Rationalization Suggestions on Classical Energy Saving and Consumption Reduction

Pursue green fashion and embrace green life. The following are my reasonable suggestions on energy saving and consumption reduction, hoping to help everyone!

Classical rationalization proposal for energy saving and consumption reduction 1 1. Maintenance:

1, expensive spare parts should be repaired, and they should be repaired instead of scrapped because of local damage;

2, save materials, maintenance should be truthfully prepared, reduce unnecessary waste;

3. Maintenance personnel are fully equipped to train a qualified team, shorten maintenance time and quality and improve efficiency;

4, to ensure that the mechanical and electrical equipment intact rate reached more than 95%;

Second, the operation:

1, educate employees to operate in strict accordance with the operating procedures to ensure the safe and normal operation of the equipment;

2, personnel and positions, strengthen the sense of responsibility, avoid operational mistakes, and increase production costs in disguise;

3, establish the idea of ownership, often check the equipment, shift, should be taken seriously;

4. Effectively use resources, prevent the system from idling, reduce equipment wear and improve the awareness of power saving in the whole plant;

5. Offices and other places that don't need ever-burning lamps need effective management to avoid wasting electricity;

Third, management:

1, tap the potential, raise awareness, strengthen basic management, and put measures in place;

2. Increase secondary measurement and implement reasonable management;

3. Strict assessment, clear rewards and punishments;

4, advanced management, pays special attention to the plan, pays special attention to the plan implementation, strengthen the supervision of indicators.

Fourth, standardize material management and storage:

1, prepare and report the material plan, and strictly examine and approve the material plan. The monthly material plan of each workshop shall be strictly reviewed by the factory audit team, and purchased by the supply department after being signed by the factory director. The material plan is based on the actual situation on site and the principle of economy and sufficiency to ensure the normal production;

2. Strengthen warehouse management, establish and improve account books, ensure that all items are consistent with accounts, cards and materials, resolutely ban overstocked items in small warehouses in workshops, and do a good job in maintaining equipment and materials;

First, control every expenditure. All departments should better control costs reasonably;

Second, make good use of every employee. Reasonable division of labor, improve work efficiency and enthusiasm, improve sense of responsibility and work accuracy, and reduce work mistakes;

Third, do a good job in every business. Communicate with merchants more, actively solve practical problems for merchants, provide warm and thoughtful services, report the problems raised by merchants to relevant leaders at the first time and make handling opinions within 24 hours;

Fourth, narrow the gap. Departments and people should communicate effectively in time, eliminate work obstacles, put themselves in their own shoes, support each other and create a harmonious working atmosphere.

5. Save every kilowatt hour. 1, lighting, insist on turning off the lights, put an end to "daytime lights" and "ever-burning lamps", and use energy-saving lighting lamps; 2, air conditioning, reasonable indoor temperature, air conditioning temperature is not lower than 26℃ in summer, winter is not higher than 20℃, no air conditioning, open the air conditioning to close the doors and windows, advocate less open air conditioning for an hour every day; 3, office equipment, computers, printers, photocopiers and other office automation equipment to avoid long-term standby, reduce standby consumption, turn off all indoor power switches before work;

Sixth, save every drop of water. Avoid turning on the tap and running water, get into the habit of turning off the tap at will, and turn off the tap when squeezing hand sanitizer and detergent;

Seven, save every piece of paper. Advocate paperless office, reduce the frequency of printing and faxing paper documents, advocate double-sided paper, and advocate the reuse of waste paper. The waste paper printed and copied by all departments should be actively recycled to avoid revealing company secrets;

Eight, save oil per liter. 1. Strengthen the daily vehicle management and arrange the vehicle dispatching tasks reasonably. The vehicle department needs to apply to the office for comprehensive deployment in advance; 2. Maintain vehicles in time to reduce the occurrence of vehicle failures; 3. Promote the use of bus cards. Unless there is an emergency or the goods need to be transported, the company can send a car. When employees go out, they should try to use the bus commuter card to travel by bus. Without special circumstances, it is forbidden to use the bus commuter card to take taxis and shop.

Nine, save every penny of office expenses. Choose a reasonable office supplies manufacturer, purchase high quality and low price office supplies, and reduce the procurement cost of office supplies;

Ten, repair every piece of waste that can be used. For faulty equipment, try to repair the old and make use of the waste, tap the potential to increase efficiency and repeat benefits.

Classical rationalization proposals for energy saving and consumption reduction Chapter 2 advocates controlling every expenditure. All departments should reasonably control the cost, which is 5%-8% lower than that in 2009;

Advocate the use of every employee. Reasonable division of labor, improve work efficiency and enthusiasm, improve sense of responsibility and work accuracy, and reduce work mistakes;

Advocate the adoption of every good strategy. Strengthen management, reform and innovate, reasonably improve working methods and technological processes, advocate small inventions and small creations, and improve labor productivity;

Advocate to be a good customer. Communicate with customers more, actively solve practical problems for customers, provide warm and thoughtful services, report the problems raised by customers to relevant leaders at the first time, and make handling opinions within 24 hours;

Advocate narrowing the gap. Communication between departments and people should be timely and effective, eliminate work obstacles, strengthen empathy, support each other and create a harmonious working atmosphere.

