Common Jerry-cutting behaviors in hydropower transformation ensure foolproof.

Hydropower transformation is an important link in family decoration, which deeply affects and influences the quality of family decoration. In the process of hydropower transformation, some decoration workers will inevitably cut corners. Next, Bian Xiao will introduce in detail the common Jerry-building behaviors in hydropower decoration to ensure that the decoration is foolproof!

First, the common behavior of cutting corners in hydropower transformation-water pipe laying "saving fittings"

In the conventional waterway construction, it is necessary to use various small pipe fittings, such as bridge bends, direct connections, tees, etc. , complete the standard pipeline laying. But in the hands of a bad construction team, it is easy to turn the waterway pipeline without an interface. Bridge elbows are not used when crossing wires and pipelines. It is easy to do this, but it has great influence on pipeline quality and later construction.

Second, the common behavior of cutting corners in hydropower transformation-water pipes and fittings are not matched

"Reducing materials" means not only using less materials, but also using inferior materials instead of high-quality materials to earn the difference. In waterway reconstruction, pipeline replacement is less, because owners will pay more attention to it. However, due to the small size of accessories and the large number of accessories used, it is easy for owners to connect water pipes with inferior accessories if they are not careful and encounter bad decoration companies or construction workers. You know, this approach can easily lead to problems in the later interface.

Third, the common behavior of cutting corners in hydropower transformation-cold water pipe mixed with hot water pipe

Affected by thermal expansion and contraction, hot water pipes require higher performance of materials such as high temperature resistance than cold water pipes, and are generally more expensive than cold water pipes. Generally, blue is a cold water pipe and red is a hot water pipe. During construction, hot water pipes can be used completely, and hot and cold water pipes can also be used normally. However, some bad construction teams may use cold water pipes as hot water pipes, which is no problem for the time being, but it is easy to break and leak the cold water pipes later.

Four, the common behavior of cutting corners in hydropower transformation-construction waste is poured into the sewer.

When decorating, construction workers sometimes pour waste water and a lot of cement, sand and sundries into the sewer in order to save trouble. This is likely to form a sewer blockage and make the water flow difficult. Therefore, after the completion of waterway construction, all water pans, basins and bathtubs should be filled with water, and then see if the water is unobstructed.

The above is the relevant content of common Jerry-building behaviors in hydropower transformation, hoping to help everyone!