How to be sofa cover? Tell me from experience.

Sofa cover is not only beautiful, but also easy to disassemble and wash, which can protect our sofa well. Generally, sofa cover is made according to the following steps: material: 1. High density cotton canvas 10 meter (I won't count the materials, I bought too much). This cloth must be washed first, because it will shrink. 2. A cotton rope with a diameter of about 5 mm is used for teeth. 3. Wool zipper is also called velcro (I bought a roll).

Cutting: I did it in the most stupid way, part by part. The backrest, cushion and back are separated, which is convenient for the disassembly and cleaning of the suit. The place where these two parts need to be connected is the wool zipper, also known as velcro.

Take the backrest as an example, first measure the size of the part to be made, the front. Side. Top. Bottom. After the length and width of the back are increased by 1 inch, it is almost 0.4-0.5 inch on both sides. If there is anything inappropriate, I will change it at any time, especially at the corner. I almost went back to work, which was quite stupid.

It should be noted that there must be more allowance when cutting, and it is easy to rework and change after sewing. Of course, this is a piece of cake for people like me who "do engineering" for the first time and for people who have learned clothing cutting. This is a piece of cloth for teeth. Cut it to a width of 1 inch, and I left a lot. Actually, 1 inch is enough.