What is the reason for slipping?

First, the definition of Liu: Liu dialect. It means that the ground can't stand and walk unsteadily, and it also means that the friction becomes smaller.

Second, the phenomenon of slipping.

In belt drive, there is elastic sliding. When the working load is further increased, the elastic slip zone (i.e. elastic arc) will expand to the whole contact arc, and slip will occur at this time.

In belt drive, slip should be avoided as much as possible.

Negative effects of skidding: it will aggravate belt wear, reduce the speed of driven wheels and even lead to work failure.

The advantages of skidding are: overload protection, that is, when the high-speed end is abnormal (such as abnormal growth), the low-speed end can be stopped to protect the corresponding transmission components and equipment.

Third, how to deal with slippage.

Turn the throttle slightly back to the normal direction, and constantly adjust between turning and returning, so as not to exceed the normal driving position of the wheels. Don't slam on the brakes when there is sideslip or tail flick, which will have no effect on deceleration, but will make the vehicle out of control and cause an accident.