Did you say anything?

How to set up the computer, talk with the microphone, and there is no sound in the stereo. WINXP:

1. See if there is a volume icon (speaker) in the taskbar (lower right corner of the screen). If yes, skip directly to step 3.

2. start-> settings-> control panel-> sound and audio devices, select the "volume" tab, check the box in front of "put the volume icon in the taskbar", click the "ok" button below, and the "small speaker" in the taskbar will appear.

3. Double-click "Small Speaker" in the taskbar to open the "Volume Control" panel to see if there is a "Microphone" control bar. If yes, skip directly to step 5.

4. in the options menu-> properties-> volume adjustment column in the upper left corner, select the column of "play"-> "show the following volume control" and check the box in front of "microphone".

5. Uncheck the Mute check box in the Microphone control bar of the Volume Control panel.

WIN7:

1, start-> control panel-> hardware and sound-> sound (manage audio devices).

2. Select the Play tab, select Speakers, and then click Properties.

3. Select the Level tab. If the speaker in the Microphone bar is disabled (there is a small red circle in the lower right corner), click it to turn it on.

The microphone has sound, but the player has no sound. Well, reinstall the sound card.

Why is there sound in the microphone and stereo? What should I do? Right-click the speaker icon-Turn on volume control-Options-Properties-Mixer:

1. Select ~ ~ output from the drop-down box, check the microphone volume, and confirm to check the mute at the microphone volume (so that the microphone signal will not be output to the speaker).

2. Select ~ ~ ~ input from the drop-down box, check the microphone volume and confirm. Unmute the microphone volume and adjust it to the appropriate size. Enable microphone signal input into the program so that the other party can hear your voice.

In view of your question, I can only answer so much. I usually live in the love HIFI forum. If you have any questions, please come to the expert version of the love HIFI audio forum to find me.

There is no sound when my computer has a sound card installed. If I speak with a microphone and there is a sound, use the 360 driver to check it ~

YY: There is no sound when talking with the hardware microphone. 1: electrostatic problem of equipment.

2. Mechanical vibration problems will produce pulses.

solution

Problem 1: use a triangular plug with a ground wire to supply power to the host (the triangular plug in many families is not worthy of the name and does not have a ground wire); If this is the case, do it yourself: lead the current from the main engine to the ground with wires; Or go to the traditional metal tap water pipe, hehe; There is, dare not say, afraid of being scolded, that is, changing equipment, where is the reason. Hmm. How interesting

Question 2: Identify the place with the largest vibration, generate pulse (usually fan), and replace or adjust it.

The following are the possible reasons I didn't encounter:

After the wheat is removed, the microphone has abnormal sounds such as current sound and noise. This problem occurs in the following situations (there is a solution)

1。 Your microphone, whether the mix is up to the maximum.

Solution: Microphone, the mixing volume can be increased to 80% to 90%.

2。 Whether your microphone is in the enhanced state.

Solution: Remove the microphone. Because some sound cards don't support it.

3。 Is there a problem with the connection between your microphone and the computer host?

Solution: Disconnect the microphone from the computer host, then reconnect it correctly, and check for poor contact.

4。 Do you use speakers?

Solution: Use headphones. Be sure to use the speaker, and be careful not to point the speaker at the microphone (your computer room needs to be spacious and good).

5。 See if there is anything with magnetic field and sound wave around you.

Solution: Take away electrical appliances with magnetic fields (such as mobile phones and fans).

6。 Is there something wrong with your sound card or microphone?

Solution: Record a segment in the internal playback state.

7。 Is there any leakage on your computer motherboard?

Solution: use a wire to connect one end of the metal strip at both ends of the wire to the outside of the computer host, which is not the key metal part. Head down. (Special note: Never choose the wiring in a key part other than the computer host, and pay attention to the safety of you and your computer) 8. Whether your computer host accessories are loose or improperly installed.

