Joke Collection Website - Mood Talk - How to make mosquito-repellent incense stand up without support?

How to make mosquito-repellent incense stand up without support?

When summer comes, people light mosquito-repellent incense one after another. However, some people often encounter it in their lives. When preparing mosquito-repellent incense, they found that there was no support. What shall we do? Actually, just make one ourselves! However, how to make mosquito-repellent incense racks? Let's study together.

What if mosquito-repellent incense has no bracket?

1, self-made mosquito-repellent incense rack with iron plate, etc.

Iron plates and iron filings can be used as supports for mosquito-repellent incense.

Practice: prepare an abandoned iron plate or iron sheet, then fix it in the middle of the iron plate with iron filings, and then divide the iron filings into several equal parts, so as to better put mosquito-repellent incense.

2. Self-made mosquito-repellent incense holder with milk powder cover

Prepare an abandoned milk powder can cover, and then drill several holes in it with nails. It is best to choose the uneven side for mosquito-repellent incense.

3. Use hairpins as mosquito-repellent incense holders.

Ordinary black hair clips for girls can also be used as mosquito-repellent incense holders.

Practice: First open the hairpin at 90 degrees, then stick one section on the ground with transparent glue, and the end of the other end is slightly tilted on the net, and a simple mosquito-repellent incense bracket is ready.

4. Use cans as mosquito-repellent incense holders.

If the mosquito-repellent incense is not in a complete shape, but is broken into several sections, then the broken mosquito-repellent incense can be better placed on the mosquito-repellent incense rack made of cans.

Practice: Prepare a jar, then poke several holes in the jar, the size of the holes can be enough to put one end of mosquito-repellent incense in, and then insert one end of mosquito-repellent incense into the hole of the jar to use.

5. Use nail clippers as mosquito-repellent incense holders.

The support of mosquito-repellent incense can also be made of polishing strips of nail clippers.

Methods: First, put the nail clipper on the side, break the polishing strip of the nail clipper at an angle of 90 degrees with the ground, and finally insert the hole in the middle of the mosquito-repellent incense into the tip of the polishing strip.

6. Use paper clips as mosquito-repellent incense holders.

Simple mosquito-repellent incense holders can also be made of paper clips, small wooden blocks and long screws.

Practice: open a hole in the middle of the wood block, and at the same time, a section of the hole should be recessed to the depth of a nut. So that it can be placed smoothly, and then the screw passes through the wood block. Straighten the paper clip and wind it around the top of the screw several times, leaving a length of 1.5cm for inserting mosquito-repellent incense.

Do it.

7. Fold the cardboard into a fan-shaped self-made mosquito-repellent incense rack.

The support of mosquito-repellent incense can also be made of relatively hard paper.

Method: Prepare a piece of hard paper, preferably a cover paper, then fold it into a part of the width of the paper at one end like an origami fan, and then fold it into the same width. Finally, put the just folded paper on the ground with the wavy edge facing up.

Then put the mosquito-repellent incense on the paper.

When summer comes, people light mosquito-repellent incense one after another. However, some people often encounter it in their lives. When preparing mosquito-repellent incense, they found that there was no support. What shall we do? Actually, just make one ourselves! However, how to make mosquito-repellent incense racks? Let's study together.

What if mosquito-repellent incense has no bracket?

1, self-made mosquito-repellent incense rack with iron plate, etc.

Iron plates and iron filings can be used as supports for mosquito-repellent incense.

Practice: prepare an abandoned iron plate or iron sheet, then fix it in the middle of the iron plate with iron filings, and then divide the iron filings into several equal parts, so as to better put mosquito-repellent incense.

2. Self-made mosquito-repellent incense holder with milk powder cover

Prepare an abandoned milk powder can cover, and then drill several holes in it with nails. It is best to choose the uneven side for mosquito-repellent incense.

3. Use hairpins as mosquito-repellent incense holders.

Ordinary black hair clips for girls can also be used as mosquito-repellent incense holders.

Practice: First open the hairpin at 90 degrees, then stick one section on the ground with transparent glue, and the end of the other end is slightly tilted on the net, and a simple mosquito-repellent incense bracket is ready.

4. Use cans as mosquito-repellent incense holders.

If the mosquito-repellent incense is not in a complete shape, but is broken into several sections, then the broken mosquito-repellent incense can be better placed on the mosquito-repellent incense rack made of cans.

Practice: Prepare a jar, then poke several holes in the jar, the size of the holes can be enough to put one end of mosquito-repellent incense in, and then insert one end of mosquito-repellent incense into the hole of the jar to use.

5. Use nail clippers as mosquito-repellent incense holders.

The support of mosquito-repellent incense can also be made of polishing strips of nail clippers.

Methods: First, put the nail clipper on the side, break the polishing strip of the nail clipper at an angle of 90 degrees with the ground, and finally insert the hole in the middle of the mosquito-repellent incense into the tip of the polishing strip.

6. Use paper clips as mosquito-repellent incense holders.

Simple mosquito-repellent incense holders can also be made of paper clips, small wooden blocks and long screws.

Practice: open a hole in the middle of the wood block, and at the same time, a section of the hole should be recessed to the depth of a nut. So that it can be placed smoothly, and then the screw passes through the wood block. Straighten the paper clip and wind it around the top of the screw several times, leaving a length of 1.5cm for inserting mosquito-repellent incense.

Do it.

7. Fold the cardboard into a fan-shaped self-made mosquito-repellent incense rack.

The support of mosquito-repellent incense can also be made of relatively hard paper.

Method: Prepare a piece of hard paper, preferably a cover paper, then fold it into a part of the width of the paper at one end like an origami fan, and then fold it into the same width. Finally, put the just folded paper on the ground with the wavy edge facing up.

Then put the mosquito-repellent incense on the paper.