How does the computer clean up the dust?

Dust is the biggest culprit that affects the life of hardware! Generally speaking, the computer host needs to clean the dust regularly. If the computer is cleaned in time, excessive dust accumulation will lead to symptoms such as excessive hardware temperature, crash and blue screen, and will also affect the life of internal hardware. So how does the computer host clean up the dust? Let's share the dust removal teaching of desktop computer host in the installed home.

Dust removal teaching of desktop computer mainframe

Usually when we clean up the hardware dust inside the computer, the most important thing is the fans of various hardware. There is a lot of dust here, which affects the heat dissipation of hardware most, and it is also difficult to clean up, including CPU cooling fan, power fan, discrete graphics fan, chassis fan, and some chassis have dust screens.

Required ash cleaning tools:

1, brush

2. Cross up

3, high-power blower or blower

Computer ash removal tutorial steps:

1 First, we need to remove the chassis side panel. Most of the screws on the side plate of the chassis are two screws on the back of the main machine, and of course there are four screws on the side plate of the chassis. Let's get rid of it according to our own situation.

2. After removing the two screws, we can remove the side plate of the chassis, as shown in the figure below.

3. If a friend who has some experience in computer assembly can remove all the hardware and clean it, it will be cleaner. Let's look at the dust inside the computer host first. All the hardware, including the chassis, is covered with dust, as shown in the figure below.

4. Blow the inside of the cabinet with a high-power blower or blower first, which is simple and rude.

This is the CPU radiator, and the dust is stuck in it. I can't seem to clean it directly with a brush. Suggest disassembling it.

6. The picture shows the original Intel CPU radiator. We can turn the knobs of the four corner fasteners 90 degrees counterclockwise, and then lift the fasteners upward. (Of course, some users have different CPU radiators and different disassembly methods. Some turnbuckles can be removed with a cross, and some clips on both sides can be removed by pressing downward and outward. )

7. In fact, the Intel radiator fan and heat sink can be removed without tools, and a clip around it can be removed by pulling it out.

8. We clean the radiator fan with a brush, as shown in the figure below.

9, the heat sink can be directly washed with water, very clean, and finally put the CPU radiator back.

10, or take off the discrete graphics card. The method is also very simple. Remove the screws that secure the video card. If there is power on the video card, please unplug it, as shown below.