Solution: Listen to your computer host to see if there is any abnormality (such as the fan is too loud and not running smoothly). ) and ask professionals to clean or debug for you according to the situation.

9。 Is your UC program installed incorrectly? Or the download is incomplete.

Solution: download UC, because of network or other reasons, the data is lost and the file is incomplete. Will cause discomfort in use. In addition, improper installation of plug-ins can also lead to exceptions. I suggest you reinstall according to my method: after you turn off UC, uninstall it in the control panel and download and install it again. UC 2005III official edition l should first make a good backup of important materials (chat records, emails, etc. ).

10。 If there is something wrong with your computer (for example, you need to clean up junk files, remove viruses and trojans. ) There will be abnormal noise. Network congestion and slow network speed can also lead to abnormal noise.

Solution: Do a good job in computer maintenance. The sound should be easy to hear when the network speed is not enough.

1 1。 Only when you connect to a friend's voice, if your voice is abnormal, it will be normal in the chat hall.

Solution: Please pay attention to whether either of you has turned on the internal amplifier or turned on the speaker. If yes, please turn it off. (When using the speaker, be sure to pay attention to the placement of the speaker and the surrounding environment. If not, please don't use them to chat for the time being. Ask friends around you who know the sound to help you solve this problem. In addition, one side of the firewall is set too high (including LAN users and Internet cafe users), and different broadband users (such as telecom and Netcom) will have some voice problems. This is difficult to solve.

12。 Whether your computer parts are wet.

Solution: If your computer host is placed in a bad environment, especially near the ground, it is easy to get wet. Please change a ventilated dry belt and blow it with a hair dryer to keep the machine running well.

13。 Your computer is a notebook computer.

Solution: 1 Due to the limitation of hand size, notebook computers can't compete with desktop computers in hardware, and the sound is generally not very good. 2。 Wireless Internet access has its limitations, and abnormal sound is inevitable. 3。 Notebook computers are generally equipped with built-in sound cards. Please turn it off when using, otherwise the sound will be abnormal.

14. It is recommended that audio users use a separate microphone.

Why is there no sound in my computer microphone? Is the microphone in the control panel mute?

How to set the microphone without sound? If there is no sound after the system is completed, it means that you haven't turned on the sound of Mike Feng. When the sound driver is installed, the microphone is muted by default. You fold several small speakers in half, click the option below and find the microphone option. If you don't have ChInese, look for a microphone or a back powder In (front powder in is also an option for a microphone, but it doesn't generally matter). See if it's mute. Remove the mute and try again.

Click the small speaker icon in the lower right corner-turn on the volume controller-options-properties-select recording to make sure that the microphone is checked or not ~ I plug it in front and plug it in the back, all of which are headphones with sound. You must first find out whether your microphone is connected correctly, that is, whether you have plugged it into the corresponding hole on the chassis. If plugged in, consider that the output of the earphone and the speaker cannot be used at the same time. So pay attention. "First, you can plug the microphone into the speaker to find the correct input and output interfaces. Second, click on the small speaker at the lower right and then come out for volume control. Then click the option attribute to find the microphone, tick in front, close the window, find the advanced control, and remove the tick before mute in the advanced part below the microphone bar. "

There is no sound in the microphone of W7 system. You mean you can't hear yourself on the loudspeaker. Right-click the speaker in the lower right corner, click the recording device-select the microphone that can be used-click Properties-click Listen, and tick the listening item.

How to set the microphone to have no sound? Dear ASUS users, hello!

According to your description, I suggest you refer to the following information:

You can debug the small red or white speaker in the lower right corner. If not, you can try to download the sound card driver of your corresponding model in official website. For the test, you can search for a tape recorder in the start menu in the lower right corner.

I hope the above information can help you! thank you

If the above reply still doesn't help you solve the problem, you can log on to ASUS official website:: vip.asus./impreale/imlink imlink.

Or call customer service for further consultation with engineers to help you solve the problem!