How to draw the reinforcement diagram of secondary beam?

Question 1: Let's talk about how to draw the beam reinforcement diagram by the flat method.

Take a similar picture according to the previous picture.

Question 2: How to draw the material diagram and reinforcement diagram of the main girder? The material diagram and reinforcement diagram must depend on the moment envelope diagram.

The vertical distance from a to b is a part of the ordinate of the bending moment diagram, which is equivalent to the bending moment that a steel bar in this beam can bear.

Question 3: I want to draw the reinforcement diagram of the beam of CAD20 10, but I don't know how to draw the reinforcement of the section. Do I look better? /kloc-draw six gardens at 0/5 and then use the fill command. There are some commands in cad commands.

Problem pkpm how to generate beam reinforcement diagram, choose wall beam-column construction drawing-beam-flat construction drawing.

Click Settings-Text Settings below to set the height and width of the text.

Set rebar parameters, and then draw a new drawing.

However, this normal is only used as a template diagram of reinforcement, which needs to be optimized and modified by itself.

Question 5: After all the model data are input, how to draw the reinforcement diagram of the beam with PKPM? Build the PMCAD model, exit the assembly and enter the second step. SATWE receives PM to generate satwe data. Then enter the parameter calculation. There is a column of beam-slab construction drawing in the calculated "wall beam-column construction drawing", which automatically generates beam drawings.

Exit PMCAD and enter the second step.

Among them, items 1 and item 8 must be implemented.

Question 6: How to reinforce the beam of two-way slab and how to draw the reinforcement diagram of the beam? According to the mechanical characteristics of two-way slab beams, slabs that bend only in one direction or mainly in one direction are one-way slabs; A solid two-way slab that bends in two directions and cannot be ignored. (L 1: calculated span in short span direction, L2: calculated span in long span direction; L2/L 1 >=3, calculated by one-way slab, L2/L 1 Question 7: What should be used to draw the reinforcement diagram? Operating steps:

1, open AutoCAD software.

2. Draw the basic graphics of main girder with broken lines in CAD.

3. After defining the block, create a linear parameter and apply the stretching action.

4. Define the main girder specifications and main girder length attributes to make dynamic blocks.

5, when necessary, insert the block into the drawing space to draw the main girder reinforcement very conveniently.

6, steel specifications and spacing can be modified at any time.

7. It is enough to automatically generate the rebar length label.

Question 8: How many reinforcement plans should I draw for this beam? You don't need to draw it, and you don't need to draw cross-section reinforcement for leveling unless there are special structural requirements.

Question 9: How to draw the beam construction drawing in pkpm There is a beam-column construction drawing in the submenu of PKPM, which can be drawn by drawing, drawing flat, or drawing a picture frame in the past. PK is a program used for plane calculation of frame bent, which is generally used for plane bent calculation of workshops and warehouses. For frame calculation, it is suggested to use space programs such as SATWE and TAT for calculation. If a bent is extracted by PK program and calculated separately, the error is large and it can be used for checking.

The frame includes beams and columns.

Question 10: Is the flat construction drawing of the beam the same as the reinforcement drawing of the beam? The plane construction drawing of column shows the size of column on frame column or beam and the reinforcement of beam. The plane construction drawing of the beam shows the size and reinforcement of the beam.