? How to prevent moisture and fire on the floor

Floor moisture-proof and fire prevention

The floor is more easily damaged, which greatly bothers many users. Actually, protecting the floor is very simple. If you can prevent moisture, fire and scratches well, your floor will be healthy and bright.

Part 1: The floor is moistureproof when the typhoon strikes in summer.

Summer is the high season for typhoons, and there are often violent storms. In this season of frequent weather changes, have you done a good job of moistureproofing the floor? The moistureproof of the floor can't be ignored. Take moisture-proof measures to keep your floor bright at all times.

Understanding Floor Humidity: Analysis of Common Floor Humidity

When the floor is wet, it will be easily moldy and deformed. Don't think that only the floor will get wet in spring. Due to the unstable weather in summer, there are often typhoons and rainstorms, and the wooden floor is easily affected by sudden weather. Therefore, it is also a big problem to prevent warping in summer. Many people's floors have damp phenomena such as mildew.

Expert advice: wet emergency response measures

If you find a small amount of mildew on the floor surface, you can mix it with warm water and bleach at a dilution ratio of 1:3 in time and wipe it with a soft rag. Pay attention to the concentration of bleach should not be too high. If the concentration is too high, it will destroy the waxing on the floor surface and make the friction part of the floor fade. If the local floor is mildewed, the mildewed floor should be removed immediately and replaced with a new one, so as to avoid mildew infecting other intact floors and causing mildew in a large area.

Do a good job in daily maintenance: learn how to prevent moisture.

Always wax to keep it bright, and the most important thing in the daily maintenance of wooden floors is waxing. After the wooden floor is used for a period of time, it needs to be waxed again, so that not only can the water left by the construction be distributed, but also the service life of the floor can be extended. In addition, the floor should be waxed once every quarter to keep the floor surface bright and waterproof.

Activated carbon prevents the floor from being wet. It can keep the floor in a good humidity environment. Because of the dual functions of moisture absorption and moisture retention of activated carbon (two-way humidity regulation), the floor will not dry and crack after long-term use, and the floor will not be too wet and moldy when it is wet; This effect is more obvious in rainy season.

Part2: Take precautions at home and pay attention to floor fire prevention.

As an important paving material, the floor covers every corner and plays an important role in the fire. In the fire, more than half of people died from the toxic gas released by the burning of building materials. In a fire, the fire-retardant floor can give full play to its fire-resistant characteristics and win one more minute of life. More and more attention has been paid to the fire prevention measures on floors.

What often happens: it is easy to catch fire near an open flame.

Every day, cigarette butts, matches and other kindling accidentally fall on the floor, the surface of the floor is damaged or burnt, and fires often happen inadvertently. If fire prevention measures are taken at ordinary times, fire can be prevented to a certain extent, and if fire prevention measures on floors are done well, it will also greatly hinder the fire.

Facing the challenge positively: the treatment method of burning floor

If the burned area is only slightly discolored, you can drop two drops of cooking oil. After the cooking oil is completely dried (about 1-2 days), gently wipe it with a dry cloth, which can basically restore the original appearance. If the paint layer is damaged, it is recommended to wipe it with metal cotton dipped in oil, or it can be restored. If the surface is sunken, you can put it in the burnt place with wood powder and glue and let it dry naturally. If the area is large and the damage is deep, it is recommended to replace it.

Nip in the bud: learn fire prevention tips.

Flame retardant floor, fiberboard, particleboard, plywood, etc. Paint or impregnated paper is used as decorative material. Through flame retardant treatment, wood composite floor with certain flame retardant grade and flame retardant function is obtained. It reaches the flame retardant standard of B 1 grade and the smoke poison grade standard.

In addition to taking corresponding fire prevention measures for the floor, it is also necessary to meet the requirements of fire prevention during installation. Fire prevention measures in daily life are even more indispensable. Pay attention to the open fire in the home or the hidden danger that can produce open fire. Stay away from wooden furniture, such as floors.

Part III: It is very important to protect the floor and prevent damage.

The floor is in direct contact with various objects, so its surface is easily damaged. Especially some hard furniture and household appliances. If you accidentally let a hard object collide with the floor, it will easily lead to damage and affect the overall effect. So how do we prevent and deal with floor damage?

Frequently analyzed situation: the floor is easily damaged by collision.

Solid wood floors are easily damaged, and even the smallest gravel can easily wear the color of the surface of solid wood floors and leave traces. Especially for heavy furniture, after collision, the position where the bottom touches the floor is easy to scratch, and even seriously damage the floor.

There are ways to damage the floor: emergency measures should be done well.

If the scratch is deep, it can be treated with special solid repair wax. Heat the soldering iron, heat it with one or two strip-shaped solid repair wax and the soldering iron, adjust it to the required color, then fill it in the scratch of the floor, compact it, take out the protruding part with a blade after 5-8 minutes, and finally paint it with paint similar to the color of the floor.

Reduce floor damage: There are some actions to prevent damage.

The floor should be kept clean at all times. It is best to put a mat at the door and put on flat slippers before entering the room to reduce the erosion of the floor by gravel. Pay attention to floor cleaning, regularly clean and vacuum the floor to prevent sand or friction dust from accumulating and scratching the floor surface.

Generally, in order to avoid the damage of furniture feet to the floor, it is recommended not to move large and heavy furniture as much as possible. If some furniture moves frequently, such as sofa and coffee table, you can put a piece of paper or mat at the foot of sofa and coffee table, so as to avoid damage to the floor.

The above contents are related introductions about floor moisture-proof and fire prevention that I brought to you, hoping to help you.