Advocate saving every kilowatt hour:

1, lighting, insist on turning off the lights, put an end to "daytime lights" and "ever-burning lamps", and use energy-saving lighting lamps;

2, air conditioning, reasonable indoor temperature, air conditioning temperature is not lower than 26℃ in summer, winter is not higher than 20℃, no air conditioning, open the air conditioning to close the doors and windows, advocate less open air conditioning for an hour every day;

3, office equipment, computers, printers, photocopiers and other office automation equipment to avoid long-term standby, reduce standby consumption, turn off all indoor power switches before work;

Advocate saving every drop of water: avoid turning on the tap and running water, develop the habit of turning off the tap at will, and turn off the tap when squeezing hand sanitizer and detergent;

Advocate saving every piece of paper: advocate paperless office, reduce the frequency of printing and faxing paper documents, advocate double-sided paper, and advocate recycling waste paper. The waste paper printed and copied by all departments should be actively recycled to avoid revealing company secrets;

Advocate saving oil per liter: 1, strengthen daily vehicle management, and reasonably arrange driving tasks. The car department needs to apply to the office in advance for comprehensive deployment;

2. Maintain vehicles in time to reduce the occurrence of vehicle failures;

3. Promote the use of bus cards. Unless there is an emergency or the goods need to be transported, the company can send a car. When employees go out, they should try to use the bus commuter card to travel by bus. Without special circumstances, it is forbidden to use the bus commuter card to take taxis and shop.

Advocate saving every penny of office expenses: choose reasonable office supplies manufacturers, purchase high-quality and cheap office supplies, and reduce the procurement cost of office supplies;

Advocate the restoration of all available waste. For faulty equipment, try to repair the old and make use of the waste, tap the potential and increase efficiency, and persist in reusing those that can be reused.

Classical rationalization proposals for energy saving and consumption reduction Part III Energy saving and consumption reduction Part I: Using thermal insulation materials.

36% of the world's energy consumption is on the heating and cooling of houses. In fact, thermal insulation can save a lot of energy, which is illustrated by the "zero-energy residential" model houses in Switzerland and Germany. From the polyurethane "external thermal insulation system" coated on the outside of buildings to the closed "super glass" windows, many thermal insulation methods have been invented. Advanced thermal insulation measures follow the economic law of rate of return: if sufficient thermal insulation measures are taken, heating and air conditioning equipment can be reduced or cancelled, thus achieving the purpose of energy saving and cost reduction. Studies have shown that an environmentally friendly working environment (one that does not require frequent heating or air conditioning) can improve the labor productivity of employees and reduce the disease rate of employees.

Energy saving and consumption reduction Part II: Replacing light bulbs

20% of the world's electricity is consumed in lighting, or the energy consumed by lighting is equivalent to burning about 600,000 tons of coal every day. 40% of electricity is consumed by old incandescent bulbs. The energy-saving fluorescent lamp saves 70%~80% electricity compared with incandescent lamp, and its service life is 10 times longer than incandescent lamp. Phasing out incandescent lamps by 2030 can save the power generation of 650 power plants and reduce the carbon dioxide emitted into the atmosphere by 700 million tons every year.

Energy Saving and Consumption Reduction Part III: Improving Household Heat Exchangers

Heat exchangers such as water heaters, heaters and air conditioners have the lowest energy efficiency, and only a part of energy is really used to change the temperature. Most new houses in Sweden have switched to geothermal heat pump heating; George Bush's ranch in Crawford, Texas also uses heat pumps for heating and cooling. These systems consume much less conventional energy (these systems use liquefied natural gas for heat exchange in a closed cycle, and only need a small current to keep the compressor running). Some countries use subsidies to start the market, such as Japan, which installed 1 10,000 platform heat pumps to heat bath water and radiators in the past two years. Fourth, save energy and reduce consumption: improve energy consumption equipment in factories. From steel mills and aluminum smelters to pulp mills and paper mills, the global industrial sector consumes about 1/3 of energy. The industrial sector has great energy-saving potential. Since 1980s, Japan's Mitsubishi Heavy Industries and other iron and steel enterprises have been in the leading position, using the waste heat of steelmaking furnace to generate electricity, saving more than 70% energy.

Fifth, save energy and reduce consumption: drive environmentally-friendly and energy-saving cars.

14 of the world's energy-including 2/3 of the oil produced every year-is used for transportation. Some energy-saving measures do not cost money. For example, keeping tires properly inflated can improve energy efficiency by 6%. Hybrid cars can further increase the mileage by 20%. Modern direct injection turbocharged diesel engines, such as Volkswagen Passat TDI, and diesel-electric hybrid engines being developed by Peugeot Automobile Company of France and DaimlerChrysler Company of Germany, can achieve good energy-saving effects. Sixth, save energy and reduce consumption: promote the energy-saving effect of refrigerators. More than half of residents' electricity consumption is used for household appliances, and one-fifth of global carbon dioxide emissions are caused by residents' electricity consumption. Since 1980s, manufacturers have increased the energy efficiency of household appliances such as refrigerators by 70%, but there is still room for further improvement.

Energy saving and consumption reduction 7: Try to solve the investment cost of energy saving.

Who says you have to pay for all the investment in energy saving and consumption reduction? Energy service companies can pay the required equipment renovation costs and then deduct them from the annual savings of customers. For example, Beijing Shenwu Thermal Energy Technology Co., Ltd. specializes in energy-saving combustion equipment renovation projects of industrial furnaces. SHEN WOO invested in installing a heat exchanger for a steelmaking plant to preheat the air entering the steelmaking furnace, which greatly reduced the fuel cost of customers. SHEN WOO Company extracts a certain share from the cost saved by customers, thus making SHEN WOO Company and this steel mill profitable.

Save energy and reduce consumption from me, and make persistent efforts to control costs.

Save energy, reduce consumption, reduce pollution and increase efficiency, protect the environment and benefit the country and the people.

It is everyone's responsibility to save energy and reduce consumption.

Reduce waste and damage, improve quality, save energy, reduce consumption and increase efficiency.

Reduce the cost bit by bit and increase the income every minute.