How much is pe water pipe? One meter specification and manufacturer introduction

Pe water pipes, also known as polyethylene plastics, are mainly made of a nonpolar thermoplastic resin with high crystallinity, milky white surface and translucent appearance. In addition, PE pipe also has very good performance. PE water pipes not only have good stability, but also have strong impact resistance, good corrosion resistance and are not easy to crack. In addition, PE water pipes also have very good transportation performance and environmental protection performance. Then Bian Xiao will tell you about PE pipes.

How much is pe water pipe one meter?

Because of its unique advantages, PE pipes are widely used in building water supply, building drainage, buried drainage pipelines, building heating, gas transmission pipelines, electrical and telecommunications protection sleeves, industrial pipelines, agricultural pipelines and so on. Mainly used for urban water supply, urban gas supply and farmland irrigation.

Hebei Laiwang, the top ten brand enterprises of PE water supply pipes in China: ￥10/m.

Changhong plastic industry? Zetian water-saving PE pipe manufacturer: ￥ 16.8/ m

Aimin plastic PE water supply pipe has no middleman: ￥12/m.

HDpe water supply pipe PE water supply pipe: ￥30.62/ m

Where is Jing? φ32mm * 16 * 3？ H:2.5 yuan per square meter.

(Price source network, for reference only)

Specification of polyethylene water pipe

DN 15(4 main pipes), DN20(6 main pipes), DN25( 1 inch pipe), DN32( 1 inch 2 pipe), DN40( 1 inch half pipe), DN50(2 inch pipe), dn50.

Pe water pipe manufacturer

1, Hebei laiwang plastic products co., ltd was founded in 1988, which is a pipe manufacturing enterprise with a history of 20 years, integrating design, production and sales. It has fixed assets of 48 million yuan, 368 employees, senior managers 18, 38 senior technicians and 6 engineers.

2. Xiongxian Aimin Plastic Co., Ltd., formerly known as Aimin Plastic Factory, was founded in 1983. The company was established in June, 2000, 10 till now; Is a private limited liability company with a registered capital of 50.06 million yuan, an annual production capacity of 6,800 tons and an output value of 50 million yuan. There are 6 managers, senior engineer 1 person, 6 engineers, 25 technicians and 70 employees.

With the tenet of "scientific management as the guide, technology as the foundation, quality as the center, and customer first", Tianjin Jingtong Pipe Industry Co., Ltd. continuously develops new products, and ranks among the ranks of new building materials industry in China with perfect enterprise management system and abundant production capacity.

What are the characteristics of pe water pipes?

corrosion resistance

Polyethylene is a non-inert material. Except for a small amount of strong oxidant, it can resist the corrosion of various chemicals and is not easy to breed bacteria. As we all know, the reason why steel pipes and cast iron pipes are replaced by plastic pipes is not only because of their lower energy consumption, lower domestic energy consumption, lighter weight, smaller water flow resistance, simpler and faster installation, lower cost, longer service life and thermal insulation function, but also because plastic pipes have better corrosion resistance than steel pipes and cast iron pipes and are not easy to breed microorganisms. The service life of polyethylene pipe is more than 50 years, which is not only confirmed by international standards and some advanced foreign standards, but also proved by practice.

Flexibility (= flexibility)

Polyethylene has unique flexibility and excellent scratch resistance, and the flexibility of polyethylene pipeline system has great technical and economic value. The flexibility of polyethylene is an important property, which greatly improves the value of this material in pipeline engineering. Good flexibility enables polyethylene pipes to be coiled and supplied in a long length, avoiding a large number of joints and fittings. For example, Nantong Water Supply Company, a national urban water improvement demonstration unit, made full use of the coiled characteristics of PE small-diameter pipes when selecting materials in the transformation of one household and one meter. From the water meter to the end of the pipeline, there is no need for a pipe joint in the middle, which not only saves the cost, but also improves the work efficiency.

Low temperature tolerance

Polyethylene has outstanding low temperature resistance, and the low temperature embrittlement point of PE pipe is -70℃, which is superior to other pipes. In winter, PVC-U pipes are prone to brittle fracture in field construction. An experience gained from the pilot project of laying PVC-U buried water supply pipe in Beijing is that it is not suitable to lay PVC-U pipe when the temperature is below zero. There is also an obvious evidence that in order to improve the toughness and low-temperature impact resistance of PP, ethylene and propylene monomers can be polymerized into random polypropylene (PP-R). Generally, the mixed gas polymerization of propylene and ethylene is adopted to obtain a polymer with random distribution of propylene and ethylene segments on the main chain (that is, PP-R pipe). However, the low-temperature resistance of PP-R after improvement is still not satisfactory, and it is brittle.

Fracture toughness

Polyethylene has good fast crack propagation fracture toughness. When the crack spreads rapidly, it can spread rapidly from several hundred meters to more than ten kilometers at the speed of 100 ~ 45m/s, leading to long-distance pipeline damage, large-scale leakage accident and subsequent combustion explosion (natural gas transportation) or flood (water transportation) accident. This kind of accident is unlikely to happen, and once it happens, it will be extremely harmful. For the sustainable development of plastic pressure pipes, the importance of preventing the rapid crack propagation and failure has exceeded the requirements of long-term life strength performance.

To sum up, we can see that pe water pipes are very important in our lives. The water we usually drink is transported through pe water pipes. PE water pipes have good high temperature resistance, strong impact resistance, good corrosion resistance and very strong environmental protection performance. The chemical properties are also very good. Pe water pipes are made of special materials and special processes. In addition, the service life of PE water pipes is also very long. The most important thing is that PE water pipes are harmless and economical, so the water delivery is very safe and smooth.

Tubatu Online provides you with "every decoration quotation, 1-4 local decoration companies, 3 sets of decoration design schemes" and the decoration pit avoidance strategy for free! Click this link:/Zhu Ye /zxbj-cszy.php? to8to _ from = SEO _ zhidao _ m _ jiare & amp； Wb, you can get it for free ~