What if the restaurant floor is too slippery and oily?

What if the restaurant floor is too slippery and oily?

What if the restaurant floor is too slippery and oily? Because the dining room floor is in an environment with oil fumes for a long time, the floor is easy to form oil stains. Generally speaking, oily floors are easy to slip, which is very dangerous. What if the restaurant floor is too slippery and oily?

There is oil on the floor of the dining room, which is too slippery. what can I do? 1 The first step is to test the ground state.

Facing any construction site, it is necessary to determine a test area. Clean up the ground first, dip it in clean water with a flat mop and apply it directly on the ground to see if there will be water on the ground.

If there is accumulated water, carry out the second step of wax removal;

Step 2, remove wax or clean the floor.

Step three, apply protective agent.

The dosage standard of anti-skid agent is as follows:

(1) The water absorption of the anti-slip coating tool in dry state is 300ml.

(Put the dry special coating tool for protective agent into 1 kg antiskid agent, take it out and squeeze it for three times. )

(2) Anti-skid agent kg, according to the above standards, can be dipped for 7 times, each time according to the conventional amount of 16 tile;

(The size of each tile is 0.6 * 0.6 = 0.36m2)

③ 1 kg antiskid agent can be applied to 1 12 ceramic tile, with a converted area of 40.32㎡, and one barrel 10 kg antiskid agent can handle 403.2 ㎡;

Note: If there is still water after the anti-skid agent is coated in this step, then add a little detergent to the anti-skid agent;

Step 4: Wait for the effect.

After the painted ground is completely painted, let it stand for more than 10 minute;

Step 5, clean the surface and test the effect.

Because the anti-skid agent is semi-oily, it is necessary to thoroughly brush the surface with a flat mop or brush while cleaning with clean water, so that the anti-skid effect will be perfectly presented, otherwise the anti-skid effect cannot be tested without cleaning the surface anti-skid agent.

The floor of the dining room is too slippery and oily. what can I do? 2 coup 1: cleaning.

If the floor of the dining area is slippery, it is probably because there are stains on the floor. You can soak the mop in hot water, and then add a proper amount of detergent and alcohol, so that stains can be easily removed. After cleaning, the ground can be dry, and the dry ground is less likely to slip.

Coup 2: Carpet laying

You can lay a carpet on the surface of the wooden floor at home, and you can also lay some in areas and corridors where water is used more, which can effectively play a non-slip role. It is recommended to choose a dark carpet, which is more resistant to dirt.

Coup 3: anti-slip agent

The working principle of the anti-skid agent is that the anti-skid agent for ceramic tiles can effectively penetrate into the pores of floor tiles and stones, dissolve a small amount of silicon, thicken the original pores, and form many tiny invisible nano-scale dents on the surface. When the ground meets water, the capillary will be filled with water. When the sole or sole passes through the mantle, the water will be squeezed out of the capillary under pressure, so that the capillary will be in a vacuum state, thus contacting the sole, which can form the function of a physical sucker. The ground friction coefficient is greatly improved. It reduces the risk of floor tiles falling down after encountering water and has the effect of "convergence when encountering water". Even if the surface part is worn later, the existing structural changes inside are stable, so the long-term anti-skid effect can be maintained. The treated floor tile or ground stone also has obvious effect when it is dry, and the anti-skid effect is improved several times when it meets water or greasy state, and it is effective for a long time after anti-skid treatment.

What if the restaurant floor is too slippery and oily? What should I use to mop the floor clean and not slippery?

It depends on what floor you mop. If the floor is dirty, use washing powder. If it's not very dirty, you can mix some laundry detergent or detergent with water, spread it on the floor, and then mop the floor.

But no matter what you use to mop the floor, I think you should sweep the floor first and clean up the garbage broom on the floor first, which will be easier and more labor-saving. When the ground is dirty, you can sprinkle some water on the ground first, then sprinkle washing powder later, brush it with a special brush first, then rinse it with water, then clean up the sewage, and finally mop it with a clean mop.

If there are still stains, you can use a little detergent or something, and finally rinse the mop clean. Dad, mopping the floor should be very clean.

If the room you often live in is generally not very dirty, it should be easier to drag it up. If it's not too dirty, it's usually dragged for two or three times and then it's clean. It's a little dirty. Just add some detergent and drag it for two times.

What should I do if the wooden floor is always dusty and can't be cleaned?

First, clean up the dust on the ground. If there are many stains on the ground, we can choose to decontaminate him with water, baking soda and alcohol at the first time.

The second time, you can choose to add the softener for washing clothes and mix it with toilet water. The function of rice washing water is to maintain the floor surface, and the function of softener is to prevent the floor from generating static electricity. Toilet water can add fragrance to the room, and it also contains alcohol, which can make the water on the ground evaporate faster. Cleaning the floor in this way can make the room smell fresh, there is no redundant watermark on the floor, there is no static electricity on the floor surface, and a protective layer is added to the floor surface.

What should I pay attention to when mopping the floor?

1, cleaning the mop, you can soak it with disinfectant, otherwise the bacteria growing on the mop can be easily brought to the floor.

2. mop the floor before walking to avoid the danger caused by water stains on the floor, especially for the elderly and pregnant women.

As for the choice of mop, as long as it is easy to clean and dry, you can avoid using the mop directly without cleaning next time, which will make the floor dirtier.

4. You can use a vacuum cleaner or a sweeping robot to clean the dirty box in time to avoid reuse without cleaning.