These four steps are indispensable in the installation process of wall-mounted air conditioner.

Everyone is familiar with air conditioning. Presumably, every household will have air conditioning, and life is increasingly inseparable from air conditioning. Then do you know how to install a wall-mounted air conditioner? Let me tell you about the installation process of wall-mounted air conditioners. I hope I can help you.

Wall-mounted air conditioner 1 installation process. Determine the installation position of the air conditioner.

The confidential room of air conditioner has a certain distance from the top of the room and the walls on both sides, which is generally greater than 15cm to prevent air circulation from being blocked. When choosing the location of the indoor unit, we should consider choosing the place where the drainage is easy and the outdoor unit pipeline can be connected; Choose a place where there are no valuables such as TV sets and computers, and the air outlet does not blow directly to the bed.

Installation process of wall-mounted air conditioner II. Determine the installation position of the external air conditioner.

Maximize the cooling and heating effect of the air conditioner; Minimize adverse effects, such as noise, vibration, condensed water, cold and hot air, etc. Safe, firm and easy to maintain; Outdoor as close as possible to the indoor unit; Good ventilation, there should be a certain space around the outside machine; Precautions Avoid direct sunlight,

If necessary, equipped with a sun visor, but can not interfere with air circulation; Avoid places with heavy oil smoke, heavy wind and sand, poor heat dissipation or high temperature heat sources; Avoid places where flammable gases are easy to leak and have strong corrosive gases; Avoid places with high salt content, such as seaside, hot springs and places where sulfide gas exists; Meet different brands and avoid other places with air quality problems. When selecting the location of the outdoor unit of air conditioner, we should comprehensively consider various factors and choose the best installation location. You can refer to the selection principles and precautions in the above table.

Installation process of wall-mounted air conditioner 3. Treatment of air conditioning holes in installation area

It is best for professionals to drill holes and pay attention to safety. The hole position of the interior wall should be flush with or slightly lower than the outlet position of the air conditioning drain pipe. The wall hole should be high inside and low outside, and the slope of the wall hole should be 5~ 10 degree, so as to discharge condensed water and prevent rainwater from flowing back into the house along the wall. Before drilling the air conditioning hole,

It is necessary to determine the direction of the room circuit to avoid electric shock accidents. Installation process of wall-mounted air conditioner 4. Location selection of air conditioning sockets and requirements of power supply environment.

The air conditioning socket should be as close as possible to the air conditioning hole wall. This is mainly for aesthetics. Otherwise, if the distance between air conditioner, air conditioner hole and air conditioner power socket is large, there must be two obvious air conditioning pipes and power cords, which will affect the appearance. At the same time, it is best to configure the switch in the air conditioning socket, which is safe and saves electricity.

After reading the information about wall-mounted air conditioners, do you know more about them? To learn more about wall-mounted air conditioners, please continue to pay attention to the home network 1.