Method for replace apron of semi-automatic washing machine

Semi-automatic washing machine is an important equipment for home washing. After being used for a long time, especially in the washing process, problems will inevitably occur due to wear or aging, such as the aging of the apron of the washing machine. As time goes by, the apron of the washing machine will become brittle and hard due to long-term use, which will not only cause water leakage, but also affect the washing effect of the washing machine. At this time, it is necessary to replace the apron.

The replacement method of the apron of semi-automatic washing machine is as follows:

Step 1: Unplug the apron

Since the operation of the washing machine cannot be separated from the power supply, the first step when replacing the apron is to unplug the apron. For the sake of safety, it is suggested to put "Danger!" on the washing machine. Do not turn it on "and other prompt slogans.

Step 2: Dismantle the washing machine shell

Be careful when disassembling the washing machine shell, especially when small tools such as screwdrivers are needed. Try to choose the appropriate size and type when selecting tools. Find the relevant screws of the washing machine, unscrew them one by one, and then slowly untie the shell of the washing machine.

Step 3, remove the front cover of the washing machine

After removing the outer shell of the washing machine, you can see some internal accessories, and you need to continue to remove the front cover. First find the screw of the front cover, unscrew it, and then gently lift the front cover. However, it should be noted that because the washing machine has been used for a period of time, the front cover will have a certain weight, so be careful to operate it.

Step 4, remove the washing tub and apron

Now you can see the working surface inside the washing machine, and the apron is just fixed in the washing tub, so you need to remove it first. First, find the fixing nut under the washing cylinder, disassemble it with a screwdriver, and remove the cover plate of the fixing ring. Then, find the fixing hook connecting the apron with the washing cylinder and disassemble them one by one.

Step 5: Install a new apron

When replacing the apron, you need to select a new apron according to the size of the old apron. Press the components of the washing cylinder again in order and fix the nuts.

Step 6: Assemble the washing machine

Put the disassembled washing machine parts back in the corresponding position and order, then splice the shell and fasten it with screws.

finally, plug in the power supply, start it and see if it can work normally, and the replacement of the apron is finished. Moreover, in order to maintain the running stability and effect of the washing machine, it is recommended to check all key components in the washing machine regularly every six months.