How to shoot water droplets with a mobile phone

1. Select a basin containing water. Fill the washbasin with water and put it on the stool. Pick up a plastic bottle, open it at the bottom of the bottle and let the water drip slowly. Electrical tape can be used to control the speed and direction of water flow.

2. Support the camera on a tripod, and the height of the camera should be slightly higher than the basin. Too high a camera position will form a top view angle, which is not easy to show the shape of water droplets. It is best to use an off-board flash.

3, pay attention to control the speed of water droplets. Different dripping speeds will produce different dripping effects.

4. Pay attention to the height of water droplets. The water droplets are too small, the splashing height of the water droplets is low, and the effect is not good; The gap is too big, the water splashes, and the camera is easy to get wet. Observe the splash effect of water droplets before shooting until the debugging is satisfactory.

5. M-file shooting requires the shutter to be fast enough. Curing of falling water droplets by exposure time.

6. Use manual focusing. Because the water drops fall fast, autofocus can't capture them. You can put your hand in the position of water droplets to focus automatically. After locking the focus, you can focus manually.

7. Choose the best film by continuous shooting method.

8. Macro lens for lens.