What are gundam model water stickers, metal stickers and luminous stickers? How to post it? Are these three repetitive or coexisting?

1. Find the position to paste according to the instructions in the manual, then paste the piece of water to be used, find a small dish with a shallow bottom, and put in water with a water temperature of 30-40 degrees.

2. Put the plaster in water and soak it completely.

3. After the water sticker is separated from the paper, stir the water sticker with a cotton swab and slowly move the water sticker to the position where it needs to be pasted.

4. Adjust the position when there is water, and then gently suck the water clean from one side with a cotton swab.

5. When absorbing water, gently press it until there are no bubbles and the water sticker is completely attached to the model parts. After sticking all the water stickers, you can apply matte paint to protect the paint layer and water stickers from falling off. If there are undulations in some positions, you should use a water paste softener to make the water paste more suitable for that position.

Second, luminous stickers:

After pasting, it can shine in dark places, especially suitable for pasting eyes or some places that need to shine.

Usage: It is difficult to cut out the required shape with tools such as pen and knife, and then peel it off and paste it.

? Third, the metal paste:

The color is similar to the metal sticker, and it is relatively thick, which mainly creates a metal texture for the pasted model. The disadvantage is that the firmness of paste is not as good as that of water paste, and it is easy to roll after a long time.