The copier is very loud. what's up

There may be many reasons why the copier is so loud. Here are some possible reasons:

1. Machine aging: The photocopier will wear out parts after being used for a long time, resulting in more noise caused by friction when the machine is running.

2. Scanner: When scanning documents, the scanner needs to move the scanning head at high speed to scan, which will produce a lot of noise.

3. Toner cartridge: If the copier does not replace the toner cartridge for a long time or uses fake and inferior toner cartridges, it will cause abnormal sound of the machine.

4. Articles are stuck in the machine: It is possible that some small articles accidentally fall into the copier during daily use and are brought into the machine to cause abnormal noise.

5. The machine table is uneven: if the copier is placed on the uneven table, it will cause the machine itself to vibrate, and then it will produce a lot of noise.

To solve the problem of particularly loud sound in the copier, the following methods can be considered:

1. Regular maintenance: clean and maintain the copier regularly, replace parts, and extend the service life of the machine.

2. Use high-quality toner cartridges: use original toner cartridges, or choose regular brands to ensure the quality of toner and avoid using counterfeit and shoddy products.

3. Correct use: When using the copier, special attention should be paid to avoid sudden folding and paper jam. This will increase the probability of adding blocks to the machine.

4. Adjust the position of the machine: ensure the level and stability of the copier table, and scientific placement and reset can avoid the noise caused by machine vibration.

5. Regular maintenance: If the machine is used for a long time, it is recommended to maintain it regularly. In this way, the problems of the machine can be found in time, and the operation efficiency of the machine after maintenance is more efficient and the noise is less.