously completing the tasks assigned by the leadership, humbly ask for advice, improve myself in all aspects, be competent in my own safety management work, and make myself as soon as possible Join our safety management department and I will continue to track the improvement of scaffolding construction and warehouse ventilation issues in our factory, and make my own efforts to better provide a safe and comfortable working environment for our employees, and achieve greater success for our company. Make your due contribution to the glory of the country.

The above is a summary of my work during the internship and future work plans since I joined the work. If there are immature and incomplete understandings, I still hope that the leaders will criticize and correct them. Personal Summary of Safety Officer 5

Since I have been engaged in safety work, with the care of leaders at all levels and the help of colleagues, I have conscientiously implemented the "Safety Production Law" and the policy of "Safety First, Prevention First" We must adhere to the safety production work policy, fulfill our safety production responsibilities, do every job carefully, accumulate certain work experience, and achieve certain results.

In the past year, the safety work has centered on the management system of "safety standardization" and was mainly carried out from the three aspects of occupational health, safety and environmental protection. When I first started working in safety, my work experience was not very rich, and there were always problems of one kind or another in my work. In order to become familiar with various businesses in a short period of time, I continue to enrich myself by learning safety knowledge through various channels, and through "safety standardization" work, I gradually become a qualified safety officer.

The following is a brief introduction to the main work I am doing and my plans for future work.

1. Carry out various safety work in accordance with the requirements of the "Safety Standardization Specifications for Hazardous Chemicals Business Units"

In September last year, I participated in the "Hazardous Chemicals" event held by the Provincial Safety and Technology Center The first training course on "Safety Standardization of Business Units" and the "Safety Standardization Specifications for Hazardous Chemical Business Units" are in the trial stage. It has made clearer and more specific provisions on various aspects of safety production.

As a safety officer, I actively studied the "Standards" and compiled a detailed "Safety Standardization Implementation Plan" based on 10 A-level elements and 51 B-level elements, and gradually carried out work according to these elements to make the content of the standards It truly runs through the production activities and plays its due role to promote the safe production of our factory.

In July, the safety standardization assessment team conducted a self-evaluation of its work and received a good score of 98 points. After the self-evaluation, the non-compliant items in the self-evaluation were rectified one by one, and successfully passed the acceptance of the Provincial Safety and Security Center from December 2 to 3.

2. Take root in the front line of production and learn from the experience of all parties.

In the new year, I hope that I can have more opportunities to devote myself to the front line of production, because there can provide Sufficient nourishment for my growth. Only by truly taking root in the front line of production can I have a deeper understanding of occupational health, safety and environmental protection and promote better work. Only by communicating more with front-line workers in production and extensively absorbing experience from all parties can I discover problems in a timely manner and expand my horizons. Work ideas to truly realize the coordinated development of occupational health, safety and environment.

3. Handle interpersonal relationships correctly

In daily work, there are many exchanges with superiors, colleagues in agencies, and workshop personnel. In the process of daily work, there may be such situations Or problems like that, friction will inevitably occur. This requires me to correct my attitude and actively avoid such problems. It is easy for young people to be impetuous at work, and they may not consider things thoroughly when dealing with problems, and do irrational things on impulse. I will try to avoid this in my future work. Correctly handle the relationship with other colleagues, and be proactive and optimistic in helping colleagues in difficulty.

IV. Suggestions for the future work of chemical plants

I hope that safety management will be more humane. During the inspection of the workshop, not only deficiencies should be discovered, but also more advantages should be discovered. Encourage employees to make suggestions that are helpful for safety work and reward them appropriately.

Continuously carry out safety publicity and education to employees, enhance employees’ safety awareness, and truly transform them from “I want safety” to “I want safety”.