Construction technology of artistic coatings

Art paint replaces traditional latex paint, which is not only natural and environmentally friendly, but also superior to latex paint in texture and texture. But the artistic painting process is better than the details. Do you want to make your wall more brilliant? Let's talk about the construction technology of art paint!

Tools/Materials Special batch of knives for artistic paint polishing stainless steel knives, waste newspapers, putty powder, sandpaper polishing tools, putty knives, roller brushes, spraying tools.

Before all processes at the grass-roots level are processed, the original damaged wall surface to be sprayed with art paint wall surface should be thoroughly removed, and impurities such as dyes, oil stains and dust should be removed from the wall surface.

Fill a vacancy: It is very important for high-grade art paint wall foundation. After the first step, paint the wall with concrete interface agent. Then paint putty on the outer wall to fill the wall. Large holes and defective walls are filled with flexible putty, and the first leveling is basically completed. After the putty is dry, polish the part with a polishing tool, and then spread a flexible putty to make the wall generally flat.

Polishing the base: After the putty is thoroughly dried again, polish the base again with a polishing tool, and then apply the flexible putty again until the wall is smooth. Because high-grade art paint belongs to high-grade putty coating, not only the primer needs self-sealing materials, but also the substrate is firm, so polishing for many times is helpful for the next step and the maintenance behind the wall.

Texture characterization: mix the putty primer in proportion and let it stand for a few minutes. After painting putty primer, dry it thoroughly and polish it with 350 sandpaper. Next, you can draw the basic texture. In the first procedure, the patterns on the wall can be scraped off one by one with a art paint spatula. Each pattern should not overlap, and there should be gaps between patterns. In the second process, the corners of the left pattern are patched, and finally, the whole pattern is checked for gaps and filled. If there is a rash, you can scrape, scrape and grind it with a spatula.

Texture coloring: dip a sponge in dye and gently smear it on the wall, then suck it dry with a sponge, and then roll it with a roller brush to paint the texture.

Spraying exterior wall latex paint