How to make a broom? How to make a broom by hand?

1. To make a broom, you need 0.5kg of millet and 700g of wire. 2. Take a 4-meter-long, 3 ~ 5-mm-thick oil wire rope, one end of which is tied to the footstool or door frame in the house, and the other end is tied to the middle of the walking pole. 3. One end behind the walking stick is tied with a rubber belt with a width of 7- 10 cm and a length of 80-90 cm, and the other end is connected with one end of the walking stick with a detachable hook. 4. When tying the broom, tie the walking belt around your waist, take 3-4 core brooms, take 4 leather brooms, clamp one as straw, tie it tightly with oil steel wire, press it into line 22-25 to tie the first thread, and wind each thread twice. 5. Take 4-core millet, 2-skin millet, 1 straw in the second pass, and continue after the first pass. Lofa method is the same as the first pass. 6. The third and fourth roads are the same as above. For the fifth and final time, take 4 shelled millet, 1 stalk, add 4 shelled millet on each side, then pull it twice, and then pull it up every 3 ~ 5cm. 7.*** Le 15 ~ 17 Road. The bound broom will scrape off the shell with a scraper. In order to make it bright, white and not moldy, it needs to be fumigated and disinfected with sulfur. 8. The method is to dig a pit with a depth of half a meter underground, put a piece of sulfur in a bowl or an iron box, use wooden sticks and other barriers on the pit, put more than 100 brooms on it, cover it with plastic sheets, ignite the sulfur, and fumigate it for about 1 hour.