Introduction of tile adhesive introduction of tile adhesive

The main characteristics of ceramic tile adhesive are high bonding strength, water resistance, freeze-thaw resistance, aging resistance and convenient construction. It is an ideal bonding material. So today Bian Xiao will introduce the tile glue, hoping to help you.

Introduction of tile adhesive

Porcelain tile binder, also known as tile binder or adhesive, viscose mud and other names, is a new material for modern decoration, replacing the traditional cement sand. Adhesion is several times that of cement mortar, which can effectively paste large tiles and stones and avoid the risk of brick falling. Good elasticity to prevent hollowing in production. This product is a polymer modified cement-based tile adhesive, which can be divided into 1 (common type), 2 (enhanced type) and 3 (larger size tile or marble).

Secondly, the application method of tile adhesive is introduced.

On the construction technology of ceramic tile adhesive: the traditional point sticking method can be used to lay ceramic tiles with ceramic tile adhesive, that is, the mixed glue is coated on the back of the ceramic tile and then stuck on the substrate. However, this sticking method is easy to cause empty drum, so the scraper method is strongly recommended, and the specific methods are as follows:

1. Use a toothed scraper to coat the mucilage on the working face to make it evenly distributed and form strip teeth. Each floor is about 1 m2 (depending on the weather and temperature), and then the tiles are kneaded and pressed on the floor during drying.

2. When choosing the size of the tooth scraper, we should consider the smoothness of the working face and the concavity and convexity of the back of the ceramic tile;

3. If the gap on the back of the tile is deep or the stone and tile are large and heavy, it should be glued on both sides, that is, mucilage should be coated on the working surface and the back of the tile at the same time.

Tile adhesive brand

1, Godava tile adhesive? : One of the leaders in the domestic special dry-mixed mortar industry, one of the top ten brands of tile glue, and the most important building mortar enterprise in the world.

2. Ma Bei Mapei tile glue? : Italian brand, leader in the field of adhesives for floor and wall installation and supporting production, and top ten brands of ceramic tile adhesives.

3. cereset tile adhesive? German brand, one of the most international multinational groups in the global market, top ten brands of tile glue and top ten brands of waterproof coating.

4.Bostik tile adhesive? France Total Group, one of the largest manufacturers of adhesives and sealants in the world, one of the top ten brands of ceramic tile adhesives and a world-renowned brand.

5. BASF BASF tile adhesive? ; Originated from Germany, the world's leading supplier of automotive coatings and general industrial coatings, one of the top ten brands of tile glue, is known as the most respected chemical company in the world.

6. Is Australian high tile glue ok? Australian brand, a large multinational group specializing in manufacturing dry powder mortar and polymer additives, is an influential brand and one of the top ten brands of tile glue.

7. Yuchuan tile glue: Asia's largest manufacturer of dry mortar with several national patents, the most influential brand of ordinary mortar and the top ten brands of tile glue.

8. Deng's tile adhesive:? China is a well-known trademark, one of the largest dry-mixed mortar manufacturers in China, and one of the top ten brands of tile glue.

9. Yuhong ceramic tile adhesive: a national high-tech enterprise, a well-known trademark in China, a famous brand product in Beijing, one of the top ten ceramic tile adhesive brands and a famous trademark in Beijing.

10, residential tile glue? : The largest/most complete manufacturer of dry-mixed mortar for buildings in the central and western regions, the top ten brands of tile glue, and the new green building materials enterprise.

How to remove tile glue

1, hair dryer, placed in the corner of the tile. ? Use the heat of the blower, set it high, move it slowly, and heat the whole surface area of the tile. Your goal is to soften the tile adhesive.

2. Go back to the first corner, keep the hair dryer for a few minutes, then gently scrape and pry the corner of the floor. Gently slide the shovel to relax and remove the tiles.

When laying new tiles, you must remove all the old adhesives. ? Use a hair dryer to soften the adhesive and gently scrape off as much adhesive as possible.

4. If there is a lot of adhesive, use a piece of dry ice. Dry ice adhesive. Wait until the dry ice freezes the old glue. Quickly remove lumps with a sticky scraper. Dry ice moves to a new place. Say it again.

5. Finally, the glue removal method involves the use of lemon tile glue. This medicine is the least toxic. ? The soaked tile adhesive will wet the cloth for more than an hour. Then gently rub the reagent on the adhesive.

6. Remove the adhesive as much as possible with a scraper.

7. After removing the old glue, the subfloor in this area was successfully completed. New glue and tiles need smooth and clean rough floors.

How to successfully eliminate the tile glue on the wall without damaging the wall?

1, apply a small amount of water gel. ? If it is organic glue, the water will start to soften and let you scrape it off. If you use tough adhesive, water will not be effective, and the test is only a small area to avoid a potential waste of your time.

2. Find a way to tile adhesive or citric acid or soybean alkali; These products have low volatile organic compounds (VOCs) and need ventilation more than chemical products. When using this disinfectant, wear gloves and take preventive measures, such as placing plastic film in the work area.

3. Stick glue on the softened wall. ? Check the glue frequently; Some adhesives need to be redissolved than others. ? Do not leave this product for too long, because it may go out again. ? When the glue becomes soft, it can easily pass through the putty knife, and it is ready.

4. Scrape the soft glue off the wall with a putty knife. If the spots are still stubborn, you can apply an extra layer of adhesive, or gently break the hard spots with a hammer and chisel.

Three, the use of tile glue matters needing attention

1, the best mixing effect is using electric mixer;

2. The proportion of gouache can be appropriately adjusted due to different substrates, weather and construction conditions;

3. In rainy day construction, protective measures must be taken to keep out, and the construction area must be guaranteed not to get wet by rain within 24 hours after bricklaying;

4, mucilage should be controlled according to the weather within 2-3 hours after use;

5. Do not mix dry mucilage with water before use;

6. After bricklaying is completed, the next joint filling process can only be carried out after the mortar is completely dried (about 24 hours);

7, ceramic tile adhesive coating should be uniform and full paste, adhesive layer thickness should be about half of the tooth spacing of the scraper used.

Matters needing attention in the use of tile glue, what should be paid attention to in the process of joint filling? Strict control of joint filling process can avoid tile cracking. If you don't know where to start, don't be afraid. Apply for Tuba rabbit decoration insurance online, so that professional quality inspectors can strictly control every process in our decoration process!

The above is the introduction of tile glue made by Bian Xiao for everyone. I hope it will help you. For more introduction of tile glue, please continue to pay attention to the decoration of Tuba rabbit.

Tubatu Online provides you with "every decoration quotation, 1-4 local decoration companies, 3 sets of decoration design schemes" and the decoration pit avoidance strategy for free! Click this link:/Zhu Ye /zxbj-cszy.php? to8to _ from = SEO _ zhidao _ m _ jiare & amp； Wb, you can get it for free ~