Let's talk about the steps of removing old windows and installing new windows.

Windows are an important part of the family. When the old window is damaged, it must be replaced in time to prevent others from falling. So, what are the steps to remove the old window and install the new window? Let's see:

Removing window frame

Prepare tools such as screwdriver first, and then use these tools to remove the window sash. Pay attention to safety when disassembling. Someone should hold the window on the other side to prevent it from falling. Moreover, the sash should be gently placed on the ground after disassembly, and it should not be pushed down from the sky, otherwise it will hurt the pedestrians underground.

Removing window frame

After the window frame is removed, the whole window frame can be removed. When disassembling, first cut the sealant in the window frame with a blade. If it is fixed with bolts, just remove the bolts directly with a screwdriver. If the bolt on it is rusty, you can break it with an impact drill, so that the window frame can be easily removed.

Repair the window

When removing the window, the window opening may be damaged. If it is not repaired, it will affect the installation of new windows in the later period. Therefore, after the window is removed, it must be repaired to see if the window is uneven. If there is such a situation, we must deal with it in time.

Factory door-to-door measurement

After all the old windows are removed, you can contact the manufacturer to measure the size, and they will have a special installation master to check the situation, and will design the drawings according to the installation situation and make a quotation. After measuring the size, the manufacturer needs to customize the appropriate window, which usually takes 20-30 days to make, and can be reinstalled after making.

Reinstall the window.

Finally, you can start installing windows. Install the window frame first, and fix it on the repaired window. Pay attention to the firm installation and seal around the window frame. Then install the window sash. After installation, try to open and close the window to see if it can be closed tightly.