Please be specific about the job occupation and work content of the civil quality inspector, because this is my first time as a quality inspector.

Civil quality inspector is a staff member who carries out quality control, inspection and acceptance of a professional project in the project. It is also one of the five members of the building (documenter, builder, quality inspector, safety officer and material engineer). Strictly speaking, it is divided into two parts: one is the preliminary quality inspection of semi-finished components of building materials; The other step is to check the construction quality of the project.

Let's talk about semi-finished components of materials first: quality inspection and control of raw materials, semi-finished products and components needed for construction of engineering projects. Important orders can only be purchased after samples are submitted and checked and approved by quality inspectors. All raw materials entering the site shall have product certificates or technical specifications. Through a series of inspection methods, the obtained data are compared with the technical documents provided by the manufacturer, and it is found in time whether the quality of materials (semi-finished products and components) meets the quality requirements of the project. Once it is found that it cannot meet the engineering quality requirements, it should be purchased and replaced immediately to ensure the quality and reliability of the materials (semi-finished products and components) used. At the same time, the quality inspector will feed back the inspection results to the manufacturer so that he can master the relevant quality situation. In addition, according to the use and source of engineering materials (semi-finished products and components) and the specific situation of quality assurance information, the quality inspector can decide the depth of quality inspection work, such as inspection exemption, sampling inspection or full inspection. You don't need to worry too much about this general project. The documenter, the material clerk, the warehouse receiver and the finance department will check together, as long as you participate.

Let's talk about structure first, then theory.

Theoretically speaking:

First, conscientiously implement the national and provincial quality policies, procedures, standards and relevant provisions and requirements for strengthening quality management.

Second, responsible for the quality supervision and inspection and acceptance of the project.

Three, take cover engineering must cooperate with the construction unit site representative * * * inspection, acceptance and make records. Carry out quality inspection and acceptance of the division and subdivisional work of each type of work. Deal with the problems found in time and strictly control the project quality.

Fourth, supervise and inspect each team to do self-inspection, mutual inspection and handover inspection, and check the quality inspection records and quality analysis records of the construction team at any time.

Five, timely reflect the construction quality problems, and have the right to stop and rework illegal operations.

Six, assist and guide the construction team to carry out production activities, organize regular on-site quality meetings, study and analyze the causes of quality problems, and formulate pre-control and rectification measures.

From the point of view of practical engineering, the construction quality of each working procedure should be strictly controlled, such as the spacing, binding, joints and quantity of steel bars, the levelness, verticality and smoothness of formwork, and the cross-section size of formwork should be controlled including the upper edge, lower middle part, joints, concrete, walls, doors and windows, and the details of all buildings including the project. These are all bits and pieces that need to be honed and appreciated, and I only said a small part. You can refer to the quality inspector's books to strengthen your knowledge.

Finally, let me talk about the positioning of quality inspectors in the project:

Belong to the main personnel of engineering quality management. In the case of strict requirements on site, the quality inspector is the first person in charge of quality control of the project or construction process, and speaks directly to the technical director. Under the direct leadership of the project manager and technical director.

The salary is generally 30-60% of that of the technical director. But the strength of speaking is very small, which belongs to the quality of the project: the word-of-mouth of the project does not have you, and you are trained as the first role.

In addition, it is often used in the engineering industry. In the industry, the seals of quality inspectors are much more than those of technical directors and project managers.

Personal feeling: The quality inspector is one of the front-line personnel in engineering construction, and belongs to the position of accumulating work experience to lay the foundation for the future technical director and project manager.