What are the names of everything in the Naza-M Lite flight control? To be more specific, let's talk about their functions.

The flight control list of DJINAZA-M Lite includes: main controller (MC), power management module (PMU), GPS and bracket, LED indicator, 3P steering gear line *8 and 3M tape.

Master controller (mc)? The main control system, the flight control center, has a central processing unit (cpu), which is responsible for processing all the data of the aircraft.

The power management module (PMU) is used to provide stable and undisturbed power for the flight control system, in which one end without plug is connected to the switchboard of the frame, and the other end with plug is connected to the x2 port of the main control.

3P steering gear line *8 is used to connect the receiver and main controller of the remote controller. Take five 3P steering gear lines from the receiver 1-5 and connect them to ports A, E, T, R and U of the main controller. Remember one-to-one correspondence.

LED indicator? It is used to debug parameters for the aircraft and display the flight state of the aircraft. The connection port is connected to the LED interface of the main controller.

GPS？ It is used to determine the position of the aircraft and help the aircraft achieve the function of fixed-point return. GPS connector is connected to EXP. Interface of the main controller.

I don't know what can't be uploaded, that's the round white one.

Support fixed global positioning system. Firstly, the GPS carbon rod bracket was assembled with 502 glue. Then install the GPS base on the screw hole of the M4 arm of the center plate on the airplane (hint: the GPS base can be installed when installing the center plate), and then fix the GPS on the top plate of the bracket with 3M tape (note that the bracket is placed at least 250px away from the propeller. Point the arrow marked on the GPS cover at the front of the airplane nose and fix it.

The data line is used to connect the flight control and the computer for debugging.