How to make beautiful seams?

Joint filler is a product that can solve the problem of blackening brick joints and beautify the home environment. However, with the improvement of building materials industry, there are more and more kinds of sewing agents on the market, and the decoration effect of different kinds of sewing agents is very different. Next, I'll give you a detailed introduction to what is a beauty agent and the types of beauty agents for your reference.

What is the beautiful seam interpreted by the decoration network?

Beautiful sewing agent is a beautiful sewing agent, which is an upgraded product of jointing agent. It is used to beautify the gap between the wall and the floor tile. In addition to being beautiful, it is not easy to blacken and dirty the cracks in the tiles and will not breed bacteria. However, the caulking agent is only suitable for the decoration of tiles, mosaics, stones, wood, glass, aluminum-plastic plates and other cracks.

Why do you want to use beautiful sewing agent in decoration?

It not only solves a series of problems caused by the blackening of brick joints, but also greatly improves the decoration grade. The sewing agent has many colors, is non-absorbent, anti-greasy, easy to clean, non-discoloring, wear-resistant and high in strength. Completely change the sewing black mold phenomenon. Joint sealant is also a kind of green decorative material, which is not only advanced, but also non-toxic and tasteless, and does not contain benzene, toluene and xylene. And the construction is convenient, and the operation is simple and easy to learn.

Types of sewing agents

At present, the mainstream sewing agents on the market are mainly divided into one-component sewing agents and two-component sewing agents. One-component sewing agent is made of polymer nano and pigment, which is an earlier sewing product. Its advantages are simple, fast and convenient construction, but its hardness and color are slightly lower than that of two-component sewing thread, which is composed of epoxy resin, curing agent and pigment. Its advantages are high hardness, good gloss and long service life.

White cement-based caulking agent: this is the most commonly used, traditional and cheapest, but it is also the most obvious disadvantage. Generally, the gap will turn black in two or three months, which is extremely unsightly.

One-component sewing agent: generally packed with glass glue, with simple construction technology and rich colors. One-component is usually an aqueous material because it shrinks and collapses when solidified by volatile water. It is very economical to choose the sealant as the base according to the size of the gap and make the surface beautiful during construction. Full filling needs many times of construction, and the price is higher and the effect is better. A group of sewing agents are in a tough colloidal state after curing, so it is recommended to use them in a place where they will not wear.

Two-component oily joint agent: some customers also call it ceramic glue, which evolved from plastic steel mud. Its advantages are no collapse, hard surface and rich colors. The disadvantage is that the operation is complicated, and it is necessary to mix and stir the two components in proportion and put them into plastic pipes. During construction, both sides of tiles should be pasted with masking paper, which is easy to pollute tiles and stick hands, and clothes are difficult to clean. Fragile, easily broken and cracked. You can't use floor heating to caulk antique tiles.

Two-component waterborne sewing thread: also called two-component epoxy sewing thread. So far, the operation is very simple and the performance is good. After curing, it is as hard as ceramics, and has certain flexibility and is not easy to crack. Bright luster, dazzling. Fundamentally solves the problem that the existing joint filler for ceramic tiles is black and moldy, and is environment-friendly, nontoxic and tasteless.

Self-leveling joint agent: pure liquid and two-component oily, the construction is very simple, but generally only the floor can be made, not the wall, and the cracks in the tiles must be primed in advance, which requires many operating procedures. Suitable for colors with sequins. There are also defects such as easy pollution, difficult cleaning, brittleness after curing and easy cracking of ceramic tiles.

Multi-component sewing agent: mainly the products of some foreign manufacturers, with rich colors, high hardness and not easy to blacken. The disadvantage is that the surface is rough, it will still be black after a long time, the operation is complicated and the price is expensive. You can only make wide seams of more than 3mm, but you can't make thin seams or walls, which will sag.

Other adhesives that can fill gaps.

Jointing agent: Jointing agent is a composition with white cement as the main raw material and appropriate inorganic pigments and additives. Used for joint filling of brick materials such as marble. However, once the jointing agent is used for a long time, it will appear black and moldy after the precipitation of some air media such as dust, which greatly reduces the decorative effect and aesthetic degree.

White cement: It was relatively mainstream in the 1990s, and now it is rarely used for new house decoration. It is characterized by low price and can be operated by general decoration masters. But after a long time, it will fall off and leak, and at the same time, the waterproof performance is very poor, and the wet place will be moldy and black, which will affect the appearance.

Joint sealant is an upgraded product of joint sealant, which is used to beautify the gap between wall and floor tile. There are many kinds of it, such as one-group joint agent, two-group joint agent, white cement joint agent and two-component oily joint agent. They have different types, different compositions, different scope of application and different decorative effects. Everyone must choose according to their own needs, hoping to help you.